Catalysts, polymer-bound

Allylic acetoxy groups can be substituted by amines in the presence of Pd(0) catalysts. At substituted cyclohexene derivatives the diastereoselectivity depends largely on the structure of the palladium catalyst. Polymer-bound palladium often leads to amination at the same face as the aoetoxy leaving group with regioselective attack at the sterically less hindered site of the intermediate ri -allyl complex (B.M. Trost, 1978). 

TEAA, K3Fe(CN)6 and non-heme iron catalysts.Polymer-bound 0s04, and encapsulated OSO4 have been shown to give the diol in the presence of as well as OSO4 on an ion exchange resin. DUiydroxylation has... 

In practice, 1—10 mol % of catalyst are used most of the time. Regeneration of the catalyst is often possible if deemed necessary. Some authors have advocated systems in which the catalyst is bound to a polymer matrix (triphase-catalysis). Here separation and generation of the catalyst is easy, but swelling, mixing, and diffusion problems are not always easy to solve. Furthermore, triphase-catalyst decomposition is a serious problem unless the active groups are crowns or poly(ethylene glycol)s. Commercial anion exchange resins are not useful as PT catalysts in many cases. 

A polymer-bound hindered amine light stabilizer [P-HALS] has been synthesized by terminating the living anionic polymerization of isoprene with 4(2,3-epoxy pro-poxy)-1,2,2,6,6-pentamethylpiperidine followed by hydrogenation of the resulting polymer to E-P copolymer using Zeigler type catalyst [40] ... 

The polymer-bound catalysts A-C. (Table 31) are prepared by reaction of the corresponding amino alcohols with partially chloromethylated 1 -2% cross-linked polystyrene. In the case of A, the enantioselectivity of the addition of dialkylzincs to aldehydes is higher than with the corresponding monomeric ephedrine derivatives (vide supra). Interesting insights into the mechanism of the alkylation of aldehydes by dialkylzinc reagents can be obtained from the experi-... 

Chemistry on solid support has gained tremendous importance during the last few years, mainly driven by the needs of the pharmaceutical sciences. Due to the robust and tolerable nature of the available catalysts, metathesis was soon recognized as a useful technique in this context. Three conceptually different, RCM-based strategies are outlined in Fig. 11. In the approach delineated in Fig. 1 la, a polymer-bound diene 353 is subjected to RCM. The desired product 354 is formed with concomitant traceless release from the resin. This strategy is very favorable, since only compounds with the correct functionality will be liberated, while unwanted by-products remain attached to the polymer. However, as the catalyst is captured in this process by the matrix (355), a higher catalyst loading will be required, or ancillary alkenes have to be added to liberate the catalyst. 

Supported Lewis acids are an interesting class of catalysts because of their operational simplicity, filterability and reusability. The polymer-bound iron Lewis-acid 53 (Figure 3.8) has been found [52] to be active in the cycloadditions of a, S-unsaturated aldehydes with several dienes. It has been prepared from (ri -vinylcyclopentadienyl)dicarbonylmethyliron which was copolymerized with divinylbenzene and then treated with trimethylsilyltriflate followed by THF. Some results of the Diels-Alder reactions of acrolein and crotonaldehyde with isoprene (2) and 2,3-dimethylbutadiene (4) are summarized in Equation 3.13. 

Alternatively, 3-phenyl pyrazinone was prepared via Suzuki reaction, when a polymer-bound pyrazinone was irradiated with 4 equiv of phenylboronic acid, 5 equiv of Na2C03 and 20 mol % of Pd[P(Ph)3]4 as the catalyst in DMF as the solvent (Scheme 36). Contrary to the results obtained in solution phase [29], all attempts to drive the reaction toward the formation of disub-stituted compound, using higher equivalents of reagents or longer reaction times, were unsuccessful. Apphcation of aqueous conditions afforded mixtures of 3-mono and 3,5-disubstituted pyrazinones. 

Acid derivatives that can be converted to amides include thiol acids (RCOSH), thiol esters (RCOSR), ° acyloxyboranes [RCOB(OR )2]. silicic esters [(RCOO)4Si], 1,1,1-trihalo ketones (RCOCXa), a-keto nitriles, acyl azides, and non-enolizable ketones (see the Haller-Bauer reaction 12-31). A polymer-bound acyl derivative was converted to an amide using tributylvinyl tin, trifluoroacetic acid, AsPh3, and a palladium catalyst. The source of amine in this reaction was the polymer itself, which was an amide resin. 

Polymer bound HOBt as a catalyst was used in the synthesis of seven (23 % yield), nine (13%) eleven (5%) and thirteen-membered ring lactams (34%) [13c]. 

Since catalysts immobilised on hydrophilic silica gel often give superior performances to their polymer-bound or polymer-incorporated analogues for multiple applications, Heckel and Seebach have immobilised TADDOL derivatives on hydrophobic controlled-pore glass (CPG) silica gel. Indeed, CPG is... 

The polymers were converted to supported catalysts corresponding to homogeneous complexes of cobalt, rhodium and titanium. The cobalt catalyst exhibited no reactivity in a Fischer-Tropsch reaction, but was effective in promoting hydroformylation, as was a rhodium analog. A polymer bound titanocene catalyst maintained as much as a 40-fold activity over homogeneous titanocene in hydrogenations. The enhanced activity indicated better site isolation even without crosslinking. 

Modes of attachment of functional groups to crosslinked polystyrene are discussed ( 1). Attention is drawn to improved stability and activity of polymer-bound reagents and catalysts incorporating dimethylene spacer between polystyrene aryl and functional group heteroatom, and the simplicity and versatility of their synthesis through high-conversion functional group modifications. 

Phthalimide and N-alkyl-toluenesulfonamide salts are similarly alkylated, and can furthermore be cleaved to polymer-bound secondary and primary amines respectively (57). Potassium pyrrolidonide gives polymer-bound tertiary amide, of interest as a solid cosolvent catalyst ... 

Supemucleophilic polymers containing the 4-(pyrro-lidino)pyridine group were synthesized from the corresponding maleic anhydride copolymers and also by cyclopolymerization of N-4-pyridyl bis(methacryl-imide). The resulting polymers were examined for their kinetics of quaternization with benzyl chloride and hydrolysis of pj-nitrophenylacetate. In both instances, the polymer bound 4-(dialkylamino)pyridine was found to be a superior catalyst than the corresponding low molecular weight analog. 

Kinetic Studies. The pioneering work of Hierl et al. (8) and Delaney et al. (9) had established that hydrolysis of jr-nitro-phenylcarboxylates was an excellent means of observing the nucleophilic catalysis by 4-(dialkylamino) pyridine functionalized polymers. Hydrolysis of p-nitrophenylacetate in a buffer at pH 8.5 showed that the polymer was a slightly better catalyst than the monomeric analog PPY (Table II). However, preliminary results indicate that the polymer bound 4-(dialkylamino) pyridine is more effective as a catalyst than the monomeric analog in the hydrolysis of longer carbon chain p-nitrophenylcarboxylates, such as p-nitrophenylcaproate. 

The insoluble polymer-supported Rh complexes were the first immobilized chiral catalysts.174,175 In most cases, however, the immobilization of chiral complexes caused severe reduction of the catalytic activity. Only a few investigations of possible causes have been made. The pore size of the insoluble support and the solvent may play important roles. Polymer-bound chiral Mn(III)Salen complexes were also used for asymmetric epoxidation of unfunctionalized olefins.176,177... 

The rate for the simple polymer-bound TADDOLate published in [107] was taken from [110]. Newer results show a similar rate for both polymer-bound catalysts described herein. 

Several combinatorial approaches to the discovery of transition metal based catalysts for olefin polymerization have been described. In one study Brookhart-type polymer-bound Ni- and Pd-(l,2-diimine) complexes were prepared and used in ethylene polymerization (Scheme 3).60,61 A resin-bound diketone was condensed with 48 commercially available aminoarenes having different steric properties. The library was then split into 48 nickel and 48 palladium complexes by reaction with [NiBr2(dme)] and [PdClMe(COD)], respectively, all 96 pre-catalysts being spatially addressable. 

As discussed in Section 7.1.4, polymer-bound acetoacetates can be used as precursors for the solid-phase synthesis of enones [33], For these Knoevenagel condensations, the crucial step is to initiate enolization of the CH acidic component. In general, enolization can be initiated with a variety of catalysts (for example, piperidine, piperidinium acetate, ethylenediamine diacetate), but for the microwave-assisted procedure piperidinium acetate was found to be the catalyst of choice, provided that the temperature was kept below 130 °C. At higher reaction temperatures, there is significant cleavage of material from the resin. 

Several microwave-assisted protocols for soluble polymer-supported syntheses have been described. Among the first examples of so-called liquid-phase synthesis were aqueous Suzuki couplings. Schotten and coworkers presented the use of polyethylene glycol (PEG)-bound aryl halides and sulfonates in these palladium-catalyzed cross-couplings [70]. The authors demonstrated that no additional phase-transfer catalyst (PTC) is needed when the PEG-bound electrophiles are coupled with appropriate aryl boronic acids. The polymer-bound substrates were coupled with 1.2 equivalents of the boronic acids in water under short-term microwave irradiation in sealed vessels in a domestic microwave oven (Scheme 7.62). Work-up involved precipitation of the polymer-bound biaryl from a suitable organic solvent with diethyl ether. Water and insoluble impurities need to be removed prior to precipitation in order to achieve high recoveries of the products. 

---