Poly transitions

While the v-a plots for ionized monolayers often show no distinguishing features, it is entirely possible for such to be present and, in fact, for actual phase transitions to be observed. This was the case for films of poly(4-vinylpyri-dinium) bromide at the air-aqueous electrolyte interface [118]. In addition, electrostatic interactions play a large role in the stabilization of solid-supported lipid monolayers [119] as well as in the interactions between bilayers [120]. 

If tlie level(s) associated witli tlie defect are deep, tliey become electron-hole recombination centres. The result is a (sometimes dramatic) reduction in carrier lifetimes. Such an effect is often associated witli tlie presence of transition metal impurities or certain extended defects in tlie material. For example, substitutional Au is used to make fast switches in Si. Many point defects have deep levels in tlie gap, such as vacancies or transition metals. In addition, complexes, precipitates and extended defects are often associated witli recombination centres. The presence of grain boundaries, dislocation tangles and metallic precipitates in poly-Si photovoltaic devices are major factors which reduce tlieir efficiency. 

Figure 3.16 Some experimental dynamic components, (a) Storage and loss compliance of crystalline polytetrafluoroethylene measured at different frequencies. [Data from E. R. Fitzgerald, J. Chem. Phys. 27 1 180 (1957).] (b) Storage modulus and loss tangent of poly(methyl acrylate) and poly(methyl methacrylate) measured at different temperatures. (Reprinted with permission from J. Heijboer in D. J. Meier (Ed.), Molecular Basis of Transitions and Relaxations, Gordon and Breach, New York, 1978.)...

With T as the independent variable, the transition between glassy and rubbery behavior can be read directly at Tg. Note that Tg is about 100° lower for poly(methyl acrylate) than for poly(methyl methacrylate). 

It is not the purpose of this book to discuss in detail the contributions of NMR spectroscopy to the determination of molecular structure. This is a specialized field in itself and a great deal has been written on the subject. In this section we shall consider only the application of NMR to the elucidation of stereoregularity in polymers. Numerous other applications of this powerful technique have also been made in polymer chemistry, including the study of positional and geometrical isomerism (Sec. 1.6), copolymers (Sec. 7.7), and helix-coil transitions (Sec. 1.11). We shall also make no attempt to compare the NMR spectra of various different polymers instead, we shall examine only the NMR spectra of different poly (methyl methacrylate) preparations to illustrate the capabilities of the method, using the first system that was investigated by this technique as the example. 

Poly(vinylchloride). Cellular poly(vinyl chloride) is prepared by many methods (108), some of which utili2e decompression processes. In all reported processes the stabili2ation process used for thermoplastics is to cool the cellular state to a temperature below its second-order transition temperature before the resia can flow and cause coUapse of the foam. 

Melting transition for poly(dimethylsiloxane) graft segment. 

T is the glass-transition temperature at infinite molecular weight and is the number average molecular weight. The value of k for poly(methyl methacrylate) is about 2 x 10 the value for acrylate polymers is approximately the same (9). A detailed discussion on the effect of molecular weight on the properties of a polymer may be found in Reference 17. 

Short segments of poly(dG—dC) incorporated within plasmids, or citcular DNA, adopt the Z-conformation under negative superhehcal stress. This left-handed DNA may be important in genetic control. On the other hand, the stmctural alteration of the helix requited in a B-to-Z transition within a plasmid is radical, and would involve either a multistep mechanism or the complete melting and reformation of helix. The improbability of such transitions has led to questions concerning the feasibility of a biological role for Z-DNA. 

A plasticizer is a substance the addition of which to another material makes that material softer and more flexible. This broad definition encompasses the use of water to plasticize clay for the production of pottery, and oils to plasticize pitch for caulking boats. A more precise definition of plasticizers is that they are materials which, when added to a polymer, cause an increase in the flexibiUty and workabiUty, brought about by a decrease in the glass-transition temperature, T, of the polymer. The most widely plasticized polymer is poly(vinyl chloride) (PVC) due to its excellent plasticizer compatibility characteristics, and the development of plasticizers closely follows the development of this commodity polymer. However, plasticizers have also been used and remain in use with other polymer types. 

Soft-drink bottles made from poly(ethylene terephthalate) (PET) are usuady made by stretch-blow mol ding in a two-step process. Eirst, a test-tube-shaped preform is molded, which is then reheated to just above its glass-transition temperature, stretched, and blown. Stretching the PET produces biaxial orientation, which improves transparency, strength, and toughness of the botde (54,56). A one-step process is used for many custom containers that are injection stretch-blow molded. 

Fig. 2. Glass-transition temperature—molecular weight relationship for poly(ethylene oxide) (-) represents classical T —mol wt relationship Q, data from...

Fig. 2. Glass-transition temperature, T, for two commercially available, miscible blend systems (a) poly(phenylene oxide) (PPO) and polystyrene (PS) (42) ...

In the early 1950s, Ziegler observed that certain heterogeneous catalysts based on transition metals polymerized ethylene to a linear, high density material at modest pressures and temperatures. Natta showed that these catalysts also could produce highly stereospecific poly-a-olefins, notably isotactic polypropylene, and polydienes. They shared the 1963 Nobel Prize in chemistry for their work. 

In another process for the synthesis of PPS, as well as other poly(arylene sulfide)s and poly(arylene oxide)s, a pentamethylcyclopentadienylmthenium(I) TT-complex is used to activate -dichlorobenzene toward displacement by a variety of nucleophilic comonomers (92). Important facets of this approach, which allow the polymerization to proceed under mild conditions, are the tremendous activation afforded by the TT-coordinated transition-metal group and the improved solubiUty of the resultant organometaUic derivative of PPS. Decomplexation of the organometaUic derivative polymers may, however, be compHcated by precipitation of the polymer after partial decomplexation. 

Carbon Cha.in Backbone Polymers. These polymers may be represented by (4) and considered derivatives of polyethylene, where n is the degree of polymeriza tion and R is (an alkyl group or) a functional group hydrogen (polyethylene), methyl (polypropylene), carboxyl (poly(acryhc acid)), chlorine (poly(vinyl chloride)), phenyl (polystyrene) hydroxyl (poly(vinyl alcohol)), ester (poly(vinyl acetate)), nitrile (polyacrylonitrile), vinyl (polybutadiene), etc. The functional groups and the molecular weight of the polymers, control thek properties which vary in hydrophobicity, solubiUty characteristics, glass-transition temperature, and crystallinity. 

---