Poly styrene, synthetic

Thinners and dispersants are used to prevent excessive flocculation of clay particles and maintain pumpability of the fluid. Tannins, various lignosulfonate salts, sodium tetraphosphate and other phosphates, and synthetic polymers such as sodium poly(styrene sulfonate-co-maleic anhydride) have been used. 

The absorption and emission of radiation in the near ultraviolet (UV) and visible regions of the electromagnetic spectrum are associated with electronic (and associated vibronic) transitions involving n- and/or n-electron systems of molecules. Synthetic and natural polymers absorb in the UV region and particularly strong absorption spectra are recorded for polymers containing aromatic and heteroaromatic groups (e.g., poly(styrenes), poly(vinyl naphthalenes), poly(vinyl carbazoles)). 

Gauthier and M oiler [4] described in 1991 the use of anionic polymerization and grafting techniques to prepare poly(styrenes) with a dendritic structure. Styrene is well suited to be incorporated into a synthetic scheme aimed at producing... 

The synthetic methods and chemical characterization data for the various polymeric materials to be discussed in this work have been reported elsewhere [6-8]. In some cases copolymerization of the unchlorinated oxazolidinone monomer with other common monomers such as acrylonitrile, vinyl chloride, styrene, and vinyl acetate, using potassium persulfate as an initiator, was performed. In other cases the unchlorinated oxazolidinone monomer was grafted onto polymers such as poly(acrylonitrile), poly(vinyl chloride), poly(styrene), poly(vinyl acetate), and poly(vinyl alcohol), again using potassium persulfate as an initiator. 

Postsulfonation of polymers to form PEMs can lead to undesirable side reactions and may be hard to control on a repeatable basis. Synthesis of sulfonated macromolecules for use in PEMs by the direct reaction of sulfonated comonomers has gained attention as a rigorous method of controlling the chemical structure, acid content, and even molecular weight of these materials. While more challenging synthetically than postsulfonation, the control of the chemical nature of the polymer afforded by direct copolymerization of sulfonated monomers and the repeatability of the reactions allows researchers to gain a more systematic understanding of these materials properties. Sulfonated poly(arylene ether)s, sulfonated poly-(imide)s, and sulfonated poly(styrene) derivatives have been the most prevalent of the directly copolymerized materials. 

Sulfonated poly(arylene ether)s have shown promise for durability in fuel cell systems, while poly-(styrene)- and poly(imide)-based systems serve as model systems for studying structure-relationship properties in PEMs because their questionable oxidative or hydrolytic stability limits their potential application in real fuel cell systems. Sulfonated high performance polymer backbones, such as poly(phe-nylquinoxaline), poly(phthalazinone ether ketone)s, polybenzimidazole, and other aromatic or heteroaromatic systems, have many of the advantages of poly-(imides) and poly(arylene ether sulfone)s and may offer another route to advanced PEMs. These high performance backbones would increase the hydrated Tg of PEMs while not being as hydrolytically sensitive as poly(imides). The synthetic schemes for these more exotic macromolecules are not as well-known, but the interest in novel PEMs will surely spur developments in this area. 

A large number of macromolecules possess a pronounced amphiphilicity in every repeat unit. Typical examples are synthetic polymers like poly(l-vinylimidazole), poly(JV-isopropylacrylamide), poly(2-ethyl acrylic acid), poly(styrene sulfonate), poly(4-vinylpyridine), methylcellulose, etc. Some of them are shown in Fig. 23. In each repeat unit of such polymers there are hydrophilic (polar) and hydrophobic (nonpolar) atomic groups, which have different affinity to water or other polar solvents. Also, many of the important biopolymers (proteins, polysaccharides, phospholipids) are typical amphiphiles. Moreover, among the synthetic polymers, polyamphiphiles are very close to biological macromolecules in nature and behavior. In principle, they may provide useful analogs of proteins and are important for modeling some fundamental properties and sophisticated functions of biopolymers such as protein folding and enzymatic activity. 

Soluble carriers include antibodies and soluble synthetic polymers such as poly(hydroxypropyl methacrylate), poly(lysine), poly(aspartic acid), polyvinylpyrrolidone), poly(N-vinyl-2-pyrrolidone-co-vinylamide) and poly (styrene co-maleic acid/anhydride). 

Th-FFF can be applied to almost all kinds of synthetic polymers, like polystyrene, polyolefins, polybutadiene, poly(methyl methacrylate), polyisoprene, polysulfone, polycarbonate, nitrocelluloses and even block copolymers [114,194,220]. For some polymers like polyolefins, with a small thermal diffusion coefficient, high temperature Th-FFF has to be applied [221]. Similarly, hydrophilic polymers in water are rarely characterized by Th-FFF, due to the lack of a significant thermal diffusion (exceptions so far poly(ethylene oxide), poly(vi-nyl pyrrolidone) and poly(styrene sulfonate)) [222]. Thus Th-FFF has evolved as a technique for separating synthetic polymers in organic solvents [194]. More recently, both aqueous and non-aqueous particle suspensions, along with mixtures of polymers and particles, have been shown to be separable [215]. 

Kong, Q., Y. Hu, H. Lu, Z. Chen, and W. Fan. 2005. Synthesis and properties of poly-styrene/Fe-montmorillonite nanocomposites using synthetic Fe-montmorillonite by bulk polymerization. J. Mater. Sci. 40 4505-4509. 

Polymers and copolymers were laboratory-prepared samples. Samples W4 and W7 of the diblock copolymer AB poly(styrene-fo-tetramethylene oxide) (PS—PT) were synthesized by producing a polystyrene prepolymer whose terminal group was transformed to a macroinitiator for the polymerization of THF. Samples B13 and B16 of the diblock copolymer AB poly[styrene-h-(dimethyl siloxane)] (PS-PDMS) were prepared by sequential anionic polymerization. Samples of statistical copolymers of styrene and n-butyl methacrylate (PSBMA) were produced by radical copolymerization. Details of synthetic and characterization methods have been reported elsewhere (15, 17-19). 

Petro M, Svec F, Gitsov I, and Frechet JMJ. Molded monolithic rod of macroporous poly(styrene-co-divinylbenzene) as a separation medium for HPLC of synthetic polymers. Anal. Chem. 1996 68 315-321. 

---