Poly nature

Greger considered these ionic polymer systems to be colloids, and indeed they do possess behavior similar to hydrophylic colloids. " Because of the complexity of the strongly acidic, ionic-covalent poly nature of the system, no definitive experiments have been made to determine whether or not the solutions are true solutions or colloidal dispersions. Perhaps light scattering would be one of the simpler approaches, but I am unaware of this technique being applied to the system. 

Other polymers, such as poly methacrylates, have been studied, as well as esters of naturally occurring polysaccharides. References can be found in the literature cited in the list of further reading. 

Mention may here be made of the fact that natural unvulcanised rubber is poly-isoprene (2-methylbutadiene) ... 

Coordination polymerization of isoprene using Ziegler-Natta catalyst systems (Section 6 21) gives a material similar in properties to natural rubber as does polymerization of 1 3 butadiene Poly(1 3 buta diene) is produced in about two thirds the quantity of SBR each year It too finds its principal use in tires... 

The term polymer is derived from the Greek words poly and meros, meaning many parts. We noted in the last section that the existence of these parts was acknowledged before the nature of the interaction which held them together was known. Today we realize that ordinary covalent bonds are the intramolecular forces which keep the polymer molecule intact. In addition, the usual type of intermolecular forces—hydrogen bonds, dipole-dipole interactions, and London forces—hold assemblies of these molecules together in the bulk state. The only thing that is remarkable about these molecules is their size, but that feature is remarkable indeed. 

The nature of the solvent is as important as the polymer in determining , as is apparent from the wide range of values for poly (dimethyl siloxane) in different solvents. 

Emulsion Adhesives. The most widely used emulsion-based adhesive is that based upon poly(vinyl acetate)—poly(vinyl alcohol) copolymers formed by free-radical polymerization in an emulsion system. Poly(vinyl alcohol) is typically formed by hydrolysis of the poly(vinyl acetate). The properties of the emulsion are derived from the polymer employed in the polymerization as weU as from the system used to emulsify the polymer in water. The emulsion is stabilized by a combination of a surfactant plus a coUoid protection system. The protective coUoids are similar to those used paint (qv) to stabilize latex. For poly(vinyl acetate), the protective coUoids are isolated from natural gums and ceUulosic resins (carboxymethylceUulose or hydroxyethjdceUulose). The hydroHzed polymer may also be used. The physical properties of the poly(vinyl acetate) polymer can be modified by changing the co-monomer used in the polymerization. Any material which is free-radically active and participates in an emulsion polymerization can be employed. Plasticizers (qv), tackifiers, viscosity modifiers, solvents (added to coalesce the emulsion particles), fillers, humectants, and other materials are often added to the adhesive to meet specifications for the intended appHcation. Because the presence of foam in the bond line could decrease performance of the adhesion joint, agents that control the amount of air entrapped in an adhesive bond must be added. Biocides are also necessary many of the materials that are used to stabilize poly(vinyl acetate) emulsions are natural products. Poly(vinyl acetate) adhesives known as "white glue" or "carpenter s glue" are available under a number of different trade names. AppHcations are found mosdy in the area of adhesion to paper and wood (see Vinyl polymers). 

Other thickeners used include derivatives of ceUulose such as methylceUulose, hydroxypropylmethylceUulose, and ceUulose gum natural gums such as tragacanth and xanthan (see Cellulose ethers Gums) the carboxyvinyl polymers and the poly(vinyl alcohol)s. The magnesium aluminum siHcates, glycol stearates, and fatty alcohols in shampoos also can affect viscosity. 

Derivatives of hemicellulose components have properties similar to the ceUulosic equivalents but modified by the effects of thek lower molecular weight, more extensive branching, labile constituents, and more heterogeneous nature. Acetates, ethers, carboxymethylxylan (184), and xylan—poly(sodium acrylate) (185) have been prepared. 

Lead sesquioxide is used as an oxidation catalyst for carbon monoxide ia exhaust gases (44,45) (see Exhaust control), as a catalyst for the preparation of lactams (46) (see Antibiotics, P-lactams), ia the manufacture of high purity diamonds (47) (see Carbon, diamond-natural), ia fireproofing compositions for poly(ethylene terephthalate) plastics (48), ia radiation detectors for x-rays and nuclear particles (49), and ia vulcanization accelerators for neoprene mbber (50). 

Fig. 37. Diffusion coefficient as a function of molar volume for a variety of permeants in natural mbber and in poly(vinyl chloride) (PVC) (81—83).

The seam closure on a folding carton is typicahy made using a latex, poly(vinyl acetate), vinyl acetate copolymer, or hot-melt adhesive (27). The choice of adhesive depends on a number of factors, including the nature of any coating used on the package and the production speeds required. 

Thickeners. Thickeners are added to remover formulas to increase the viscosity which allows the remover to cling to vertical surfaces. Natural and synthetic polymers are used as thickeners. They are generally dispersed and then caused to swell by the addition of a protic solvent or by adjusting the pH of the remover. When the polymer swells, it causes the viscosity of the mixture to increase. Viscosity is controlled by the amount of thickener added. Common thickeners used in organic removers include hydroxypropylmethylceUulose [9004-65-3], hydroxypropylceUulose [9004-64-2], hydroxyethyl cellulose, and poly(acryHc acid) [9003-01-4]. Thickeners used in aqueous removers include acryHc polymers and latex-type polymers. Some thickeners are not stable in very acidic or very basic environments, so careful selection is important. 

Uses. Phthabc anhydride is used mainly in plasticizers, unsaturated polyesters, and alkyd resins (qv). PhthaUc plasticizers consume 54% of the phthahc anhydride in the United States (33). The plasticizers (qv) are used mainly with poly(vinyl chloride) to produce flexible sheet such as wallpaper and upholstery fabric from normally rigid polymers. The plasticizers are of two types diesters of the same monohydric alcohol such as dibutyl phthalate, or mixed esters of two monohydric alcohols. The largest-volume plasticizer is di(2-ethylhexyl) phthalate [117-81-7] which is known commercially as dioctyl phthalate (DOP) and is the base to which other plasticizers are compared. The important phthahc acid esters and thek physical properties are Hsted in Table 12. The demand for phthahc acid in plasticizers is naturally tied to the growth of the flexible poly(vinyl chloride) market which is large and has been growing steadily. 

Noncrystalline aromatic polycarbonates (qv) and polyesters (polyarylates) and alloys of polycarbonate with other thermoplastics are considered elsewhere, as are aHphatic polyesters derived from natural or biological sources such as poly(3-hydroxybutyrate), poly(glycoHde), or poly(lactide) these, too, are separately covered (see Polymers, environmentally degradable Sutures). Thermoplastic elastomers derived from poly(ester—ether) block copolymers such as PBT/PTMEG-T [82662-36-0] and known by commercial names such as Hytrel and Riteflex are included here in the section on poly(butylene terephthalate). Specific polymers are dealt with largely in order of volume, which puts PET first by virtue of its enormous market volume in bottie resin. 

Denture Adhesives. Fast hydration and gel-forming properties are ideally mated to produce a thick, cushioning fluid between the dentures and gums (100). The biologically inert nature of poly(ethylene oxide) helps reduce unpleasant odors and taste in this type of personal-care product (see... 

Other blends such as polyhydroxyalkanoates (PHA) with cellulose acetate (208), PHA with polycaprolactone (209), poly(lactic acid) with poly(ethylene glycol) (210), chitosan and cellulose (211), poly(lactic acid) with inorganic fillers (212), and PHA and aUphatic polyesters with inorganics (213) are receiving attention. The different blending compositions seem to be limited only by the number of polymers available and the compatibiUty of the components. The latter blends, with all natural or biodegradable components, appear to afford the best approach for future research as property balance and biodegradabihty is attempted. Starch and additives have been evaluated ia detail from the perspective of stmcture and compatibiUty with starch (214). 

---