Poly , covalently

OXO-, see azines, hydrosy-perfaaloallgd-, reactions of, 230 peri effects, 311,361 phenylazo-, reactions of, 241 phosphorylosy-, reactions of, 210 poly-, covalent addition to, 362 positional reactivity of, 172-174, 177-181, 264, 361 quatemization of, 161 quartemization, effect on reactivity, 308... 

The term polymer is derived from the Greek words poly and meros, meaning many parts. We noted in the last section that the existence of these parts was acknowledged before the nature of the interaction which held them together was known. Today we realize that ordinary covalent bonds are the intramolecular forces which keep the polymer molecule intact. In addition, the usual type of intermolecular forces—hydrogen bonds, dipole-dipole interactions, and London forces—hold assemblies of these molecules together in the bulk state. The only thing that is remarkable about these molecules is their size, but that feature is remarkable indeed. 

Functionalized conducting monomers can be deposited on electrode surfaces aiming for covalent attachment or entrapment of sensor components. Electrically conductive polymers (qv), eg, polypyrrole, polyaniline [25233-30-17, and polythiophene/23 2JJ-J4-j5y, can be formed at the anode by electrochemical polymerization. For integration of bioselective compounds or redox polymers into conductive polymers, functionalization of conductive polymer films, whether before or after polymerization, is essential. In Figure 7, a schematic representation of an amperomethc biosensor where the enzyme is covalendy bound to a functionalized conductive polymer, eg, P-amino (polypyrrole) or poly[A/-(4-aminophenyl)-2,2 -dithienyl]pyrrole, is shown. Entrapment of ferrocene-modified GOD within polypyrrole is shown in Figure 7. 

A SEC material should be hydrophilic if it is to be used for biological applications. One such material, introduced by PolyLC in 1990 (8), is silica with a covalently attached coating of poly(2-hydroxyethyl aspartamide) the trade name is PolyHYDROXYETHYL Aspartamide (PolyHEA). This material was evaluated for SEC of polypeptides by P.C. Andrews (University of Michigan) and worked well for the purpose (Fig. 8.1). Because formic acid is a good solvent for polypeptides, Dr. Andrews tried a mobile phase of 50 mM formic acid. The result was a dramatic shift to a lower fractionation range for both Vq and V, (Fig. 8.2) to the point that V, was defined by the elution position of water. 

Following these discoveries, we have made an extensive exj)eri-mental study of covalent hydration and find it is very common, not only in the pteridine series but also in several simpler families of poly-azanaphthalenes. The methods used to diagnose this phenomenon, its... 

Polymalatase may be useful for the tayloring of /3-poly(malic acid) and its derivatives, and for analytical purposes. If the hydrolase is arrested at points of polymer branches or covalently/physically attached ligands, the hydrolase can be used in studies analogous to those known for DNA and exonucleases. 

Small fractions of a similar type of merocyanine dye moieties (Me) were also covalently tagged onto poly(sodium 2-acrylamido-2-methylpropanesulfonate) (AMc-3, 4) and poly[(3-(methacrylamino)propyl)trimethylammonium chloride] (QMc-1, 5) [49], The observed pKobs value of 10.92 for AMc-3 was higher than that for the neutral reference (NMc-3, 6) by 2.24 pH units. By contrast, the... 

Webber et al. [60, 78] also studied the fluorescence quenching of diphenylan-thracene (DPA) covalently bound to poly(methacrylic acid), PMAvDPA (23) [60], and to sodium poly(styrenesulfonate), PSSvDPA (24 )[78]. The fluorescence quenching of the excited DPA moiety by MV2+ and Cu2+ was also highly efficient. For example, with PMAvDPA of 0.073 mol% DPA content, the kq values at pH... 

Sassoon and Rabani [79, 83] constructed an intriguing photoinduced ET system in which the back ET was greatly retarded by the electrostatic repulsion between two different polycations. They prepared poly(3,3-ionene) covalently linked with Ru(bpy)f + (26) and with an iY,Af,/V, Ar -tetraalkyl-/>-phenylenediamine derivative (27). The latter is an electron donor quencher toward the photoexcited Ru(II) complex. 

As has been described in Chapter 4, random copolymers of styrene (St) and 2-(acrylamido)-2-methylpropanesulfonic acid (AMPS) form a micelle-like microphase structure in aqueous solution [29]. The intramolecular hydrophobic aggregation of the St residues occurs when the St content in the copolymer is higher than ca. 50 mol%. When a small mole fraction of the phenanthrene (Phen) residues is covalently incorporated into such an amphiphilic polyelectrolyte, the Phen residues are hydrophobically encapsulated in the aggregate of the St residues. This kind of polymer system (poly(A/St/Phen), 29) can be prepared by free radical ter-polymerization of AMPS, St, and a small mole fraction of 9-vinylphenanthrene [119]. 

The experimental results on poly(methacrylic acid) containing a small mole fraction of either 3-vinylperylene (PMAvPER, (30)) or lV-[12-(4-aminonaphthali-mide)]-2-methylacrylamide (PMAANI, (31)) show charge separation which is efficient for PMAvPER but not much for PMAANI. The quantum yields of charge separation for various chromophores covalently bound to PMA at pH 2.8 are summarized in Table 7. 

Alpert has shown [47] that poly(succinimide)-silica can be further hydrolyzed to poly (aspartic acid)-silica or condensed with [3-alanine in aqueous solution to form a covalently bonded copolymer of 2-carboxyethyl aspartamide and aspartic acid. The content of carboxyl groups generated by this way has not been quantified directly, but the cation-exchange hemoglobin capacity has been measured for a series of the packings. Thus, the optimal concentration of poly(succinimide) used in the synthesis was found to be 2 5%. 

Porous glass (PG) modified with covalently adsorbed poly(p-nitrophenyl acrylate), as described in Sect. 4.1, turned out to be a highly suitable carrier for immobilization of various biospecific ligands and enzymes. When the residual active ester groups of the carrier were blocked by ethanolamine, the immobilized ligands when bound to the solid support via hydrophilic and flexible poly(2-hydroxyethyl acrylamide). The effective biospecific binding provided by the ligands... 

The completely synthesized and covalently bridged chains where separated from poly(ethylene glycol) (PEG) by saponification with triethylamine in methanol. 

A number of approaches are available to improve the morphology and homogeneity of electrochemically deposited conducting polymer films. Priming of the electrode surface with a monolayer of adsorbed or covalently bonded monomer leads to more compact deposits of polyaniline,87,88 poly thiophene,80 and polypyrrole.89,90 Electrode rotation has been shown to inhibit the deposition of powdery overlayers during poly(3-methylthiophene) deposition.81... 

The elasticity of a polymer is its ability to return to its original shape after being stretched. Natural rubber has low elasticity and is easily softened by hearing. Flowever, the vulcanization of rubber increases its elasticity. In vulcanization, rubber is heated with sulfur. The sulfur atoms form cross-links between the poly-isoprene chains and produce a three-dimensional network of atoms (Fig. 19.17). Because the chains are covalently linked together, vulcanized rubber does not soften as much as natural rubber when the temperature is raised. Vulcanized rubber is also much more resistant to deformation when stretched, because the cross-... 

Chen H, Zhang Z, Chen Y, Brook MA, and Sheardown H. Protein repeUant silicone surfaces by covalent immobilization of poly(ethylene oxide). Biomaterials, 2005, 26, 2391-2399. 

Polyphosphazenes sulfonates XIX with the anion covalently attached to the polymer are a new class of cation conductors that have been synthesized by Shriver [625]. They were obtained by reaction of Na0C2H4S03Na with an excess of polydichlorophosphazene in the presence of 15-crown-5, followed by the reaction of the partially substituted product with the sodium salt of poly(ethylene glycol methyl ether). The conductivity at 80 °C of the polymer with x=1.8, m=7.22 is 1.7x10 S cm This low conductivity can be attributed to an extensive ion pair formation between the sodium and sulfonate ions. 

The next two examples illustrate more complex surface reaction chemistry that brings about the covalent immobilization of bioactive species such as enzymes and catecholamines. Poly [bis (phenoxy)-phosphazene] (compound 1 ) can be used to coat particles of porous alumina with a high-surface-area film of the polymer (23). A scanning electron micrograph of the surface of a coated particle is shown in Fig. 3. The polymer surface is then nitrated and the arylnitro groups reduced to arylamino units. These then provided reactive sites for the immobilization of enzymes, as shown in Scheme III. 

Allcock, H. R., and Kwon, S., Covalent linkage of proteins to surface-modified poly(organophosphazenes) Immobilization of glucose-6-phosphate dehydrogenase and trypsin, Macromolecules. 19, 1502, 1986. 

---