Magnesium/aluminum

Most manganese today is obtained from ores found in Russia, Brazil, Australia, Republic of S. Africa, Gabon, and India. Pyrolusite and rhodochrosite are among the most common manganese minerals. The metal is obtained by reduction of the oxide with sodium, magnesium, aluminum, or by elctrolysis. 

Other thickeners used include derivatives of ceUulose such as methylceUulose, hydroxypropylmethylceUulose, and ceUulose gum natural gums such as tragacanth and xanthan (see Cellulose ethers Gums) the carboxyvinyl polymers and the poly(vinyl alcohol)s. The magnesium aluminum siHcates, glycol stearates, and fatty alcohols in shampoos also can affect viscosity. 

Under equiUbrium conditions, magnesium can contain as much as 12.7% aluminum in soHd solution at the eutectic temperature. However, the slow diffusion of aluminum to the grain boundary leads to a coring effect in primary crystals and a hard-phase magnesium—aluminum compound(17 12)... 

In commercial alloys, 2inc is usually dissolved in the magnesium matrix and in the hard magnesium—aluminum phase when aluminum is present. Zinc additions to magnesium—aluminum alloys change the eutectic stmcture to a so-called divorced eutectic, characteri2ed by the presence of massive compound particles surrounded by a magnesium-rich sohd solution. 

Sodium ethoxide was the first metal alkoxide described in 1837 (1). The alkoxides of many transition metals were developed after World War II (2—5). Today some alkoxides, including those of sodium, potassium, magnesium, aluminum, zirconium, and titanium, are commercially important. The name metal alkoxides is preferred, although metal alcoholates is also used. 

Strontium [7440-24-6] Sr, is in Group 2 (IIA) of the Periodic Table, between calcium and barium. These three elements are called alkaline-earth metals because the chemical properties of the oxides fall between the hydroxides of alkaU metals, ie, sodium and potassium, and the oxides of earth metals, ie, magnesium, aluminum, and iron. Strontium was identified in the 1790s (1). The metal was first produced in 1808 in the form of a mercury amalgam. A few grams of the metal was produced in 1860—1861 by electrolysis of strontium chloride [10476-85-4]. 

Some cutting fluids, eg, oils, may present a fire ha2ard. Some work materials, eg, magnesium, aluminum, titanium (under certain conditions), and uranium, in finely divided form, also present fire ha2ards. Very small metal chips or dust may ignite. 

Other Arsenic Hydrides. Diarsine [15942-63-9] AS2H4, occurs as a by-product in the preparation of arsine by treatment of a magnesium aluminum arsenide alloy with dilute sulfuric acid and also may be prepared by passing arsine at low pressure through an ozonizer-type discharge tube (19). Diarsine is fairly stable as a gas but quite unstable (above — 100°C) in condensed phases. The for diarsine is +117 4 kJ/mol (28 1 kcal/mol) and... 

Impurities ate elirninated in fire refining in the foUowing sequence slag, that is, oxides of iron, magnesium, aluminum, and sihcon fluxing, that is, arsenic and antimony and vapors, that is, sulfur (as SO2), cadmium, and zinc. 

X-ray analysis of material scraped from internal surfaces indicated that it was 88% iron, 7% silicon, and 1% each of magnesium, aluminum, chlorine and sulfur. 

Sufficient heat is generated to ignite the hydrogen gas so that it can react explosively with the oxygen in air. Metals like magnesium, aluminum, titanium, and zirconium in pure form also react with water to release Hj, but heat must be supplied to initiate the reaction. The generalized representation is ... 

Direct Current (DC). This current is transmitted for industrial uses only in exceptional situations. The most common sources of direct current are storage batteries and industrial devices called rectifiers, in which alternating current is changed (rectified) to direct current, as is used in electrolytic cells for the manufacture of chlorine gas, magnesium, aluminum, and a few other chemicals. The direct current is flowing from the source through the user application and back to the source, in one direction. The motor is primarily used for speed control of selected equipment. 

Not all metals react with aqueous acids. Among the common metals, magnesium, aluminum, iron, and nickel liberate H2 as zinc does. Other metals, including copper, mercury, silver, and gold, do not produce measurable amounts of hydrogen even though we make sure that the equilibrium state has been attained. With these metals, hydrogen is not produced and it is surely not just because of slow reactions. Apparently... 

Magnesium-Aluminum Powder Composition and Granulation Requirements. MS... 

When Mg is alloyed with Al, for use in some incendiary, tracer and photoflash compns, the requirements of the US Armed Forces are given in the Mil Spec entitled, Magnesium-Aluminum Alloy, Powdered (Ref 1). It covers two types of Mg-Al alloy, Type A (50/50), and Type B (65/35)... 

Refs 1) US Joint Army-Navy Specification JAN-M-454 (21 Feb 1947) with Amendment 1 (15 Feb 1952), Magnesium-Aluminum Alloy, Powdered 2) N.H. Furman, Scott s Standard Methods of Chemical Analysis , 5th Ed, Vol 1, Van Nostrand, Princeton, NJ (1961), 539—53 3) US Military Specification... 

Dry Copper, brass, aluminum, magnesium, magnesium-aluminum alloy, stainless steel, mild steel, mild steel coated with acid-proof black paint and mild steel plated with copper, cadmium, nickel or zinc are not affected... 

The coagulant sodium aluminate (NaA102) is strongly caustic (contributing hydroxide alkalinity to the BW) and reacts with calcium and magnesium salts and any silica present to form a zeolite sludge of calcium-magnesium-aluminum silcate. 

---