Poly chromatography studies

Pyrolysis-gas chromatography studies of various poly(alkylene terephthalate)s (PAT) [16] appear to show very similar fragmentation products occur in all the materials studied (polyesters with 2-6 methylene groups). Various fragments with acid and/or unsaturated chain ends were identified, and decarboxylation reactions also confirmed. From PBT, the following species were identified ... 

GAL Galin, M., Gas-liquid chromatography study of poly(ethylene oxide)-solvent interactions. A molecular approach to solvation mechanisms, Polymer, 25, 1784, 1984. 

WAR Ward, T.C., Sheeny, D.P., Riffle, J.S., and McGrath, J.E., Inverse gas chromatography studies of poly(dimethylsiloxane)-polycarbonate copol mers and blends. Macromolecules, 14, 1791, 1981. 

Poly(ethylene oxide). The synthesis and subsequent hydrolysis and condensation of alkoxysilane-terniinated macromonomers have been studied (39,40). Using Si-nmr and size-exclusion chromatography (sec) the evolution of the siUcate stmctures on the alkoxysilane-terniinated poly(ethylene oxide) (PEO) macromonomers of controlled functionahty was observed. Also, the effect of vitrification upon the network cross-link density of the developing inorganic—organic hybrid using percolation and mean-field theory was considered. 

Commercial grades of PVP, K-15, K-30, K-90, and K-120 and the quaternized copolymer of vinylpyrrolidone and dimthylaminoethylmethacrylate (poly-VP/ DMAEMA) made by International Specialty Products (ISP) were used in this study. PEO standard calibration kits were purchased from Polymer Laboratories Ltd. (PL), American Polymer Standards Corporation (APSC), Polymer Standards Service (PSS), and Tosoh Corporation (TSK). In addition, two narrow NIST standards, 1923 and 1924, were used to evaluate commercial PEO standards. Deionized, filtered water, and high-performance liquid chromatography grade methanol purchased from Aldrich or Fischer Scientific were used in this study. Lithium nitrate (LiN03) from Aldrich was the salt added to the mobile phases to control for polyelectrolyte effects. 

ADMET polymers are easily characterized using common analysis techniques, including nuclear magnetic resonance ( H and 13C NMR), infrared (IR) spectra, elemental analysis, gel permeation chromatography (GPC), vapor pressure osmometry (VPO), membrane osmometry (MO), thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). The preparation of poly(l-octenylene) (10) via the metathesis of 1,9-decadiene (9) is an excellent model polymerization to study ADMET, since the monomer is readily available and the polymer is well known.21 The NMR characterization data (Fig. 8.9) for the hydrogenated versions of poly(l-octenylene) illustrate the clean and selective nature of ADMET. 

Superheated water at 100°-240 °C, with its obvious benefits of low cost and low toxicity, was proposed as a solvent for reversed-phase chromatography.59 Hydrophobic compounds such as parabens, sulfonamides, and barbiturates were separated rapidly on poly(styrene-divinyl benzene) and graphitic phases. Elution of simple aromatic compounds with acetonitrile-water heated at 30°-130 °C was studied on coupled colums of zirconia coated with polybutadiene and carbon.60 The retention order on the polybutadiene phase is essentially uncorrelated to that on the carbon phase, so adjusting the temperature of one of the columns allows the resolution of critical pairs of... 

We report here the results of our recent studies of poly(alkyl/arylphosphazenes) with particular emphasis on the following areas (1) the overall scope of, and recent improvements in, the condensation polymerization method (2) the characterization of a representative series of these polymers by dilute solution techniques (viscosity, membrane osmometry, light scattering, and size exclusion chromatography), thermal analysis (TGA and DSC), NMR spectroscopy, and X-ray diffraction (3) the preparation and preliminary thermolysis reactions of new, functionalized phosphoranimine monomers and (4) the mechanism of the polymerization reaction. 

All of the organohalogen compounds studied were commercial products obtained from various manufacturers and used as received. Only the DBDPO was purified further by recrystallization for some of the chromatography and thermal analysis experiments. Samples of antimony trioxide and antimony pentoxide were also obtained from commercial sources. The ultrapure antimony trioxide, bismuth trioxide, bismuth metal, antimony metal, dibenzofuran and diphenyl ether were all obtained from Aldrich Chemicals. The poly(propylene) (PP) resin was 0.7 mfi, food grade from Novamont and the poly(ethylene) was unstabilized, high molecular weight, HDPE from American Hoechst. 

Much less work has been focused on the effect of polymer structure on the resist performance in these systems. This paper will describe and evaluate the chemistry and resist performance of several systems based on three matrix polymers poly(4-t-butoxycarbonyloxy-a-methylstyrene) (TBMS) (12), poly(4-t-butoxycarbonyloxystyrene-sulfone) (TBSS) (13) and TBS (14) when used in conjunction with the dinitrobenzyl tosylate (Ts), triphenylsulfonium hexafluoroarsenate (As) and triphenylsulfonium triflate (Tf) acid generators. Gas chromatography coupled with mass spectroscopy (GC/MS) has been used to study the detailed chemical reactions of these systems in both solution and the solid-state. These results are used to understand the lithographic performance of several systems. 

Isotope fractionation between the vapor phase and the dissolved aqueous phase has been studied only for toluene and trichloroethylene (carbon only [545, 690]). Fractionation associated with adsorption has been quantified only for toluene in regard to sample extraction using a poly(dimethylsilo-xane)-coated solid-phase microextraction fiber [373] and qualified for benzene, toluene, and ethylbenzene based on high-pressure liquid chromatography analyses of isotopically labeled and unlabeled compounds (carbon and hydrogen [692]). Isotope fractionation associated with the reductive dechlorination of chlorinated ethylenes by zero-valent iron and zinc has been... 

Arabin, A., Jacobsson, S., Hagman, A., and Ostelius, J. (1986), Studies on contamination of intravenous solutions from poly(vinyl chloride) bags with dynamic headspace gas chromatography-mass spectrometry and gradient liquid chromatography diode array techniques, Int. J. Pharm., 28,211-218. 

---