Poly blended with

Most of the polymer s characteristics stem from its molecular stmcture, which like POE, promotes solubiUty in a variety of solvents in addition to water. It exhibits Newtonian rheology and is mechanically stable relative to other thermoplastics. It also forms miscible blends with a variety of other polymers. The water solubiUty and hot meltable characteristics promote adhesion in a number of appHcations. PEOX has been observed to promote adhesion comparable with PVP and PVA on aluminum foil, cellophane, nylon, poly(methyl methacrylate), and poly(ethylene terephthalate), and in composite systems improved tensile strength and Izod impact properties have been noted. 

Nitrile mbber finds broad application in industry because of its excellent resistance to oil and chemicals, its good flexibility at low temperatures, high abrasion and heat resistance (up to 120°C), and good mechanical properties. Nitrile mbber consists of butadiene—acrylonitrile copolymers with an acrylonitrile content ranging from 15 to 45% (see Elastomers, SYNTHETIC, NITRILE RUBBER). In addition to the traditional applications of nitrile mbber for hoses, gaskets, seals, and oil well equipment, new applications have emerged with the development of nitrile mbber blends with poly(vinyl chloride) (PVC). These blends combine the chemical resistance and low temperature flexibility characteristics of nitrile mbber with the stability and ozone resistance of PVC. This has greatly expanded the use of nitrile mbber in outdoor applications for hoses, belts, and cable jackets, where ozone resistance is necessary. 

Examples of photothermoplasts include polyacrylates, polyacrylamides, polystyrenes, polycarbonates, and their copolymers (169). An especially well-re searched photothermoplast is poly(methyl methacrylate) (PMMA), which is blended with methyl methacrylate (MMA) or styrene as a monomer, and titanium-bis(cyclopentadienyl) as a photoinitiator (170). 

Blends with good mechanical properties can be made from DMPPO and polymers with which DMPPO is incompatible if an appropriate additive, compatibilizing agent, or treatment is used to increase the dispersion of the two phases. Such blends include mixtures of DMPPO with nylon, polycarbonate, polyester, ABS, and poly(phenylene sulfide). 

Also, PBT is blended with poly(ethylene terephthalate) (PET), polysulfone, and SMA (303). PET may also be blended with a number of other engineering polymers, such as PC and impact modifiers. 

The effect of a second polymer blended with PPS which causes enhanced nucleation of PPS has been previously observed. It was found that low concentrations (1—2 wt %) of poly(phenylene sulfide ketone) and poly(ether ether ketone), when melt-blended with PPS, function effectively to increase the nucleation density of PPS (149). 

Other blends such as polyhydroxyalkanoates (PHA) with cellulose acetate (208), PHA with polycaprolactone (209), poly(lactic acid) with poly(ethylene glycol) (210), chitosan and cellulose (211), poly(lactic acid) with inorganic fillers (212), and PHA and aUphatic polyesters with inorganics (213) are receiving attention. The different blending compositions seem to be limited only by the number of polymers available and the compatibiUty of the components. The latter blends, with all natural or biodegradable components, appear to afford the best approach for future research as property balance and biodegradabihty is attempted. Starch and additives have been evaluated ia detail from the perspective of stmcture and compatibiUty with starch (214). 

The oxidative coupling of 2,6-dimethylphenol to yield poly(phenylene oxide) represents 90—95% of the consumption of 2,6-dimethylphenol (68). The oxidation with air is catalyzed by a copper—amine complex. The poly(phenylene oxide) derived from 2,6-dimethylphenol is blended with other polymers, primarily high impact polystyrene, and the resulting alloy is widely used in housings for business machines, electronic equipment and in the manufacture of automobiles (see Polyethers, aromatic). A minor use of 2,6-dimethylphenol involves its oxidative coupling to... 

Poly(ethyl methacrylate) (PEMA) yields truly compatible blends with poly(vinyl acetate) up to 20% PEMA concentration (133). Synergistic improvement in material properties was observed. Poly(ethylene oxide) forms compatible homogeneous blends with poly(vinyl acetate) (134). The T of the blends and the crystaUizabiUty of the PEO depend on the composition. The miscibility window of poly(vinyl acetate) and its copolymers with alkyl acrylates can be broadened through the incorporation of acryUc acid as a third component (135). A description of compatible and incompatible blends of poly(vinyl acetate) and other copolymers has been compiled (136). Blends of poly(vinyl acetate) copolymers with urethanes can provide improved heat resistance to the product providing reduced creep rates in adhesives used for vinyl laminating (137). 

Common conductive polymers are poly acetylene, polyphenylene, poly-(phenylene sulfide), polypyrrole, and polyvinylcarba2ole (123) (see Electrically conductive polymers). A static-dissipative polymer based on a polyether copolymer has been aimounced (124). In general, electroconductive polymers have proven to be expensive and difficult to process. In most cases they are blended with another polymer to improve the processibiUty. Conductive polymers have met with limited commercial success. 

Poly(phenylene ether). The only commercially available thermoplastic poly(phenylene oxide) PPO is the polyether poly(2,6-dimethylphenol-l,4-phenylene ether) [24938-67-8]. PPO is prepared by the oxidative coupling of 2,6-dimethylphenol with a copper amine catalyst (25). Usually PPO is blended with other polymers such as polystyrene (see PoLYETPiERS, Aromatic). However, thermoplastic composites containing randomly oriented glass fibers are available. 

Blends with PVC. Nitrile mbber may be blended with poly(vinyl chloride) (PVC) by the polymer producer by two different techniques (1) blending of NBR latex with PVC latex followed by co-coagulation and drying, or (2) physically mixing the soHd NBR and PVC powder in mixing equipment such as an internal mixer. NBR—PVC polymer blends are well known for the good ozone resistance that is imparted by the PVC. 

Poly(methyl methacrylate) may be blended with a number of additives. Of these the most important are dyes and pigments and these should be stable to both processing and service conditions. Two particular requirements are, firstly, that when used in castings they should not affect the polymerisation reaction and, secondly, that they should have good weathering resistance. 

In a partially crystalline homopolymer, nylon 6, property enhancement has been achieved by blending with a poly(ethylene-co-acrylic acid) or its salt form ionomer [24]. Both additives proved to be effective impact modifiers for nylon 6. For the blends of the acid copolymer with nylon 6, maximum impact performance was obtained by addition of about 10 wt% of the modifier and the impact strength was further enhanced by increasing the acrylic acid content from 3.5 to 6%. However, blends prepared using the salt form ionomer (Sur-lyn 9950-Zn salt) instead of the acid, led to the highest impact strength, with the least reduction in tensile... 

The poly(styrene-b-isoprene) (P(S-b-IP)) and poly(-styrene-b-2-vinyl pyridine) (P(S-b-2VP)) block copolymers with narrow molecular weight distributions for blending with the microspheres were also synthesized using the additional anionic polymerization technique. The number-average molecular weights (Mns) and PS contents are also shown in Table 1. 

Equation (7) depicts the viscosity decrease independent of the chemical features of materials. Also for fixed T, Figs. 7 and 8 demonstrate a further example of a poly-amide-TLCP blend with different weight ratios. The rheological data in Fig. 7 were taken from Siegmann et al. [1]. It is obvious that the lowest blend viscosity is obtained at a TLCP loading of only 5%. This result is... 

Poly(hydroxyphenyl maleimide)-b-PBA was added to thermosetting phenol resin to improve heat resistance [63]. PVC blended with poly(vinyl copolymer having cyclohexyl maleimide group)-b-PVC showed improved heat resistance and tensile strength with thermal stability during processing [64]. 

Polyarylates can be blended with a wide range of commercially available thermoplastics, including polyamides, polycarbonates, polyetherketones, polyesters, and poly(phenylene sulfide), thus broadening their application domain. 

Associations can be of physical nature too. Chitosan blends with hydrophilic polymers including polyvinylalcohol, polyethyleneoxide and poly-vinylpyrrohdone, were investigated as candidates for oral gingival delivery systems. Chitosan blends were superior to chitosan alone in terms of comfort, ease of processing, film quality, and flexibihty [325]. 

Takagi, Y., Yasuda, R., Yamaoka, M. and Yamane, T. 2004. Morphologies and mechanical properties of polylactide blends with medium chain length poly(3-hydroxyalkanoate) and chemically modified poly(3-hydroxyalkanoate). Journal of Applied Polymer Science 93 2363-2369. 

---