Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Plant consolidant

The review of the data portion of the Indian Point 2 (IP2) and 3 (IPS) PRA (a 1982 internal document prepared by Consolidated Edison and the New York Power Authority) is confined to the plant-specific and generic component failure and service hour data sections because these were the only segments available to the reviewers. The LERs produced during a ten-year span of IP2 s operation were evaluated to determine their applicability to the PRA data needs. It was eventually decided to use only the LERs generated after IP2 became critical (from May 23, 1973 to December 31, 1979) for the component data base development, based on the availability of failure event information and more uniform operability, testing, and reporting criteria. [Pg.119]

Make up water for these refrigeration units is at 80°F, and feed water for the gas cooler unit is available at 90°F. Barometric water is 90°F. Items 1 and 2 are for a closed-circuit operation with return water at 68°F and total 175 gpm. Note that in order to consolidate the temperature levels of water, it is economical to establish a temperature, such as 55°F, which satisfies the bulk of the requirement, and then design the other phases of the plant process to also use this water temperature. Item 3 is an open-circuit operation because the water is sent to waste after absorbing certain corrosive vapors and cooling the bulk of the gas. [Pg.299]

In addition, detailed analysis of the chemical and physical properties of different oils used in the plant can, in some cases, allow consolidation or reduction of the number and types of lubricates required to maintain plant equipment. Elimination of unnecessary duplication can reduce required inventory levels and therefore maintenance costs. [Pg.800]

Most outages are comprised of multiple wish lists that are generated by operations, plant engineering and maintenance. In most cases, these lists contain poorly defined tasks with little or no attempt to prioritize them. These lists must be consolidated, prioritized and a universally acceptable scope of work defined. The steps required to create this scope of work include ... [Pg.827]

Industry experts expect this trend to continue single operating units being purchased by owners of multiple plants, leading to a consolidation in the US. nuclear industry with sustainable skilled nuclear workforces, and with the most efficient existing operations well positioned for deregulation. [Pg.55]

Fundamental to the support for nuclear energy is the new attitude in the industry itself. Nuclear electricity producers are adapting well to the onset of competition in the marketplace. We are seeing consolidation, nuclear plant purchases, and the pursuit of license renewals. In this new environment, the U.S. nuclear industry is entertaining something of a renaissance and beginning to take credit for its accomplishments. [Pg.108]

Each painter had his own technique the binding medium was thus prepared using different additives, giving rise to a variety of recipes for each technique. For example, it is believed that fig latex (a white liquid exuded by the fig tree) was commonly added to the egg tempera, and that animal or plant resins were added to oil- and wax-based binders. On account of their adhesive properties, these materials were used not only as paint binders, but also as consolidants in restorations, as ingredients in varnishes used to finish paintings, and as ingredients of mordants to apply metallic leaf decorations. [Pg.304]

Cominco [Consolidated Mining Smelting Company] A process for absorbing sulfur dioxide from smelting operations. The sulfur dioxide is absorbed in an aqueous solution of ammonium sulfite regeneration is by acidification with sulfuric acid. The ammonium sulfate byproduct is sold. Operated at the Cominco smelter at Trail, Canada, and at other smelters and sulfuric acid plants in the United States. Licensed by the Olin Mathieson Corporation. The name has been applied also to a lead extraction process. [Pg.70]

Oceanic zooplankton species, wax esters in, 26 204-205 Ocean ranching, 3 198 Ocean raw materials, 17 684-699 consolidated deposits of, 17 691-694 economic aspects of, 17 697 fluid deposits of, 17 694-695 minerals recovery from, 17 695—697 unconsolidated deposits of, 17 686-691 Ocean resources, global, 17 684—686 Oceans, selenium content of, 22 11. See also Marine entries Seawater Ocean thermal energy conversion (OTEC) power plants, 13 267, 268 26 92-93 Ocean transportation, 25 328 Ochratoxin A, 7 267-268 Ochre (mineral hematite) color, 7 333... [Pg.641]

The production location hierarchy follows a similar logic as distribution locations do Production regions consolidate all production resources within one geographical region to a virtual production region. A production plant combines one or multiple factories at the same site. Finally, a factory is a dedicated physical production block inside the plant holding the production resources. [Pg.139]

Consolidate the Sydney and Melbourne plants into one new membrane cell plant in Sydney or Melbourne. [Pg.146]

Consolidation has also created a pattern of aggressive and capital-intensive product acquisitions in recent years. These have, in turn, resulted in reduced credit ratings for many firms, stock share price declines, and most importantly, significant standing debts.This debt is further aggravated by plant closures and... [Pg.88]

Terminal complex consolidation has also been reported in vascular plants as loosely aligned files of rosettes associated with secondary wall formation (13,14,34,35). Similar rosette files were also observed during primary wall formation in rapidly elongating regions of Avena coleoptiles... [Pg.235]

The primary component of coal is carbonaceous material resulting from the accumulation and decay of plant matter in marine or freshwater environments and marshes (Hessley et al. 1986). As plant matter accumulates it becomes humified and may eventually be consolidated into coal through a process called coalification. In the organic matrix, C is the major element by weight, with smaller amounts of H, O, N, and S, and many trace elements. The abundance of these trace elements is highly variable, but based on the reported trends in the affinity of elements for the organic fraction of coal (Table 1), elements such as B, Ge, Be, Ti, and V are expected to exist primarily within the organics in coal. [Pg.224]

The BLA was established pursuant to the Food and Drug Administration Modernization Act of 1997, consolidating a prior requirement for two applications a Product License Application and an Establishment License Application. The final implementing rule reduced the amount of information a manufacturer is required to file in its BLA application and shifted responsibility to the plant inspection process to ensure that manufacturers complied with cGMP standards. [Pg.36]

During development, evaluation of the consolidated materials was based primarily on two criteria, leachability and the concentration factor, i.e., the concentration of waste oxides on a volume basis. The concentration factor is directly affected by the residual porosity in a consolidated waste as well as by the dilution caused by the addition of consolidation aids. This factor can be as high as 1.2 g/cm3 for a fully dense ( 5 g/cm ) titanate waste prepared from the projected Barnwell plant solution composition. The factor is slightly lower for a titanate waste containing silicon and zeolite additions, which has a typical density of U.2 g/cm3. The leachability was determined by an "instantaneous leach test developed for fast, comparative evaluations of materials, the details of which are described elsewhere (l6). [Pg.139]

Consolidated Diesel of Whitakers, N.C., uses material safety data sheets to screen all hazardous materials coming into the plant (Kohl 1984). The company routes MSDSs through hazardous material and medical personnel during the requisition process. The approval of these individuals is required before a substance is allowed onto the plant site. This ensures that each substance is properly documented and evaluated in terms of its hazardous characteristics prior to its use. This can reduce hazardous waste generation by preventing the use of some materials which would require regulated disposal. [Pg.110]


See other pages where Plant consolidant is mentioned: [Pg.3072]    [Pg.30]    [Pg.3072]    [Pg.30]    [Pg.79]    [Pg.1613]    [Pg.182]    [Pg.13]    [Pg.41]    [Pg.855]    [Pg.882]    [Pg.2]    [Pg.2]    [Pg.370]    [Pg.1234]    [Pg.164]    [Pg.165]    [Pg.318]    [Pg.327]    [Pg.351]    [Pg.5]    [Pg.72]    [Pg.59]    [Pg.45]    [Pg.40]    [Pg.23]    [Pg.235]    [Pg.140]    [Pg.293]    [Pg.302]    [Pg.101]    [Pg.220]    [Pg.189]    [Pg.330]    [Pg.48]   
See also in sourсe #XX -- [ Pg.215 ]




SEARCH



Consolidant

Consolidate

Consolidation

© 2024 chempedia.info