Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Pipeline matching

Potential Surface Reaction Path Synthesis Spectral Matching Pipeline SilverScreen SPACFIL TUTSIM and FANSIM Windows WordPerfect ... [Pg.65]

Sacrificial anode systems operate without external power source. The anodes are reactive metals such as magnesium and zinc or aluminum alloys. The energy for the process is derived from the anode material. Careful design is required to match the output and lifetime of the anodes with the polarization and life-expectancy requirements of the plant. Sacrificial anode CP is used for offshore platforms, sub-sea pipelines and the inside of ballast tanks on tanker ships. [Pg.909]

Classify the bulk solid according to the Dixon (1979, 1981) slugging diagram that matches the existing or proposed diameter of pipeline. Based on the research and consulting experience of the author, the following possibilities are proposed in relation to the Dixon (1979) classifications. [Pg.730]

Another special feature of biologies is that facilities are usually designed for a specific product in mind, with little room for flexibility to match the process developed for alternative products in the pipeline. This is the opposite case from that found in the manufacture of small drug pharmaceuticals where unit operations, lay out, and equipment can be used for multiple products. This makes the decision even more challenging to build a manufacturing facility for biologies. [Pg.150]

The determination of the necessary gas storage capacity is based upon the approach of primarily using the storage as security of supply in case of disruption of the gas imports from Russia. Secondarily, the gas storage could potentially be used for both security of supply and for seasonal load balancing to match peak gas demand in extreme situations caused by several days of extremely low temperatures. But there is less need for seasonal storage because there is surplus capacity in the import pipelines and the transmission system to handle today s gas consumption as well as the gas demand projected in 2020 and in fact beyond that point. [Pg.210]

Frequently, SRV sizes are determined by merely matching the size of an existing available vessel nozzle or the size of an existing pipeline connection. This operating method is extremely dangerous and does not comply with the codes. [Pg.170]

An evaluation of the daily PV electricity output profile to evaluate whether it matches the power requirements of H2 compressors at the electrolysis plant and the pipeline compression station. In other words, can PV electricity be the sole source of power for electrolysis plant and pipeline compression station compressors ... [Pg.305]

Many precautions are taken at refineries to keep out unauthorized visitors. Even authorized visitors are checked to make sure that they carry neither lighter nor matches. A typical refinery may contain hundreds of miles of pipelines with laboratories and numerous instruments which give remote readings of the processes taking place. [Pg.57]

The process control system includes almost all refinery plants, covering not only the process plants but also tankage, pipeline supervision and effluent treatment. The POX/methanol complex and the loading facilities are, however not included in the system. The dispatch computer has been tailored to the details and requirements of the loading operation. The POX/methanol complex is equipped with its own system that is linked with the refinery control room for the purpose of data exchange. Similarly, the refinery power station exchanges data with the refinery control room in order to match the dynamics of supply and demand. [Pg.212]

In contrast to all other means of transport, pipeline transports do not require mobile transport devices. Therefore, the planning of pipeline transports is not concerned with the matching of transport flows and transport carrier flows. Nonetheless, other problems come into scope such as the planning of pumping sequences when the pipeline is used by multiple products. [Pg.53]

If the expected life of a section of pipeline is relatively short, the pipeline operator must decide whether recoating and repair would extend the life of the pipe section to match the rest of the pipeline. If not, replacing the pipe section may be the best solution. [Pg.142]

The equipment support contains support, lead rail and little car system. The wheeltrack of the little car moves flexibly and has small lateral displacement. The whole lead rail is placed on the shore which can adjust height and horizontal shift. It is shown in experiment that it matches with the pipe body integrated with dowel of every pipeline section and it s a high-precision support system of flexible operation. This support is self-designed and manufactured. [Pg.841]

Optimized PE design. The optimization of the PE design depends on the clock frequency needed for matched throughput, the level of hardware multiplexing used, the number of pipeline registers (as few as possible, as many as needed). [Pg.136]


See other pages where Pipeline matching is mentioned: [Pg.333]    [Pg.411]    [Pg.92]    [Pg.292]    [Pg.445]    [Pg.21]    [Pg.156]    [Pg.121]    [Pg.177]    [Pg.278]    [Pg.130]    [Pg.176]    [Pg.85]    [Pg.40]    [Pg.395]    [Pg.400]    [Pg.113]    [Pg.647]    [Pg.279]    [Pg.207]    [Pg.486]    [Pg.154]    [Pg.69]    [Pg.411]    [Pg.338]    [Pg.343]    [Pg.403]    [Pg.90]    [Pg.178]    [Pg.182]    [Pg.5628]    [Pg.1052]    [Pg.1901]    [Pg.136]   
See also in sourсe #XX -- [ Pg.251 ]




SEARCH



© 2024 chempedia.info