Phthalates, metal

Chlorine Ammonia, acetylene, alcohols, alkanes, benzene, butadiene, carbon disulflde, dibutyl phthalate, ethers, fluorine, glycerol, hydrocarbons, hydrogen, sodium carbide, flnely divided metals, metal acetylides and carbides, nitrogen compounds, nonmetals, nonmetal hydrides, phosphorus compounds, polychlorobi-phenyl, silicones, steel, sulfldes, synthetic rubber, turpentine... 

Ketone Peroxides. These materials are mixtures of compounds with hydroperoxy groups and are composed primarily of the two stmctures shown in Table 2. Ketone peroxides are marketed as solutions in inert solvents such as dimethyl phthalate. They are primarily employed in room-temperature-initiated curing of unsaturated polyester resin compositions (usually containing styrene monomer) using transition-metal promoters such as cobalt naphthenate. Ketone peroxides contain the hydroperoxy (—OOH) group and thus are susceptible to the same ha2ards as hydroperoxides. 

The hydrohalide is liable to dehydrochlorination, particularly when moist acid is used in its preparation, so that hydrochloric acid acceptors such as lead carbonate are useful stabilisers. Dibutyl phthalate and tritolyl phosphate are effective plasticisers. Rubber hydrochloride is used as a packaging film (Pliofilm) and as a rubber-to-metal bonding agent (e.g. Typly). 

Metal Coating Alcohols, Cellosolve Acetate, Phthalates, Solvesso... 

Bhmingham Metal Company Ltd., 207 Bis(2-chloroisopropyl) ether, 25 Bis(chloromethyl) ether, 25 Bis(chloromethyl) ketone, 25 Bis(2-EthyUiexyl) phthalate, 25 Bismuth and Bismuth Compounds, 25 Bismuth Institute, 256 Bismuth telluride, 26 Bisphenol-A, 26 Bithionol, 26 Bitmac Ltd., 207, 236 Bitoscanate, 26 Bitoumina SA, 167... 

Heat stabiliser Organotin mercaptides/sulfides/carboxylates antimony mercaptides metal carboxylates lead stearate/phosphite/phthalate/sulfate S, Sb, Sn, Ba, Ca, Cd, Mg, Sr, Zn P, Pb, S... 

Data on additive production are mostly absent in LCI databases. Some data are available for metals production and for bisphenol-A, but even for widely used additives such as phthalates and brominated flame retardants, production data are not available. 

Selecting from scientific literature and reviews, Riskcycle researchers have defined a preliminary list of 16 additives of interest which will be analyzed and evaluated for a waste-related risk assessment chosen compounds include perfluorinated and brominated compounds, phthalates, phenols, and some heavy metals (Table 6). 

Known emissions from the production stage, which are not covered by characterisation factors and which may contribute significantly to the toxicity impact categories, include emissions of components occurring in small quantities in the raw materials (typically well below 5%) like siccatives (organic metal compounds), softeners (phthalates), antioxidants (aromatics) and wetteners (surfactants). Due to lack of readily available knowledge of their exact identity and/or lack of readily available data on their inherent environmental properties, it has not been possible to include them in the case study. 

A mixture with a solution of the peroxide in a dialkyl phthalate plasticiser decomposes exothermically but moderately, (probably catalysed by trace heavy metals in the carbon). 

The CL reaction of luminol (5-amino-2,3-dihydro-1,4-phthalazinedione) (1) is one of the more commonly used nonenzymatic CL reactions and has been extensively studied [49, 57-59], It is well known that the luminol CL reaction is catalyzed by many kinds of substances, e.g., ozone, halogen-Fe complex, hemin, hemoglobin, persulfate, and oxidized transition metals. The most acceptable scheme is shown in Figure 10. Luminol forms a six-membered ring of peroxide (3) from a diazaquinone intermediate (2) and then, by the decomposition of 3, N2 gas and the Si-excited state of the phthalate dianion are produced, yielding... 

Azomethine metal complex pigments replace the metal with tin stabilizers, resulting in a change in shade. In the case of manganese-laked pigments trouble can also be expected in the presence of epoxy compounds. Pigment preparations based on epoxidized soya bean oil are normally used instead of diisodecyl phthalate pastes in the automotive sector e.g. for coloring PVC roofs etc. 

In SL-PC, a catalyst is supported on a solid matrix in the form of the film of a nonvolatile liquid phase adsorbed on the solid. The catalytic film can be, for example, a molten salt or a molten oxide (e.g., Deacon s catalyst (CUCI2/KCI) used to oxidize HCl with oxygen for the chlorination of ethylene in the synthesis of vinyl chloride. Figure 6.1 V2O5 for the oxidation of sulphurous to sulphuric anhydride). Alternately, it can be a liquid phase (e.g., ethylene glycol, PPh3, butyl benzyl phthalate, etc.) that contains a soluble catalytic species such as a metal complex. 

As well as achieving a total phase out of PVC, H M have restricted the use of APEs, organotins, azo dyes, bisphenol A, BFRs, phthalates and a wide range of heavy metals, as well as chlorinated aromatic hydrocarbons. They stipulated a clear set of criteria to all their suppliers, used testing to ensure compliance and relied on their suppliers and chemical formulatorsto provide alternatives. 

The influence of temperature on the ortho effect has been evaluated in the alkaline hydrolysis in aqueous DMSO solutions of ortho-, meta- and para-substituted phenyl benzoates (26). The alcoholysis of phthalic anhydride (27) to monoalkyl phthalates (28) occurs through an A-2 mechanism via rate-determining attack of the alcohol on a carbonyl carbon of the anhydride (Scheme 4). Evidence adduced for this proposal included highly negative A 5 values and a p value of 4-2.1. In the same study, titanium tetra-n-butoxide and tri-n-butyltin ethanoxide were shown to act as effective catalysts of the half-ester formation from (27), the mechanism involving alkoxy ligand exchange at the metal as an initial step. ... 

The work function of the rubbing surfaces and the electron affinity of additives are interconnected on the molecular level. This mechanism has been discussed in terms of tribopolymerization models as a general approach to boundary lubrication (Kajdas 1994, 2001). To evaluate the validity of the anion-radical mechanism, two metal systems were investigated, a hard steel ball on a softer steel plate and a hard ball on an aluminum plate. Both metal plates emit electrons under friction, but aluminum produced more exoelectrons than steel. With aluminum, the addition of 1% styrene to the hexadecane lubricating fluid reduced the wear volume of the plate by over 65%. This effect considerably predominates that of steel on steel. Friction initiates polymerization of styrene, and this polymer formation was proven. It was also found that lauryl methacrylate, diallyl phthalate, and vinyl acetate reduced wear in an aluminum pin-on-disc test by 60-80% (Kajdas 1994). 

---