Antimony mercaptide

Commercial Stabilizers. The performance of the antimony stabilizers is significantly enhanced by adding polyhydroxybenzene compounds, eg, catechol, to the PVC (36). In commercial practice, about 5—10% catechol is formulated with the antimony mercaptide stabilizer products. The antimony mercaptides are normally prepared by heating antimony oxide with the appropriate mercaptan, normally isooctyl thioglycolate, under conditions to remove water. 

There has been a revival of interest in recent years in antimony mercaptides as alternatives to the organo-tin stabilisers. This stems from the low level of toxicity and the strong synergism with calcium stearate. However, compared to the... 

Heat stabiliser Organotin mercaptides/sulfides/carboxylates antimony mercaptides metal carboxylates lead stearate/phosphite/phthalate/sulfate S, Sb, Sn, Ba, Ca, Cd, Mg, Sr, Zn P, Pb, S... 

Qu, L., Tian, W., and Shu, W., Stabilization mechanism of antimony mercaptides in poly( vinyl chloride) ab initio theory studies, Polym. Degrad. Stabil, 76,185-189 (2002). 

Of less importance are antimony mercaptides, which find occasional use as low-cost replacements for organotins. The organotin and lead stabilizers are usually present as the only heat stabilizers in the resin formulation. However, the mixed metal stabilizers are used in combination with secondary heat stabilizers. The secondary heat stabilizers are usually organophosphites and epoxy compounds, but polyols and beta diketones are also used. The major types of primary heat stabilizers, along with their end uses are summarized in Table 4.13. 

The balance of internal versus external lubrication is particularly subject to change with changes in other ingredients in rigid PVC compounds. For example, the replacement of tin mercaptide stabilizer in pipe compounds with the same weight of antimony mercaptide shifts the overall balance towards internal lubrication. As a result, such substitution is generally accompanied by an increase in paraffin wax as external lubricant and a decrease in the level of calcium stearate used. 

Replacement of Labile Chlorines. When PVC is manufactured, competing reactions to the normal head-to-tail free-radical polymerization can sometimes take place. These side reactions are few ia number yet their presence ia the finished resin can be devastating. These abnormal stmctures have weakened carbon—chlorine bonds and are more susceptible to certain displacement reactions than are the normal PVC carbon—chlorine bonds. Carboxylate and mercaptide salts of certain metals, particularly organotin, zinc, cadmium, and antimony, attack these labile chlorine sites and replace them with a more thermally stable C—O or C—S bound ligand. These electrophilic metal centers can readily coordinate with the electronegative polarized chlorine atoms found at sites similar to stmctures (3—6). 

A number of compounds of the types RSbY2 and R2SbY, where Y is an anionic group other than halogen, have been prepared by the reaction of dihalo- or halostibines with lithium, sodium, or ammonium alkoxides (118,119), amides (120), azides (121), carboxylates (122), dithiocarbamates (123), mercaptides (124,125), or phenoxides (118). Dihalo- and halostibines can also be converted to compounds in which an antimony is linked to a main group (126) or transition metal (127). 

Most mercaptides are not available as commercial products, since large-scale applications of these chemical compounds are quite limited (only mercaptides of tin and antimony are used industrially as thermal stabilizers for poly(vinyl chloride) [de Sousa et al., 2000 Qu L. et al., 2002]). However, these compounds can be synthesized in a very simple way. Owing to their low water solubility, mercaptides can precipitate by reacting thiols (or thiophenols) with aqueous solutions of the corresponding metal salts. In addition to the well-known mercaptides of mercury, lead, zinc, and copper, many others, such as mercaptides of silver, gold, platinum, palladium, iridium, nickel, iron, cobalt, antimony, bismuth, and cadmium, have been prepared. 

As has been indicated in a number of studies, sulfur-containing compounds give a synergic effect with amines and phenols in the stabilization of high-molecular compounds [89, 279]. The following have been proposed and are used as stabilizers of polyvinyl chloride mercaptides of antimony [280, 281], condensation products of aldehydes or ketones with mercaptans [63], thioesters [282], salts of thioacids [283], aromatic esters of aliphatic sulfonic acids [284], esters of xanthic acids [285] the use of the polysulfide of the composition... 

Gaylord et al. [231] described the bulk or suspension polymerization of ethylenically unsaturated monomers, particularly vinyl chloride, using a catalyst system consisting of a monomer-soluble peroxyester or diacyl peroxide and a reducing agent which is a stannous or antimony(III) mercaptide. 

The rate of decomposition of a peroxygen compound such as t-butyl peroxyoctoate in the presence of a stannous or antimony(III) mercaptide is... 

---