Pharmaceutical analysis sample types

IEC continues to have numerous applications to the detection and quantification of various inorganic ions.1 1 This is particularly true in water analysis.5-14 Inorganic ions in a variety of other sample types, such as food and beverages,1518 rocks,19-23 biological fluids, (blood, urine, etc.),24-31 pharmaceutical substances,32 33 concentrated acids,34 alcohols,35 and cleanroom air36 have also been analyzed by IEC. IEC has also been employed in isotopic separation of ions,37 including the production of radioisotopes for therapeutic purposes.3839 Typical IEC sample matrices are complex, and may contain substances that interfere with measurement of the ion(s) of interest. The low detection limits required for many IEC separations demand simple extraction procedures and small volumes to avoid over-dilution. Careful choice and manipulation of the eluent(s) may be needed to achieve the desired specificity, especially when multiple ions are to be determined in a single sample. 

Major applications of modern TLC comprise various sample types biomedical, pharmaceutical, forensic, clinical, biological, environmental and industrial (product uniformity, impurity determination, surfactants, synthetic dyes) the technique is also frequently used in food science (some 10% of published papers) [446], Although polymer/additive analysis takes up a small share, it is apparent from deformulation schemes presented in Chapter 2 that (HP)TLC plays an appreciable role in industrial problem solving even though this is not reflected in a flood of scientific papers. TLC is not only useful for polymer additive extracts but in particular for direct separations based on dissolutions. 

IR is one of three forms of vibrational spectroscopy that is in conunon use for process analytical measurements the other two being near-lR (NIR) and Raman. Each one of these techniques has its pros and cons and the ultimate selection is based on a number of factors ranging from sample type, information required, cost and ease of implementation. The sample matrix is often a key deciding factor. NIR has been the method of choice for many years within the pharmaceutical industry, and sample handling has been the issue, especially where solid products are involved. IR is not particularly easy to implement for the continuous monitoring of solid substrates. However, often there is no one correct answer, but often when the full application is taken into account the selection becomes more obvious. In some cases very obvious, such as the selection of IR for trace gas analysis - neither NIR nor Raman is appropriate for such applications. 

Liquid chromatography/mass spectrometry (LC/MS)-based techniques provide unique capabilities for pharmaceutical analysis. LC/MS methods are applicable to a wide range of compounds of pharmaceutical interest, and they feature powerful analytical figures of merit (sensitivity, selectivity, speed of analysis, and cost-effectiveness). These analytical features have continually improved, resulting in easier-to-use and more reliable instruments. These developments coincided with the pharmaceutical industry s focus on describing the collective properties of novel compounds in a rapid, precise, and quantitative way. As a result, the predominant pharmaceutical sample type shifted from nontrace/pure samples to trace mixtures (i.e., protein digests, natural products, automated synthesis, bile, plasma, urine). The results of these developments have been sig-... 

Figure 1.1 Structure analysis matrix that illustrates pharmaceutical analysis preferences for four specific sample types nontrace/pure nontrace/ mixture trace/pure and trace/mixture. (Courtesy of Milestone Development Services, Newtown, Pa., USA.)...

Like gas chromatography (GC), HPLC employs a chromatographic column for the separation. It differs from GC in that the sample components need not be volatile and stable at elevated temperatures, they must only be soluble in a suitable single-component or mixed solvent. Various modes of HPLC can be applied to the analysis of a large variety of sample types containing non-polar, moderately or strongly polar and ionic compounds, either simple species or high-molecular mass synthetic polymers or biopolymers. These features of HPLC are especially useful in pharmaceutical and clinical analysis. 

A variety of MS formats are widely accepted and applied in the pharmaceutical industry. The specific MS application is often defined by the sample introduction technique. The pharmaceutical applications highlighted in this article feature two types of sample introduction techniques dynamic and static. Dynamic sample introduction involves the use of high-performance liquid chromatography (HPLC) on-line with MS. The resulting liquid chromatography/mass spectrometry (LC/MS) format provides unique and enabling capabilities for pharmaceutical analysis. The electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) modes are the most widely used. Static sample introduction techniques primarily use matrix-assisted laser desorption/ionization (MALDI). ... 

For pharmaceutical applications, the term bioanalysis refers to quantitative determination of a drug or its metabolites in a biological matrix. Although this term has traditionally been used to describe the analysis of in vivo samples (i.e., plasma or serum), current use of the term encompasses a broader range of applications that include the analysis of in vitro samples. Under this broader dehnihon, possible bioanalytical sample types can range anywhere from transport media to tissue homogenate. 

This chapter provides an overview of modern HPLC method development and discusses approaches for initial method development (column, detector, and mobile phase selection), method optimization to improve resolution, and emerging method development trends. The focus is on reversed-phase methods for quantitative analysis of small organic molecules since RPLC accounts for 60-80% of these applications. Several case studies on pharmaceutical impurity testing are presented to illustrate the method development process. For a detailed treatment of this subject and examples of other sample types, the reader is referred to the classic book on general HPLC method development by L. Snyder et al.1 and book chapters2,3 on pharmaceutical method development by H. Rasmussen et al. Other resources include computer-based training4 and training courses.5... 

Clearly, the potential applications for vibrational spectroscopy techniques in the pharmaceutical sciences are broad, particularly with the advent of Fourier transform instrumentation at competitive prices. Numerous sampling accessories are currently available for IR and Raman spectroscopy, enabling the analysis of virtually any type of pharmaceutically based sample. In addition, new sampling devices are rapidly being developed for at-line and on-line applications. 

The automation of preliminary operations in the analytical process Is rendered particularly difficult by (a) the large variety of existing samples, available in all three states of aggregation (solid, liquid and gas) and In different particle sizes, (b) the diversity of circumstances (sampling location and distance to the laboratory, need for preservation) and (c) the pretreatment required (dissolution, preconcentration, interference removal, etc.). All this makes the first stage of the analytical process one that cannot be automated In every case In fact, endeavours In this field are often aimed at a particular type of sample or application (e.g. clinical, food, agricultural or pharmaceutical analysis). 

Perhaps the most common type of problem encountered in the analytical lab is a quantitative analysis. Examples of typical quantitative analyses include the elemental analysis of a newly synthesized compound, measuring the concentration of glucose in blood, or determining the difference between the bulk and surface concentrations of Cr in steel. Much of the analytical work in clinical, pharmaceutical, environmental, and industrial labs involves developing new methods for determining the concentration of targeted species in complex samples. Most of the examples in this text come from the area of quantitative analysis. 

The greatest area of applications of this type of ECL has been in the analysis of pharmaceutical compounds with amine functionality. The reader is directed toward the previously mentioned review articles and Table 1 for further details [12, 14-16], Many methods have also been successfully applied to real samples in the form of body fluids or pharmaceutical preparations, although sample pretreatment such as deproteinization, centrifugation, and neutralization followed by a chromatographic step to remove interfering species is often required. Limits of detection are typically in the range 10-9—10 12 M. Figure 4 shows examples of some classes of pharmaceutical compounds that have been determined by Ru(bpy)32+ ECL. 

Direct injection of plasma or supernatant after protein precipitation on a short column with a high liquid flow rate is a common method for reducing analysis time in the pharmaceutical industry. The direct injection of a sample matrix is also known as the dilute-and-shoot (DAS) approach.62 DAS can be applied to all types of matrices and approaches and is the simplest sample preparation method with matrix dependency. Direct injection can also be approached through the extraction of eluent from PPT, SPE, and LLE onto a normal phase analytical column. The procedure is called hydrophilic interaction liquid chromatography (HILIC)70110111 and it avoids the evaporation and reconstitution steps that may cause loss of samples from heat degradation and absorption. 

Most workers in the pharmaceutical field identify thermal analysis with the melting point, DTA, DSC, and TG methods just described. Growing in interest are other techniques available for the characterization of solid materials, each of which can be particularly useful to deduce certain types of information. Although it is beyond the scope of this chapter to delve into each type of methodology in great detail, it is worth providing short summaries of these. As in all thermal analysis techniques, the observed parameter of interest is obtained as a function of temperature, while the sample is heated at an accurately controlled rate. 

---