Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Perchloric acid anhydride

Dichlorine h ptoxide, CljO, is the most stable of the chlorine oxides. It is a yellow oil at room temperature, b.p. 353 K, which will explode on heating or when subjected to shock. It is the anhydride of chloric(VlI) acid (perchloric acid) from which it is prepared by dehydration using phosphorus(V) oxide, the acid being slowly reformed when water is added. [Pg.336]

Thiele acetylation. Quinones, when treated with acetic anhydride in the presence of perchloric acid or of concentrated sulphuric acid, undergo simultaneous r uctive acetylation and substitution to yield triacetoxy derivatives, e.g., benzoquinone gives 1 2 4-triacetoxybenzene. [Pg.749]

Add 0-1 ml. of concentrated sulphuric acid or of 72 per cent, perchloric acid cautiously to a cold solution of 0 01 mol (or 1 0 g.) of the quinone in 3-5 ml. of acetic anhydride. Do not permit the temperature to rise above 50°. AUow to stand for 15-30 minutes and pour into 15 ml, of water. Collect the precipitated sohd and recrystaUise it from alcohol. [Pg.749]

Under these first-order conditions the rates of nitration of a number of compounds with acetyl nitrate in acetic anhydride have been determined. The data show that the rates of nitration of compounds bearing activating substituents reach a limit by analogy with the similar phenomenon shown in nitration in aqueous sulphuric and perchloric acids ( 2.5) and in solutions of nitric acid in sulpholan and nitro-methane ( 3.3), this limit has been taken to be the rate of encounter of the nitrating entity with the aromatic molecule. [Pg.86]

Hydrogen chloride Acetic anhydride, aluminum, 2-aminoethanol, ammonia, chlorosulfonic acid, ethylenediamine, fluorine, metal acetylides and carbides, oleum, perchloric acid, potassium permanganate, sodium, sulfuric acid... [Pg.1208]

Perchloric acid Acetic acid, acetic anhydride, alcohols, antimony compounds, azo pigments, bismuth and its alloys, methanol, carbonaceous materials, carbon tetrachloride, cellulose, dehydrating agents, diethyl ether, glycols and glycolethers, HCl, HI, hypophosphites, ketones, nitric acid, pyridine, steel, sulfoxides, sulfuric acid... [Pg.1211]

Most cellulose acetate is manufactured by a solution process, ie, the cellulose acetate dissolves as it is produced. The cellulose is acetylated with acetic anhydride acetic acid is the solvent and sulfuric acid the catalyst. The latter can be present at 10—15 wt % based on cellulose (high catalyst process) or at ca 7 wt % (low catalyst process). In the second most common process, the solvent process, methylene chloride replaces the acetic acid as solvent, and perchloric acid is frequentiy the catalyst. There is also a seldom used heterogeneous process that employs an organic solvent as the medium, and the cellulose acetate produced never dissolves. More detailed information on these processes can be found in Reference 28. [Pg.294]

Chlorine Heptoxide. The anhydride of perchloric acid is chlorine heptoxide [10294 8-1/, also known as dichlorine heptoxide. It is... [Pg.65]

Other mixed esters, eg, cellulose acetate valerate [55962-79-3] cellulose propionate valerate [67351-41-17, and cellulose butyrate valerate [53568-56-2] have been prepared by the conventional anhydride sulfuric acid methods (25). Cellulose acetate isobutyrate [67351-38-6] (44) and cellulose propionate isobutyrate [67351-40-0] (45) have been prepared with a 2inc chloride catalyst. Large amounts of catalyst and anhydride are required to provide a soluble product, and special methods of delayed anhydride addition are necessary to produce mixed esters containing the acetate moiety. Mixtures of sulfuric acid and perchloric acid are claimed to be effective catalysts for the preparation of cellulose acetate propionate in dichi oromethane solution at relatively low temperatures (46) however, such acid mixtures are considered too corrosive for large-scale productions. [Pg.252]

In the fibrous acetylation process, part or all of the acetic acid solvent is replaced with an inert dilutent, such as toluene, benzene, or hexane, to maintain the fibrous stmcture of cellulose throughout the reaction. Perchloric acid is often the catalyst of choice because of its high activity and because it does not react with cellulose to form acid esters. Fibrous acetylation also occurs upon treatment with acetic anhydride vapors after impregnation with a suitable catalyst such as zinc chloride (67). [Pg.253]

However, this method is appHed only when esterification cannot be effected by the usual acid—alcohol reaction because of the higher cost of the anhydrides. The production of cellulose acetate (see Fibers, cellulose esters), phenyl acetate (used in acetaminophen production), and aspirin (acetylsahcyhc acid) (see Salicylic acid) are examples of the large-scale use of acetic anhydride. The speed of acylation is greatiy increased by the use of catalysts (68) such as sulfuric acid, perchloric acid, trifluoroacetic acid, phosphoms pentoxide, 2inc chloride, ferric chloride, sodium acetate, and tertiary amines, eg, 4-dimethylaminopyridine. [Pg.380]

The selectivity is probably impaired by bromination at C-2 and C-9. Bromination under buffered conditions of the A -enol acetate prepared from acetic anhydride with perchloric acid catalysis may give better results. See also ref. 55 for a similar bromination. [Pg.290]

The dimethyl acetal (94) is readily prepared from the 22-aldehyde (93) by direct reaction with methanol in the presence of hydrogen chloride. Ena-mines (95) are formed without a catalyst even with the poorly reactive piperidine and morpholine.Enol acetates (96) are prepared by refluxing with acetic anhydride-sodium acetate or by exchange with isopropenyl acetate in pyridine.Reaction with acetic anhydride catalyzed by boron trifluoride-etherate or perchloric acid gives the aldehyde diacetate. [Pg.401]

A 20) oiefin Formation via Enol Acetates and Ozonolysis A stock solution of acetylating mixture is prepared by dissolving 0.2 ml of 70-72% perchloric acid in 5 ml of acetic anhydride. To a solution of 5 g of 3a,6a-diacetoxy-5jff-pregnan-20-one in 50 ml of carbon tetrachloride is added 5 ml of the above stock perchloric acid-acetic anhydride solution and the mixture is allowed to stand at room temperature for 1.25 hr. The mixture is... [Pg.159]

In a situation where severe steric hindrance e.g., 16,16-dimethyl-20-keto-pregnanes) prevents enol acetate formation, an alternate scheme has been devised. Condensation of ethyl oxalate at C-21 produces, after hydrolysis, the 21-glyoxylic acid this on treatment with acetic anhydride and a strong acid catalyst such as perchloric acid gives both lactone acetates. [Pg.187]

Ketoamides can participate in a variation of the Paal-Knorr condensation to yield 5-alkyl-2-aminofurans. Boyd described the cyclization of 1,4-ketoamides 91 upon exposure to acetic anhydride and perchloric acid to yield imminium salts 92 that furnished aminofurans 93 after treatment with triethylamine. ... [Pg.179]

Recently it allowed the preparation of bispyrylium salts (where the two pyrylium nuclei with aryl groups in positions 2 and 6 are linked in position 4 by p-phenylene, w-phenylenej or 2,5-thienylene group ) by dehydrogenation with perchloric acid in acetic anhydride or with triphenylmethyl perchlorate in acetic acid. Directly linked dications were obtained similarly (cf. Section II,B,2,a ). [Pg.283]

An interesting application of this reaction was the use of macro-molecular anhydrides, namely, styrene-maleic anhydride or vinyl acetate-maleic anhydride copolymers in the presence of perchloric acid as catalyst, these copolymers acylate mesityl oxide or d rpnone to macromolecular pyrylium salts which, with aryl substituents, are fluorescent.No crystalline products could be obtained from succinic anhydride because of the solubility and ease of decarboxylation. [Pg.285]

Besides acetophenone, this reaction was also applied to p-chloro- andp-methoxyacetophenone, and even to an aliphatic ketone, acetone (although the yield was stated to be only half as large as that obtained from mesityl oxide, i.e., less than 30%, Dorofeenko and co-workers reported a 45% yield of 2,4,6-trimethylpyrylium perchlorate from acetone, acetic anhydride, and perchloric acid), and is the standard method for preparing pyrylium salts with identical substituents in positions 2 and 4. The acylating agent may be an anhydride in the presence of anhydrous or hydrated ferric chloride, or of boron fluoride, or the acid chloride with ferric chloride.Schneider and co-workers ... [Pg.309]

II, C,Praill and Whitear obtained a crystalline perchlorate from acetic anhydride and perchloric acid on standing it proved to possess structure 218 and to undergo isomerization to 219 under the influence of water. The same products can be obtained on acetylating dehydroaeetic acid. [Pg.325]

The excess of N-chlorosuccinimide is destroyed by the addition of about 15 drops of allyl alcohol and 180 ml of water is then added with stirring. This mixture is held at 0°C for about one hour. The precipitated 16/3-methyl-1,4-pregnadiene-9o-chloro-11/3,17o,21-triol-3,20-dione-21-acetate is recovered by filtration. A solution of 250 mg of the chlorohydrin in 5 ml of 0.25N perchloric acid in methanol is stirred for about 18 hours at room temperature to produce 16/3-methyl-9o-chloro-11/3,17o,21-trihydroxy-1,4-pregnadiene-3,20-dione which is recovered by adding water to the reaction mixture and allowing the product to crystallize. Propionic anhydride is then used to convert this material to the dipropionate. [Pg.132]

Discussion. Hydroxyl groups present in carbohydrates can be readily acetylated by acetic (ethanoic) anhydride in ethyl acetate containing some perchloric acid. This reaction can be used as a basis for determining the number of hydroxyl groups in the carbohydrate molecule by carrying out the reaction with excess acetic anhydride followed by titration of the excess using sodium hydroxide in methyl cellosolve. [Pg.306]

Solutions required. Acetic anhydride. Prepare 250 mL of a 2.0M solution in ethyl acetate containing 4.0 g of 72 per cent perchloric acid. The solution is made by adding 4.0 g (2.35 mL) of 72 per cent perchloric acid to 150 mL of ethyl acetate in a 250 mL graduated flask. Pipette 8.0 mL of acetic anhydride... [Pg.306]

Sequential treatment of oxamoyl chloride 495 with imidrazones and then with perchloric acid and acetic anhydride gave 496 (86S635) (Scheme 103). [Pg.99]

The sequential treatment of triazine derivative 990 with acyl chlorides and acetic anhydride and perchloric acid afforded (86H1031) thiadi-azolo[l, 2,4]triazinium perchlorates 991. On the other hand, cyclocondensation of 992 with organic acids gave 993 [82JHC1577 83JAP(K)58/180492] and 994 with aromatic aldehydes (84JIC552) (Scheme 183). [Pg.147]

Properties of Perchloric Acid—Acetic Anhydride—Acetic Acid Mixtures. P 144... [Pg.15]


See other pages where Perchloric acid anhydride is mentioned: [Pg.204]    [Pg.239]    [Pg.79]    [Pg.364]    [Pg.378]    [Pg.464]    [Pg.21]    [Pg.629]    [Pg.271]    [Pg.850]    [Pg.282]    [Pg.285]    [Pg.286]    [Pg.297]    [Pg.310]    [Pg.310]    [Pg.134]    [Pg.97]    [Pg.463]    [Pg.671]    [Pg.1564]    [Pg.307]    [Pg.56]    [Pg.284]   
See also in sourсe #XX -- [ Pg.281 , Pg.282 ]




SEARCH



Acids perchloric acid

Perchloric acid

© 2024 chempedia.info