Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Palladium oxidative carbonylation

Benzoic acid and naphthoic acid are formed by the oxidative carbonylation by use of Pd(OAc)2 in AcOH. t-Bu02H and allyl chloride are used as reoxidants. Addition of phenanthroline gives a favorable effect[360], Furan and thiophene are also carbonylated selectively at the 2-position[361,362]. fndole-3-carboxylic acid is prepared by the carboxylation of 1-acetylindole using Pd(OAc)2 and peroxodisulfate (Na2S208)[362aj. Benzoic acid derivatives are obtained by the reaction of benzene derivatives with sodium palladium mal-onate in refluxing AcOH[363]. [Pg.78]

Oxidative Carbonylation of Ethylene—Elimination of Alcohol from p-Alkoxypropionates. Spectacular progress in the 1970s led to the rapid development of organotransition-metal chemistry, particularly to catalyze olefin reactions (93,94). A number of patents have been issued (28,95—97) for the oxidative carbonylation of ethylene to provide acryUc acid and esters. The procedure is based on the palladium catalyzed carbonylation of ethylene in the Hquid phase at temperatures of 50—200°C. Esters are formed when alcohols are included. Anhydrous conditions are desirable to minimize the formation of by-products including acetaldehyde and carbon dioxide (see Acetaldehyde). [Pg.156]

The oxidative carbonylation of styrene with carbon monoxide, oxygen, and an aUphatic alcohol in the presence of a palladium salt, a copper salt, and sodium propionate also provides the requisite cinnamate. [Pg.174]

Following this pnblication, the anthors tested a series of Pd-NHC complexes (33-36) for the oxidative carbonylation of amino compounds (Scheme 9.8) [44,45]. These complexes catalysed the oxidative carbonylation of amino compounds selectively to the nreas with good conversion and very high TOFs. Unlike the Cu-NHC catalyst 38-X, the palladium complexes catalysed the oxidative carbonylation of a variety of aromatic amines. For example, 35 converted d-Me-C H -NH, d-Cl-C H -NH, 2,4-Me3-C H3-NH3, 2,6-Me3-C H3-NH3, and 4-Ac-C H3-NH3 to the corresponding nreas with very high TOFs (>6000) in 1 h at 150°C, in 99%, 87%, 85%, 72%, and 60% isolated yields, respectively (Pco,o2 = 3.2/0.8 MPa). [Pg.228]

Later, a nickel-catalyzed cascade conversion of propargyl halides and propargyl alcohol into a pyrone in water was reported. The reaction involved a carbonylation by CO and a cyanation by KCN (Eq. 4.55).96 Recently, Gabriele et al. explored a facile synthesis of maleic acids by palladium catalyzed-oxidative carbonylation of terminal alkynes in aqueous DME (1,2-dimethoxyethane) (Eq. 4.56).97... [Pg.127]

Didgikar MR, Roy D, Gupta SP, Joshi SS, Chaudhari RV (2010) Immobilized palladium nanoparticles catalyzed oxidative carbonylation of amines. Ind Eng Chem Res 49 1027-1032... [Pg.330]

Hydroxycarbonylation and alkoxycarbonylation of alkenes catalyzed by metal catalyst have been studied for the synthesis of acids, esters, and related derivatives. Palladium systems in particular have been popular and their use in hydroxycarbonylation and alkoxycarbonylation reactions has been reviewed.625,626 The catalysts were mainly designed for the carbonylation of alkenes in the presence of alcohols in order to prepare carboxylic esters, but they also work well for synthesizing carboxylic acids or anhydrides.137 627 They have also been used as catalysts in many other carbonyl-based processes that are of interest to industry. The hydroxycarbonylation of butadiene, the dicarboxylation of alkenes, the carbonylation of alkenes, the carbonylation of benzyl- and aryl-halide compounds, and oxidative carbonylations have been reviewed.6 8 The Pd-catalyzed hydroxycarbonylation of alkenes has attracted considerable interest in recent years as a way of obtaining carboxylic acids. In general, in acidic media, palladium salts in the presence of mono- or bidentate phosphines afford a mixture of linear and branched acids (see Scheme 9). [Pg.188]

The addition of a carbonylation step extended a pyrrole synthesis to pyrrole-2-acetic acid derivatives <06ASC2212>. Treatment of enyne amine 1 with palladium diiodide in the presence of CO and methanol produced pyrrole-2-acetic ester 2 via a 5-exo-dig cyclization, oxidative carbonylation, and isomerization. [Pg.135]

Hydroboration and oxidation of 160 yields an alcohol that is subsequently oxidized with PDC to give ketone compound 161. Enolization and triflation converts this compound to enol triflate 162, which can be further converted to x,/i-unsaturated ester 163 upon palladium-mediated carbonylation methox-ylation. The desired alcohol 164 can then be readily prepared from 163 via DIBAL reduction. Scheme 7 50 shows these conversions. [Pg.429]

Palladium catalysts, 10 42 14 49 16 250 Palladium-catalyzed carbonylation, 13 656 Palladium chloride/copper chloride, supported catalyst, 5 329 Palladium compounds, 19 650-654 synthesis of, 19 652 uses for, 19 653-654 Palladium films, 19 654 Palladium membranes, 15 813 Palladium monoxide, 19 651 Palladium oxide, 19 601... [Pg.669]

In an alternative strategy functionalized phenols, such as iodophenol, were involved in palladium-catalyzed carbonylation of alkynes or allenes, producing coumarin or chromone derivatives (Scheme 23) [130-133]. After oxidative addition of the iodoarene to the Pd(0) catalyst the order of insertion of either CO or the unsaturated substrate mainly depends on the nature of the substrate. In fact, Alper et al. reported that CO insertion occurs prior to allene insertion leading to methylene- or vinyl-benzopyranone derivatives [130]. On the contrary, insertion of alkynes precedes insertion of CO, affording couma-rine derivatives, as reported by Larock et al. According to the authors, this unusual selectivity can be explained by the inability of the acyl palladium species to further react with the alkyne, hence the decarbonylation step occurs preferentially [131-133]. [Pg.124]

Oxidative carbonylations have acquired a growing importance during the last few years, owing to the development of new and selective catalytic systems, mainly based on palladium, which are able to promote ordered sequences of transformations under mild conditions with formation of highly functionalized carbonyl compounds in one step starting from very simple building blocks. [Pg.244]

The oxidative carbonylation of alcohols and phenols to carbonates can be catalyzed by palladium or copper species [154-213]. This reaction is of particular practical importance, since it can be developed into an industrial process for the phosgene-free synthesis of dimethyl carbonate (DMC) and diphenyl carbonate (DPC), which are important industrial intermediates for the production of polycarbonates. Moreover, DMC can be used as an eco-friendly methylation and carbonylation agent [214,215]. The industrial production of DMC by oxidative carbonylation of methanol has been achieved by Enichem [216] and Ube [217]. [Pg.259]

On the other hand, when the oxidative carbonylation of a ,a -disubstituted propynylamines was carried out in the presence of an excess of CO2, the intermediate carbamate species could undergo cyclization with incorporation of CO2 into the five-membered cycle, either by direct nucleophilic attack of the carbamate oxygen to the triple bond coordinated to Pd(II) (Scheme 33, path a) or through the intermediate formation of a palladium carbamate complex followed by triple bond insertion (Scheme 33, path b). Carbon monoxide insertion into the Pd - C bond of the resulting stereoisomeric vinylpalladium intermediates then led to the final oxazolidi-none derivatives. [Pg.263]

The mechanism of palladium-catalyzed carbonylation of organic halides is generally assumed to involve oxidative additon of R-X to a Pd(0) species which is formed from the precursors on the action of CO + OH . Migratory insertion of R onto a coordinated CO followed by reaction with a nucleophile generates the product and gives back the catalytically active palladium(O) species (Scheme 5.4 A). [Pg.150]

After ARCO patents issued, Stille and coworkers published on butadiene oxycarbonylation(14-16). Palladium was utilized as the oxidative carbonylation catalyst and copper(II) chloride was employed as a stoichiometric reoxidation agent for palladium. Although the desired hex-3 -enedioate is the exclusive product, commercial technology which uses stoichiometric copper is not practical. Once the copper(Il) is consumed, the monoatomic palladium spent catalyst agglomerates affording polymeric palladium which is not easily reoxidized to an active form. [Pg.79]

The adipic acid process we have developed involves butadiene oxidative carbonylation in the presence of methanol, a l, l-dimethoxycyclohexane dehydration agent, and a palladium(ll)/ copper(ll) redox catalyst system (Equation 1.). The reaction sequence includes an oxycarbonylation, hydrogenation and hydrolysis step(17-19). The net result is utilization of butadiene, the elements of synthesis gas, l, -dimethoxycyclohexane and air to give adipic acid, cyclohexanone and methanol. [Pg.79]

An oxidative environment is also an essential element in maintaining catalytic activity. Air is used as the copper(l) reoxidant for safety reasons. Oxygen partial pressure must be held between 2 volume % and 6 volume % during the redox cycle. If the oxygen partial pressure falls below 2 volume %, monoatomic palladium(O) does not reoxidize to palladium(Il) at a sufficient rate, and some catalytic activity is lost due to polymeric palladium metal formation. Under typical oxycarbonylation conditions, copper(ll) cannot reoxidize polymeric palladium metal. An oxygen partial pressure greater than 6 volume % affords a potentially explosive gas mixture with carbon monoxide. Oxygen partial pressure control within these limits was easily achieved in the oxidative-carbonylation pilot plant reactor. [Pg.84]

A commercially attractive palladium catalyzed oxidative carbonylation route to adipic and sebacic acid has been developed which uses butadiene and the elements of synthesis gas as the raw... [Pg.93]

Trifluoroalanine has also been prepared by reducing trifluoropyruvate imines (ethyl trifluoropyruvate is available commercially it is prepared either from per-fluoropropene oxide or by trifluoromethylation of ethyl or f-butyl oxalate). These imines are obtained by dehydration of the corresponding aminals or by Staudinger reaction. They can also be obtained by palladium-catalyzed carbonylation of trifluoroacetamidoyl iodide, an easily accessible compound (cf. Chapter 3) (Figure 5.4). Reduction of the imines affords protected trifluoroalanines. When the imine is derived from a-phenyl ethyl amine, an intramolecular hydride transfer affords the regioisomer imine, which can further be hydrolyzed into trifluoroalanine. ... [Pg.149]

The oxidative carbonylation of arenes to aromatic acids is a useful reaction which can be performed in the presence of Wacker-type palladium catalysts (equation 176). The stoichiometric reaction of Pd(OAc)2 with various aromatic compounds such as benzene, toluene or anisole at 100 °C in the presence of CO gives aromatic acids in low to fair yields.446 This reaction is thought to proceed via CO insertion between a palladium-carbon (arene) allyl chloride, but substantial amounts of phenol and coupling by-products are formed.447... [Pg.369]


See other pages where Palladium oxidative carbonylation is mentioned: [Pg.183]    [Pg.156]    [Pg.645]    [Pg.79]    [Pg.81]    [Pg.86]    [Pg.127]    [Pg.192]    [Pg.204]    [Pg.212]    [Pg.795]    [Pg.297]    [Pg.24]    [Pg.77]    [Pg.156]    [Pg.156]    [Pg.183]    [Pg.330]    [Pg.368]   
See also in sourсe #XX -- [ Pg.118 , Pg.119 , Pg.120 ]




SEARCH



Carbonyl oxidation

Carbonyl oxide

Carbonylation oxide

Oxidation carbonylative

Oxidation oxidative carbonylation

Oxidation palladium

Oxidative carbonylation

Oxidative carbonylations

Palladium carbonylation

Palladium carbonylations

Palladium carbonyls

Palladium oxide

Palladium oxidized

© 2024 chempedia.info