Insertion triple bonds

The benzene derivative 409 is synthesized by the Pd-catalyzed reaction of the haloenyne 407 with alkynes. The intramolecular insertion of the internal alkyne, followed by the intermolecular coupling of the terminal alkyne using Pd(OAc)2, Ph3P, and Cul, affords the dienyne system 408, which cyclizes to the aromatic ring 409[281]. A similar cyclization of 410 with the terminal alkyne 411 to form benzene derivatives 412 and 413 without using Cul is explained by the successive intermolecular and intramolecuar insertions of the two triple bonds and the double bond[282]. The angularly bisannulated benzene derivative 415 is formed in one step by a totally intramolecular version of polycycli-zation of bromoenediyne 414[283,284],... 

The cyclization of the enediynes 110 in AcOH gives the cyclohexadiene derivative 114. The reaction starts by the insertion of the triple bond into Pd—H to give 111, followed by tandem insertion of the triple bond and two double bonds to yield the triene system 113, which is cyclized to give the cyclohexadiene system 114. Another possibility is the direct formation of 114 from 112 by endo-rype. insertion of an exo-methylene double bond[53]. The appropriately structured triyne 115 undergoes Pd-catalyzed cyclization to form an aromatic ring 116 in boiling MeCN, by repeating the intramolecular insertion three times. In this cyclization too, addition of AcOH (5 mol%) is essential to start the reaction[54]. 

The intramolecular carbopalladation (or insertion) of the triple bond in dimethyl 4-pentynylmalonate (215) with Pd—H species and malonate anion as shown by 216 proceeds in the presence of f-BuOK and 18-crown ether, affording the methylenecyclopentane derivatives 217 and 218, the amounts of which depend on the reaction conditions. The Pd—H species may be formed... 

The first step of the reaction is the oxypalladation of the triple bond with PdCl2 as shown by 228 to form the alkenylpalladium species 229, and the Pd is displaced with proton to regenerate Pd(TI) species and the lactone 224. The alkenylpalladium species 229 can be utilized for further reaction. When allyl chloride (230) is added, double bond insertion is followed by elimination of... 

The reaction of allyl halides with terminal alkynes by use of PdClifFhCNji as a catalyst affords the l-halo-l,4-pentadienes 297. 7r-AlIylpalladium is not an intermediate in this reaction. The reaction proceeds by chloropalladation of the triple bond by PdCh, followed by the insertion of the double bond of the allyl halide to generate 296. The last step is the regeneration by elimination of PdCh, which recycles[148]. The cis addition of allyl chloride to alkynes is supported by formation of the cyclopentenone 299 from the addition product 298 by Ni(CO)4-catalyzed carbonylation[149]. 

Butyrolactones are prepared by intramolecular reaction of haloallylic 2-alkynoates. The a-chloromethylenebutyrolactone 301 is prepared by the intramolecular reaction of300[150,151]. 4 -Hydroxy-2 -alkenyl 2-alkynoates can be used instead of haloallylic 2-alkynoates, and in this reaction, Pd(II) is regenerated by elimination of the hydroxy group[152]. As a related reaction, the q-(chloromethylene)-7-butyrolactone 304 is obtained from the cinnamyl 2-alkynoate 302 in the presence of LiCl and CuCbflSS]. Isohinokinin (305) has been synthesized by this reaction[l 54]. The reaction is explained by chloro-palladation of the triple bond, followed by intramolecular alkene insertion to generate the alkylpalladium chloride 303. Then PdCb is regenerated by attack of CuCb on the alkylpalladium bond as a key step in the catalytic reaction. 

Several stable Group 6 metal-ketene complexes are known [14], and photo-driven insertion of CO into a tungsten-carbyne-carbon triple bond has been demonstrated [15]. In addition, thermal decomposition of the nonheteroatom-stabilized carbene complexes (CO)5M=CPh2 (M=Cr, W) produces diphenylke-tene [16]. Thus, the intermediacy of transient metal-ketene complexes in the photodriven reactions of Group 6 Fischer carbenes seems at least possible. 

The reactions of a neutral 10 as well as a cationic dihydrido(acetato)osmium complex 12 with acetylenic compounds were examined (Scheme 6-17) [11-13]. A vinyU-dene 99, an osmacyclopropene 100, or a carbyne complex 101 were obtained, depending on the starting hydrido(acetato) complexes or the kind of acetylene used. In any case, the reaction proceeded by insertion of a C C triple bond into one of the two Os-H bonds, but the acetato ligands do not take part in the reaction and act as stabilizing ligands. 

The first one, (A), includes (b) insertion of CO into the Pd-S bond (c) insertion of the C C triple bond of the enyne into the Pd-C(0)SR bond whereby Pd binds to the terminal carbon and the RSC(O) group to the internal carbon, and (d) C-H bond-forming reductive elimination or protolysis by the thiol to form 29 (Scheme 7-7). 

The behavior of the Si—P 7r-bond toward a G=C triple bond was examined in the case of 15a by employing differently substituted alkynes.14 It appeared that 15a does not react with dialkyl, diaryl-, or disilyl-substi-tuted alkynes at 110°C even cyclooctyne, usually a very reactive alkyne, does not react. However, when 15a was stirred with phenylacetylene at 80°C in toluene, the C—H insertion product 24 was isolated as colorless crystals (Eq. 9).14 Its molecular structure has been elucidated by singlecrystal X-ray diffraction (Fig. 9). 

The formation of the complexes shown in Scheme 14 and Eq. (5) has been rationalized according to Scheme 15. Thus, it has been proposed that the insertion of the Os—H bond of OsHCl(CO)(P Pr3)2 into the carbon-carbon triple bond of the alkynol initially gives five-coordinate (E )-alkenyl intermediates, which subsequently isomerize into the Os CH=CHC(OH)R1R2 derivatives. The key to this isomerization is probably the fact that the five-coordinated ( )-alkenyl intermediates are 16-electron species, while the Os CH=CHC(OH)R1R2 derivatives are... 

In a manner similar to OsH(OH)(CO)(P Pr3)2, the hydride-metallothiol complex OsH(SH)(CO)(P Pr3)2 adds Lewis bases that are not bulky such as CO and P(OMe)3 to give the corresponding six-coordinate hydride-metallothiol derivatives OsH(SH)(CO)L(P Pr3)2 (L = CO, P(OMe)3). OsH(OH)(CO)(PiPr3)2 and OsH(SH)(CO)(P Pr3 also show a similar behavior toward dimethyl acetylenedi-carboxylate. Treatment of OsH(SH)(CO)(P Pr3)2 with this alkyne affords 6sH SC(C02Me)CHC(OMe)6 (CO)P Pr3)2, which is the result of the tram addition of the S—H bond to the carbon-carbon triple bond of the alkyne. Phenyl-acetylene, in contrast to dimethyl acetylenedicarboxylate, reacts with OsH(SH) (CO)(P Pr3)2 by insertion of the carbon-carbon triple bond into the Os—H bond to give the unsaturated alkenyl-metallothiol derivative Os ( )-CH=CHPh (SH) (CO)(P Pr3 )2, the inorganic counterpart of the organic a, (3-unsaturated mercaptans (Scheme 46).92... 

Tietze and coworkers [60] observed a combination of a Heck reaction and a C-H-activation by treatment of the alkyne 6/1-111 with Pd°. These authors aimed at compound 6/1-112, but 6/1-110 was obtained as a single product in high yield (Scheme 6/1.29). It can again be assumed that after oxidative addition a cis-carbopalladation of the triple bond takes place to give an alkenyl Pd intermediate which undergoes the C-H-insertion into the neighboring naphthalene and not into the aryl ether moiety. 

The last part of Table III catalogs examples of insertion reactions of double and triple bonds brought about by nickel complexes on other organomagnesium or aluminum species (examples 41-46). 

Insertion of palladium into the Si-Sn bond generates intermediate 428 that undergoes m-addition on the triple bond (Scheme 108). The resulting vinylpalladium 429 ensures the carbopalladation of the second triple bond followed by reductive elimination with retention of stereochemistry.376... 

Iridium hydride complexes effectively catalyze addition of nitriles or 1,3-dicarbonyl compounds (pronucleophiles) to the C=N triple bonds of nitriles to afford enamines.42S,42Sa Highly chemoselective activation of both the a-C-H bonds and the C=N triple bonds of nitriles has been observed (Equation (72)). To activate simple alkane dinitriles, IrHs(P1Pr3)2 has proved to be more effective (Equation (73)). The reaction likely proceeds through oxidative addition of the a-C-H bonds of pronucleophiles to iridium followed by selective insertion of the CN triple bonds to the Ir-C bond. 

The allylic 2-alkynoates 77 are a group of special enynes with an ester linkage between their double bond and triple bond. When halopalladation of the triple bond is followed by C-C double bond insertion and the cleavage of the carbon-palladium bond, a series of y-lactones (78-81) can be obtained. 

There are several examples of the concerted mechanism. However, no report of an insertion of a carbon—carbon triple bond into a metallacyclopentadiene had appeared prior to discovery of this reaction. At low temperatures, during the reaction of zirconacyclopentadienes with DMAD, the formation of trienes (79) is observed upon hydrolysis. This clearly indicates that the benzene formation involves the insertion (addition) reaction of DMAD. As shown in Eq. 2.50, the alkenyl copper moiety adds to the carbon—carbon triple bond of DMAD and elimination of Cu metal leads to the benzene derivatives 72. Indeed, a copper mirror is observed on the wall of the reaction vessel. 

Access to non-terminal ( ,2)-dienes and ( ,Z, )-trienes 61 is provided analogously through deprotonation of ( , )-4-alkyl-l-chloro-l,3-butadienes followed by insertion of the resultant carbenoid 60 into alkyl- and alkenyl-zirconocene chlorides (Scheme 3.14) [38], The corresponding internal (Z,Z)-dienes and (Z,Z, )-trienes are also readily obtained by insertion of (3-alkynyl carbenoids 62 [44] into alkyl- and alkenylzirconocene chlorides, respectively (Scheme 3.14). Reduction of the triple-bond moiety in the products 63 to afford the cis-alkenes is well known [45—47]. 

Allylzirconation of alkynes with allylzirconocene chloride reagents (obtained by hydrozir-conation of allenes) takes place in the presence of a catalytic amount of methylaluminox-ane (MAO) [67,68]. MAO presumably abstracts chloride to form an allylzirconocene cation, which coordinates to the alkyne triple bond. The subsequent migratory insertion is regioselective, as it is found that the new bond is mainly formed between the a-carbon of the allylzirconium species and the internal carbon of a terminal alkyne (Scheme 8.33). 

In recent years, several attempts have been made to prepare the first disilynes, compounds having Si-Si triple bonds,791 792 until Sekiguchi et al. in 2004 succeeded in the isolation and full characterization of the first member of this compound class.793 West et al. have studied the dehalogenation of 2,6-Mes2C6H3SiF3 761 with sodium, which has afforded the bis(silafluorene) derivative 762, whose formation may be rationalized in terms of two intramolecular insertion reactions of a bis(silylenoid) 763 into two C(.r/>z)-C(.r/>3) bonds (Scheme 99). 794... 

A different approach towards titanium-mediated allene synthesis was used by Hayashi et al. [55], who recently reported rhodium-catalyzed enantioselective 1,6-addition reactions of aryltitanate reagents to 3-alkynyl-2-cycloalkenones 180 (Scheme 2.57). In the presence of chlorotrimethylsilane and (R)-segphos as chiral ligand, alle-nic silyl enol ethers 181 were obtained with good to excellent enantioselectivities and these can be converted further into allenic enol esters or triflates. In contrast to the corresponding copper-mediated 1,6-addition reactions (Section 2.2.2), these transformations probably proceed via alkenylrhodium species (formed by insertion of the C-C triple bond into a rhodium-aryl bond) and subsequent isomerization towards the thermodynamically more stable oxa-jt-allylrhodium intermediates [55],... 

---