P-diketone

A ketone having an a-hydrogen atom may be acylated with an eater or an acid anhydride to form a p diketone ... 

A mixture of an acid anhydride and a ketone is saturated with boron trifluoride this is followed by treatment with aqueous sodium acetate. The quantity of boron trifluoride absorbed usually amounts to 100 mol per cent, (based on total mola of ketone and anhydride). Catalytic amounts of the reagent do not give satisfactory results. This is in line with the observation that the p diketone is produced in the reaction mixture as the boron difluoride complex, some of which have been isolated. A reasonable mechanism of the reaction postulates the conversion of the anhydride into a carbonium ion, such as (I) the ketone into an enol type of complex, such as (II) followed by condensation of (I) and (II) to yield the boron difluoride complex of the p diketone (III) ... 

The horon difluoride coordination complex is decomposed by heating under reflux with an aqueous solution of 2 mols of sodium acetate per mol of anhydride, whereupon the p diketone (acetylacetone) is liberated. 

The equilibrium of the overall reaction Is shifted in the direction of the condensation product by the precipitation of the p diketone as its sodium salt. 

The preparation of benzoylacctone Is another example of the acylation of a ketone (acetophenone) by ethyl acetate to a p diketone (Claisen condensation compare preceding Section) ... 

A 1 3 arrangement of two carbonyl groups (compounds called P diketones) leads to a situation m which the keto and enol forms are of comparable stability... 

A synthetically useful reaction known as the Michael reaction, or Michael addition, involves nucleophilic addition of carbanions to a p unsaturated ketones The most common types of carbanions used are enolate 10ns derived from p diketones These enolates are weak bases (Section 18 6) and react with a p unsaturated ketones by conjugate addition... 

In practice this reaction is difficult to carry out with simple aldehydes and ketones because aldol condensation competes with alkylation Furthermore it is not always possi ble to limit the reaction to the introduction of a single alkyl group The most successful alkylation procedures use p diketones as starting materials Because they are relatively acidic p diketones can be converted quantitatively to their enolate ions by weak bases and do not self condense Ideally the alkyl halide should be a methyl or primary alkyl halide... 

Enolization (Sections 18 4 through 18 6) Aldehydes and ke tones having at least one a hydro gen exist in equilibrium with their enol forms The rate at which equilibrium is achieved is in creased by acidic or basic cata lysts The enol content of simple aldehydes and ketones is quite small p diketones however are extensively enolized... 

Esters of nonenolizable monocarboxylic acids such as ethyl benzoate give p diketones on reaction with ketone enolates... 

Intramolecular acylation of ketones yields cyclic p diketones when the ring that is formed is five or six membered... 

Even though ketones have the potential to react with themselves by aldol addition recall that the position of equilibrium for such reactions lies to the side of the starting materials (Section 18 9) On the other hand acylation of ketone enolates gives products (p keto esters or p diketones) that are converted to stabilized anions under the reaction conditions Consequently ketone acylation is observed to the exclusion of aldol addition when ketones are treated with base m the presence of esters... 

Stabilized anions exhibit a pronounced tendency to undergo conjugate addition to a p unsaturated carbonyl compounds This reaction called the Michael reaction has been described for anions derived from p diketones m Section 18 13 The enolates of ethyl acetoacetate and diethyl malonate also undergo Michael addition to the p carbon atom of a p unsaturated aldehydes ketones and esters For example... 

Adducts of BF and some organic compounds having labile hydrogen atoms in the vicinity of the atom bonding to the boron atom of BF may form a derivative of BF by splitting out HF. For example, P-diketones such as acetylacetone or benzoylacetone react with BF in benzene (38) ... 

The basic metal salts and soaps tend to be less cosdy than the alkyl tin stabilizers for example, in the United States, the market price in 1993 for calcium stearate was about 1.30— 1.60, zinc stearate was 1.70— 2.00, and barium stearate was 2.40— 2.80/kg. Not all of the coadditives are necessary in every PVC compound. Typically, commercial mixed metal stabilizers contain most of the necessary coadditives and usually an epoxy compound and a phosphite are the only additional products that may be added by the processor. The requited costabilizers, however, significantly add to the stabilization costs. Typical phosphites, used in most flexible PVC formulations, are sold for 4.00— 7.50/kg. Typical antioxidants are bisphenol A, selling at 2.00/kg Nnonylphenol at 1.25/kg and BHT at 3.50/kg, respectively. Pricing for ESO is about 2.00— 2.50/kg. Polyols, such as pentaerythritol, used with the barium—cadmium systems, sells at 2.00, whereas the derivative dipentaerythritol costs over three times as much. The P-diketones and specialized dihydropyridines, which are powerful costabilizers for calcium—zinc and barium—zinc systems, are very cosdy. These additives are 10.00 and 20.00/kg, respectively, contributing significantly to the overall stabilizer costs. Hydrotalcites are sold for about 5.00— 7.00/kg. 

Copper is an attractive metallisation element because of its high conductivity. It has been added to Al in low concentrations (AlSi(l%)—Cu(0.5%)) to improve conductive priorities. Selective, low temperature copper CVD processing, using copper(I) P-diketonate compounds, has been carried out (23). 

Tris(2,4-pentanedionato)iron(III) [14024-18-1], Fe(C H202)3 or Fe(acac)3, forms mby red rhombic crystals that melt at 184°C. This high spin complex is obtained by reaction of iron(III) hydroxide and excess ligand. It is only slightly soluble in water, but is soluble in alcohol, acetone, chloroform, or benzene. The stmcture has a near-octahedral arrangement of the six oxygen atoms. Related complexes can be formed with other P-diketones by either direct synthesis or exchange of the diketone into Fe(acac)3. The complex is used as a catalyst in oxidation and polymerization reactions. 

PurpurogaHin (5), a red-brown to black mordant dye, forms from electrolytic and other mild oxidations of pyrogaHol (1). The reaction is beHeved to proceed through 3-hydroxy-(9-benzoquinone (2) and 3-hydroxy-6-(3,4,5-trihydroxyphenyl)-(9-benzoquinone (3). The last, in the form of its tautomeric triketonic stmcture, represents the vinylogue of a P-diketone. Acid hydrolysis leads to the formation of (4), foHowed by cyclization and loss of formic acid... 

From Hydrazines and P-Bifunctional Compounds. One of the oldest examples in this class is the reaction of a p-diketone with a substituted hydrazine to give a pyrazole (eq. 1). 

P-diketones Hostaiex DK16, LIX54 Hoechst, Henkel copper extraction from ammoniacal solution... 

Substitution of some of the alkoxy groups on the polytitanoxanes with glycols, P-diketones or P-ketoesters, fatty acids, diester phosphates or pyrophosphates, and sulfonic acids gives a group of products that are very effective surface-treating agents for carbon black, graphite, or fibers (32). 

Titanium chelates are formed from tetraalkyl titanates or haUdes and bi- or polydentate ligands. One of the functional groups is usually alcohoHc or enoHc hydroxyl, which interchanges with an alkoxy group, RO, on titanium to Hberate ROH. If the second function is hydroxyl or carboxyl, it may react similarly. Diols and polyols, a-hydroxycarboxyflc acids and oxaUc acid are all examples of this type. P-Keto esters, P-diketones, and alkanolamines are also excellent chelating ligands for titanium. 

P-Diketone Chelates. P-Diketones, reacting as enols, readily form chelates with titanium alkoxides, Hberating in the process one mole of an alcohol. TYZOR AA [17927-72-9] (6) is the product mixture from TYZOR TPT and two moles of acetylacetone (acac) reacting in the enol form. The isopropyl alcohol is left in the product (87). The dotted bonds of stmcture (6) indicate electron... 

P-Ketoester Chelates. p-Ketoesters react in a fashion similar to the p-diketones. TYZOR DC [27858-32-8] is the hght-yeUow Hquid from TYZOR TPT and two moles of ethyl acetoacetate (eaa) after removal of the isopropyl alcohol. TYZOR BEAT, the bis-ethylacetoacetate [20753-28-0] derived from the tetra- -butyl titanate, and TYZOR IBAY [83877-91-2] the isobutoxy analogue, perform similarly to TYZOR DC. Both, however, have better cold-storage stabiHty. 

Many stabilizers require costabilizers. Several organic costabilizers are quite useful with barium—zinc and calcium—zinc stabilizers, eg, P-diketones, epoxies, organophosphites, hindered phenols, and polyols (122). 

The tetracyclines are strong chelating agents. Both the A-ring and 11,12 P-diketone systems are active sites for chelation (16). This abiUty to chelate to metals, such as calcium, results in tooth discoloration when tetracycline is administered to children (17). 

Lipophilic P-Diketones. Arildone [56219-57-9] (43), and several other lipophilic p-diketones (Fig. 6) have exhibited significant... 

Fig. 6. lipophilic P-diketones and derivatives active against RNA vimses, especially rhinovims. 

Deprotonation of enols of P-diketones, not considered unusual at moderate pH because of their acidity, is faciUtated at lower pH by chelate formation. Chelation can lead to the dissociation of a proton from as weak an acid as an aUphatic amino alcohol in aqueous alkaU. Coordination of the O atom of triethanolamine to Fe(III) is an example of this effect and results in the sequestration of iron in 1 to 18% sodium hydroxide solution (Fig. 7). Even more striking is the loss of a proton from the amino group of a gold chelate of ethylenediamine in aqueous solution (17). 

AEyl chloride reacts with sodamide in Hquid ammonia to produce benzene when sodamide is in excess, hexadiene dimer is the principal product, with some trimer and tetramer (C24, six double bonds). AEylation at carbon atoms alpha to polar groups is used in the preparation of a-aEyl-substituted ketones and nittiles. Preparation of P-diketone derivatives, methionic acid derivatives, and malonic ester, cyanoacetic ester, and P-keto-ester derivatives, etc, involving substitution on an alpha carbon between two polar carbonyl groups, is particularly facEe. 

---