Olefins acetate addition

On the basis of the mechanism proposed for the addition of the same TeOj/LiBr/HOAc system to single olefins, the addition to conjugated dienes probably involves the acetoly-sis of a homoallylic and an allylic telluroacetate (or teUiirohaUde) generated by the initial addition of a Te(IV) species and an acetate (or halide) anion to the conjugated system. 

Among some metal oxygen compounds which add, palladium and thallium ion both oxidize olefins and apparently the initial step is the addition of a metal hydroxide across the olefin double bond. The intermediates have not been isolated because they go on to other products but kinetic and other evidence indicates that the addition of the hydroxide is the initial step. In the well known mercury acetate addition to olefins in alcohol solution one can isolate the /S-hydroxv or alkoxy ethylmercury derivatives. 

However, a method to improve the flow properties of such fuel oils of animal or vegetable origin, has been developed (26). This consists in adding a EVA copolymer or a comb polymer based on methyl acrylate and a-olefins. In addition, terpolymers of ethylene, vinyl acetate and isobutylene have been found to be useful as cold flow improvers (29). 

Strong differences in the reactivity of the aromatic C=C double bond compared to the reactivity of the C=C double bond of olefins are observed olefinic electrophilic additions are faster than aromatic electrophilic substitutions. For instance, the addition of molecular bromine to cyclohexene (in acetic acid) is about 1014 times faster than the formation of bromobenzene from benzene and bromine in acetic acid113,114. Nevertheless, the addition of halogens to olefins parallels the Wheland intermediate formation in the halogenation of aromatic substrates. 

The palladium acetate addition to 1-olefins in acetic acid solution is predominately of the Markovnikov type producing ketone enol esters 14>. 

Engman reported that the acetoxyselenenylation of alkenes could be better carried out with PhSeBr in acetic acid in the presence of acetic anhydride and KNO3 [40]. In the case of terminal olefins the addition proceeds with poor regio-control. However, when the chloroform solution of the two products was treated with catalytic amounts of boron trifluoride etherate, isomerization takes place and the anti-Markovnikov adduct was transformed into the Markovnikov product. The acetoxyselenenylation of alkenes can be cleanly effected also by oxidation of diphenyl diselenide with iodobenzene diacetate in acetonitrile [22]. 

Olefinic acetals, preparation, 263 preparations listed in table 23, 268 a, S-01efinic acetals, preparation, 37 Olefinic acetylenes, addition of alcohols, 233, 266 alkylation, SO partial reduction, 46 preparatioh, 34, 39, 46, 48, 80 preparations listed in table 6, 84 Olefinic acids, addition, of halogen, 107... 

If the reaction between enol silyl ethers and a,/ -unsaturated ketones is attempted in the presence of a titanium Lewis acid, the mode of the reaction switches to 1,4-addition with reference to the unsaturated ketone [109-113]. The reaction of an enol silyl ether is shown in Eq. (30) [114]. Ketene silyl acetals react with a,j8-unsaturated ketones in similar 1,4-fashion, as exemplified in Eq. (31) [115]. Acrylic esters, which often tend to polymerize, are also acceptable substrates for a, -unsaturated carbonyl compounds [111]. A difluoroenol silyl ether participated in this cationic reaction (Eq. 32) [116], and an olefinic acetal can be used in place of the parent a-methylene ketone [111] to give the 1,5-diketone in good yield (Eq. 33) [117]. More results from titanium-catalyzed 1,4-addition of enol silyl ethers and silyl ketene acetals to a,f -unsaturated carbonyl compounds are summarized in Table 4. 

Thus, coordination of the zinc to one of the diastereotopic oxygens and oriented anti to the adjacent dioxolane substituent places the transfer methylene on the face of the olefin toward the viewer, consistent with the observed absolute configuration. Note that coordination to the other oxygen and orienting anti to the adjacent substituent would place the transfer methylene distal to the double bond. A similar explanation can be offered to rationalize the results of the aldehyde acetal additions, assuming that the olefin adopts the indicated conformation in the transition state. 

A broad range of olefins, acetals, epoxides, alcohols, and chlorides were demonstrated effective alternative starting materials. Cobalt and rhodium carbonyls and bimetallic complexes catalyzed the domino hydroformylation-amidocarbonylation of olefins (17-22). Addition of 0.1 mol% RheCCOie to the cobalt catalyst gave branched AT-acetyltrifluorovaline, which indicated that the hydroformylation step governs the regioselectivity of the domino process (Scheme 4) (22). 

The photochemical reactivity of P-ketoesters is different form that of P-diketones. Irradiation of a P-ketoester in the presence of an alkene produces oxetane via the ketone carbonyl instead of the desired cyclobutane ring system. Therefore, it is necessary to covalently lock the ketoesters as the enol tautomers. To this end, silyl enol ethers, 129 and 132a, and enol acetates, 130 and 132b, were prepared, but these substrates still fail to undergo the desired intramolecular [2 + 2] photocycloaddition with olefins. The only new products observed in these reactions result from the photo-Fries rearrangement of the cyclic enol acetate (130 to 131) and cis-trans isomerization of both acyclic substrates 132a/b. However, tetronates are appropriate substrates for both intermolecular and intramolecular photocycloadditions with olefins. In addition, enol acetates and silyl enol ethers of p-keto esters are known to undergo [2 + 2] photoaddition with cyclic enones (vide infra). 

Certain features of the addition of acetyl nitrate to olefins in acetic anhydride may be relevant to the mechanism of aromatic nitration by this reagent. The rapid reaction results in predominantly cw-addition to yield a mixture of the y -nitro-acetate and y5-nitro-nitrate. The reaction was facilitated by the addition of sulphuric acid, in which case the 3rield of / -nitro-nitrate was reduced, whereas the addition of sodium nitrate favoured the formation of this compound over that of the acetate. As already mentioned ( 5.3. i), a solution of nitric acid (c. i 6 mol 1 ) in acetic anhydride prepared at — 10 °C would yield 95-97 % of the nitric acid by precipitation with urea, whereas from a similar solution prepared at 20-25 °C and cooled rapidly to —10 °C only 30% of the acid could be recovered. The difference between these values was attributed to the formation of acetyl nitrate. A solution prepared at room... 

T[[dotb]he nature of the initial attack by the water (eq. 10) is a matter of some controversy (205,206). Stereochemical and kinetic studies of model systems have been reported that support trans addition of external water (207,208) or internal addition of cis-coordinated water (209), depending on the particular model system under study. Other paHadium-cataly2ed oxidations of olefins ia various oxygen donor solvents produce a variety of products including aldehydes (qv), ketones (qv), vinyl acetate, acetals, and vinyl ethers (204). However the product mixtures are complex and very sensitive to conditions. 

The use of TAG as a curing agent continues to grow for polyolefins and olefin copolymer plastics and mbbers. Examples include polyethylene (109), chlorosulfonated polyethylene (110), polypropylene (111), ethylene—vinyl acetate (112), ethylene—propylene copolymer (113), acrylonitrile copolymers (114), and methylstyrene polymers (115). In ethylene—propylene copolymer mbber compositions. TAG has been used for injection molding of fenders (116). Unsaturated elastomers, such as EPDM, cross link with TAG by hydrogen abstraction and addition to double bonds in the presence of peroxyketal catalysts (117) (see Elastol rs, synthetic). 

One development involves the use of vitamin B 2 to cataly2e chemical, in addition to biochemical processes. Vitamin B 2 derivatives and B 2 model compounds (41,42) cataly2e the electrochemical reduction of alkyl haUdes and formation of C—C bonds (43,44), as well as the 2inc—acetic acid-promoted reduction of nitriles (45), alpha, beta-unsaturated nitriles (46), alpha, beta-unsaturated carbonyl derivatives and esters (47,48), and olefins (49). It is assumed that these reactions proceed through intermediates containing a Co—C bond which is then reductively cleaved. 

Unsaturated Hydrocarbons. Olefins from ethylene through octene have been converted into esters via acid-catalyzed nucleophilic addition. With ethylene and propjiene, only a single ester is produced using acetic acid, ethyl acetate and isopropyl acetate, respectively. With the butylenes, two products are possible j -butyl esters result from 1- and 2-butylenes, whereas tert-huty esters are obtained from isobutjiene. The C5 olefins give rise to three j iC-amyl esters and one /-amyl ester. As the carbon chain is lengthened, the reactivity of the olefin with organic acids increases. 

Ethylene has also been copolymerised with a number of non-olefinic monomers and of the copolymers produced those with vinyl acetate have so far proved the most significant commercially . The presence of vinyl acetate residues in the chain reduces the polymer regularity and hence by the vinyl acetate content the amount of crystallinity may be controlled. Copolymers based on 45% vinyl acetate are rubbery and may be vulcanised with peroxides. They are commercially available (Levapren). Copolymers with about 30% vinyl acetate residues (Elvax-Du Pont) are flexible resins soluble in toluene and benezene at room temperature and with a tensile strength of about lOOOlbf/in (6.9 MPa) and a density of about 0.95 g/cm. Their main uses are as wax additives and as adhesive ingredients. 

The addition proceeds most smoothly with highly functionalized (more polar) steroids as seen in examples by Bernstein and others. The polar reaction conditions pose solubility problems for lipophilic androstane, cholestane and pregnane derivatives. Improved yields can be obtained in some cases by using dimethyl sulfoxide or t-butanol " as solvents and by using sodium A-bromobenzenesulfonamide or l,3-dibromo-5,5-dimethyl hydantoin (available from Arapahoe Chemicals) as a source of positive bromine. The addition of bromo acetate and bromo formate to steroid olefins has been studied to a limited extent. ... 

---