Olefin complexes insertions

Cationic Fp (olefin) complexes [Fp = f/5-C5H5Fe(CO)2] undergo regio-specific addition of heteroatomic nucleophiles.32 Subsequent ligand transfer (carbonyl insertion) occurs with retention of configuration at the migrating center (R—Fe—CO -> RCOFe).33 A combination of these processes has provided a novel stereospecific azetidinone synthesis which can also be applied to condensed systems.34... 

The most famous mechanism, namely Cossets mechanism, in which the alkene inserts itself directly into the metal-carbon bond (Eq. 5), has been proposed, based on the kinetic study [134-136], This mechanism involves the intermediacy of ethylene coordinated to a metal-alkyl center and the following insertion of ethylene into the metal-carbon bond via a four-centered transition state. The olefin coordination to such a catalytically active metal center in this intermediate must be weak so that the olefin can readily insert itself into the M-C bond without forming any meta-stable intermediate. Similar alkyl-olefin complexes such as Cp2NbR( /2-ethylene) have been easily isolated and found not to be the active catalyst precursor of polymerization [31-33, 137]. In support of this, theoretical calculations recently showed the presence of a weakly ethylene-coordinated intermediate (vide infra) [12,13]. The stereochemistry of ethylene insertion was definitely shown to be cis by the evidence that the polymerization of cis- and trans-dideutero-ethylene afforded stereoselectively deuterated polyethylenes [138]. 

In contrast, methyl cyclopropenone is reported283) to react with the Pt-olefin complex 455 at low temperature with replacement of the olefin ligand. In the resulting complex 456 the cyclopropenone interacts with the central atom via the C /C2 double bond according to spectroscopic evidence284). At elevated temperatures a metal insertion to the C1<2)/C3 bond occurs giving rise to 457. Pt complexes of a similiar type were obtained from dimethyl and diphenyl cyclopropenone on reaction with 455 and their structures were established by X-ray analysis285). 

The electronics behind the insertion reaction is generally explained in terms of a simple three-orbitals four-electrons scheme. Hoffmann and Lauher early recognized that this is an easy reaction for d° complexes, and the relevant role played by the olefin n orbital in determining the insertion barrier [26], According to them, the empty Jt orbital of the olefin can stabilize high energy occupied d orbitals of the metal in the olefin complex, but this stabilization is lost as the insertion reaction approaches the transition state. The net effect is an energy increase of the metal d orbitals involved in the d-7t back-donation to the olefin n orbital. Since for d° systems this back-donation does not occur, d° systems were predicted to be barrierless, whereas a substantial barrier was predicted for dn (n > 0) systems [26],... 

Since molecular mechanics cannot be used to calculate the energy of transition states, suitable models were adopted. These models are extremely similar to the Jt-olefin complex with an orientation of the growing chain rather similar to that adopted when a a-agostic interaction is present. They were often called pre-insertion intermediates because the insertion transition state could be reached from these intermediates with a minimal displacement of the reacting atoms. 

From alkyl complex p0, the olefin can be captured to form the Jt-complex TCo, and inserted via 1,2- or 2,1-insertion route. In the model applied here we consider the olefin capture and its insertion as one reactive event i.e. we assume a pre-equilibrium between the alkyl and olefin complexes, described by an equilibrium constant Kcompi = [icq] / [Pol = exp (AGcomp . / RT). This... 

Instead of having the olefin insertion reactions, the calculations indicate that M2b and M2c can only proceed uphill with the reductive elimination of HB(OH)2, leading to the formation of M3, an olefin complex which could be in principle obtained directly from the addition of olefin to the catalyst Rh (PH3)2C1. The olefin complex M3 then could undergo a-bond metathesis processes with HB(OH)2, giving two isomeric products M4 and M5 depending on the orientation of the HB(OH)2 borane. The a-bond metathesis processes are however found to be unfavorable because of the very high reaction barriers (Figure 4). 

Examples of catalytic formation of C-C bonds from sp C-H bonds are even more scarce than from sp C-H bonds and, in general, are limited to C-H bonds adjacent to heteroatoms. A remarkable iridium-catalyzed example was reported by the group of Lin [116] the intermolecular oxidative coupling of methyl ethers with TBE to form olefin complexes in the presence of (P Pr3)2lrH5 (29). In their proposed mechanism, the reactive 14e species 38 undergoes oxidative addition of the methyl C-H bond in methyl ethers followed by olefin insertion to generate the intermediate 39. p-hydride elimination affords 35, which can isomerize to products 36 and 37 (Scheme 10). The reaction proceeds under mild condition (50°C) but suffers from poor selectivity as well as low yield (TON of 12 after 24 h). 

Aluminium tri-n-alkyls are dimeric in solution, although - especially for higher alkyls - the fraction of monomer can become significant at higher temperatures [ 19] in the gas phase they are usually monomeric. Kinetic evidence indicates that olefin insertion involves a monomeric aluminium trialkyl this suggests a Cossee-type insertion mechanism. Kinetic data do not indicate the presence of an intermediate olefin 7c-complex [23]. However, if the olefin complexation energy at the 7c-complex stage is low, this would be expected. 

Titanium-catalyzed cyclization/hydrosilylation of 6-hepten-2-one was proposed to occur via / -migratory insertion of the G=G bond into the titanium-carbon bond of the 77 -ketone olefin complex c/iatr-lj to form titanacycle cis-ll] (Scheme 16). cr-Bond metathesis of the Ti-O bond of cis- iij with the Si-H bond of the silane followed by G-H reductive elimination would release the silylated cyclopentanol and regenerate the Ti(0) catalyst. Under stoichiometric conditions, each of the steps that converts the enone to the titanacycle is reversible, leading to selective formation of the more stable m-fused metallacycle." For this reason, the diastereoselective cyclization of 6-hepten-2-one under catalytic conditions was proposed to occur via non-selective, reversible formation of 77 -ketotitanium olefin complexes chair-1) and boat-1), followed by preferential cyclization of chair-1) to form cis-11) (Scheme 16). 

Jack Halpern Perhaps I have more reason than anyone else to be disposed to the view that 7r-complexing is an important step of the insertion reaction, because I think that possibly we have the only reasonably clear cut case of an olefin insertion reaction where a complex is clearly implicated. This is the ruthenium chloride-catalyzed hydrogenation of certain olefins, which almost certainly involves the insertion of the olefin into a ruthenium hydrogen bond and where certainly a ruthenium olefin complex is involved as an observable reactant. Nevertheless, I am not at all sure to what extent this is a general or necessary feature of such insertion reactions. The important question is whether one or two coordination positions on the metal ion are involved in the transition state of the insertion reaction. For example, if one considers the insertion of an olefin, say into an M—X bond, then the transition state may look something like ... 

In many of these systems, the postulated olefin complex intermediate would be labile. Therefore, its role as a pre-equilibrium intermediate is not terribly relevant to the kinetic problem. I think the relevant feature is whether the favorable paths in these insertion reactions involve the first or second type of transition state. This perhaps de-emphasizes the question of whether or not a 7r-bonded intermediate is involved but certainly does focus attention on the question of whether a coordinated unsaturated species is involved as a reactant. This is because the first type of transition state will require two coordination positions and hence involve the elimination of some other ligand before it can form, whereas the second will not. I don t know the answer to this question but this is how I would formulate the problem. 

We are currently trying to answer specifically the question of whether ir-bonded complexes do occur in certain cases where insertion reactions are observed. I think they do because I believe that the same factors which favor stabilization of this type of transition state will also tend to favor formation of 7r-bonded olefin complexes, which are only slightly removed from this. At the moment Bern Tinker is examining the insertion of olefins in mercuric complexes to see whether there is any indication of 7r-bonded intermediates. In his paper, Dr. Heck referred to some unpublished work relevant to this theme. I would certainly be interested in anything more he can tell us about that. 

We discussed this catalysis recently (141st National Meeting of the American Chemical Society, March 1962) in terms of an olefin insertion reaction involving a Pt(II) olefin complex (3). We found that catalysis was only accomplished by platinum compounds capable of coordinating olefins. For example, substitution by tertiary phosphines blocks coordination by olefins and greatly reduces the catalytic activity of Pt(II). The substitution by phosphines does not affect the ability of the complexes to cleave the Si—H bond, however. The hindering of a catalytic reaction by blocking coordination sites is a common occurrence and is, I think, a persuasive... 

My last comment concerns the reaction of palladium olefin complexes with carbon monoxide discovered by Tsuji. I agree that this is most likely to proceed by an insertion rather than an ionic mechanism. Chloride attack on coordinated olefin is rare however. Chloride ion is an inhibitor, for example in the palladous chloride catalyzed hydration of ethylene (0). I, therefore, wondered whether carbon monoxide was affecting the ease with which chloride attacks olefin. One can postulate that carbon monoxide participates in this insertion either as a gas phase reactant or by first forming a carbonyl olefin complex. Such complexes of the noble metals were unknown, but examining the reaction between carbon monoxide and the halogen bridged olefin complexes of platinum revealed that they are formed very readily... 

An attempt was also made to produce 0-iodo acyl iodides by the reaction of iodine, carbon monoxide and olefins in the presence of palladium or platinum chloride. This is, in effect, an attempt to make Dr. Tsuji s reaction catalytic rather than stoichiometric. No carbonyl insertion occurred at 1 atm. of carbon monoxide. However, it was found that iodination of the olefin was catalyzed by platinum olefin complexes and that an additional increase in catalytic activity accompanied the presence of carbon monoxide. There has been much speculation at this conference concerning the possibility of affecting catalytic activity by changing the ligands in the coordination sphere of the catalyst. This would appear to be such a case. 

The results do not prove that in the reaction conditions used the alkyl formation is not reversible, but only that, if it is reversible, the carbon monoxide insertion on both diastereomeric rhodium-alkyls must be much faster than the rhodium-alkyls decomposition. Restricting this analysis of the asymmetric induction phenomena to the rhodium-alkyl complexes formation, two 7r-olefin complexes are possible for each diastereomer of the catalytic rhodium complex (see Scheme 11). The induction can take place in the 7r-olefin complexes formation (I — II(S) or I — II(R)) or in the equilibrium between the diastereomeric 7r-olefin complexes (II(r) and... 

Olefinic compounds will often insert into carbon-transition metal bonds as CO does, and this reaction is an important step in many catalytic syntheses. When this step is combined with an oxidative addition of an organic halide to a palladium(O) complex in the presence of a base, a very useful, catalytic olefinic substitution reaction results (26-29). The oxidative addition produces an organopalladium(II) halide, which then adds 1,2 to the olefinic reactant (insertion reaction). The adduct is unstable if there are hydrogens beta to the palladium group and elimination of a hydridopalladium salt occurs, forming a substituted olefinic product. The hydridopalladium salt then reforms the... 

We first established that hydrocarbonylation reactions occur with cis-stereochemistry (29, 16) and that asymmetric induction occurs before or during the formation of the metal alkyl intermediate (5, 6). This means that is either during the 7r-olefin complex formation between catalyst and substrate or during the insertion of the 7r-complexed olefin into the M-H bond. Therefore, the model should focus on the interactions between the substrate double bond and the catalytically active metal atom of the catalyst. 

The cycle is started with the formation of a Pd-alkoxy complex that reacts with CO to an alkoxycarbonyl intermediate. In the next step, the approach of the olefin and insertion into the carbonyl palladium bond is predicted. In the last step, the starting complex is rebuilt by the addition of an alcohol and the cleavage of the hydroesterification product [59]. 

Over 35 years ago, Richard F. Heck found that olefins can insert into the metal-carbon bond of arylpalladium species generated from organomercury compounds [1], The carbopalladation of olefins, stoichiometric at first, was made catalytic by Tsutomu Mizoroki, who coupled aryl iodides with ethylene under high pressure, in the presence of palladium chloride and sodium carbonate to neutralize the hydroiodic acid formed (Scheme 1) [2], Shortly thereafter, Heck disclosed a more general and practical procedure for this transformation, using palladium acetate as the catalyst and tri-w-butyl amine as the base [3], After investigations on stoichiometric reactions by Fitton et al. [4], it was also Heck who introduced palladium phosphine complexes as catalysts, enabling the decisive extension of the ole-fination reaction to inexpensive aryl bromides [5],... 

---