Palladium complexes with olefins

However, the practical, direct synthesis of functionalized linear polyolefins via coordination copolymerization olefins with polar monomers (CH2 = CHX) remains a challenging and industrially important goal. In the mid-1990s Brookhart et al. [25, 27] reported that cationic (a-diimine)palladium complexes with weakly coordinating anions catalyze the copolymerization of ethylene with alkylacrylates to afford hyperbranched copolymers with the acrylate functions located almost exclusively at the chain ends, via a chain-walking mechanism that has been meticulously studied and elucidated by Brookhart and his collaborators at DuPont [25, 27], Indeed, this seminal work demonstrated for the first time that the insertion of acrylate monomers into certain late transition metal alkyl species is a surprisingly facile process. It spawned almost a decade of intense research by several groups to understand and advance this new science and to attempt to exploit it commercially [30-33, 61]. 

The similarity in the mechanisms of the two carbonylations is apparent. In the / -chloroacyl chloride formation, the first step is the insertion of olefins into the palladium-chlorine bond. For the catalytic carbonylations, the insertion of olefins takes place to the palladium hydride complex formed in situ. In both cases, divalent palladiums react with olefins. 

The final step of the catalytic cycle, base-assisted reductive elimination, has been addressed by Deeth et al. [14]. In their calculations, the authors investigated palladium complexes with the chelating diaminomethane H2N(CH2)NH2 and di-phosphinomethane H2P(CH2)PH2 ligands. Within this system, they found that the postulated hydrido-olefin complex, which is usually formed by p-H elimination of the y9-agostic insertion product, is in fact not a stable minimum structure in this particular case (eq. (11)) [14]. 

Wacker-type oxidative reactions of olefins with nucleophiles, reactions of zr-allyl-palladium complexes with nucleophiles, reactions based on chelation, and trans-metallation of organomercury compounds. 

The third type of reaction involves ligand displacement of tetrakis(tertiary phos-phine)-palladium(O) complexes with olefins (eq (54)) [74]. Since the coordination of olefin competes with the phosphine coordination in the reaction system, this route is only applicable to the olefins bearing highly electron-withdrawing substituents. 

Insertions of vinylic palladium halides with olefins not conjugated with carbonyl groups is more complex. Rearrangement of the initial insertion product to a i-allyl-palladium derivative usually occurs as in Eq. (p). Since the a -allylic complexes are relatively stable, catalytic reactions to form dienes with tertiary amines as bases are slow and inefficient . A useful catalytic reaction occurs, however, if a nucleophilic secondary amine is used as base instead of the tertiary amine. The a-allylic palladium intermediates are attacked by the amine to form tertiary allylic amines and regenerate the catalyst ... 

As early as 1963, Tsuji and colleagues described the reaction of olefin-palladium chloride complexes with CO to produce jS-chloroacyl chlorides [1,2]. Both internal and terminal aliphatic olefins were transformed into the corresponding chloroesters when the reaction was conducted in alcohols. Later on, in 1969, Yukawa and Tsutsumi reported on the reaction of a styrene-palladium complex with CO in alcohols [3]. Here, various cinnamates and phenylsuccinates were synthesized. Compared with Tsuji s work, they proposed a different reaction mechanism. They assumed that the oxidative addition of the alkyloxycarbonyl groups into styrenes is the key step, but a stoichiometric amount of palladium was stiU necessary to perform the reaction. Another version of a dialkoxycarbonylation of olefins was reported by Heck [4], using mercuric chloride as additive. 

The synthesis of (-)-A -acetyl-O-methylacosamine, " an amino sugar, is an interesting application of the process of cis-hydroxyamination catalyzed by palladium complexes of olefins developed by Trost and Sudhakar. Enantiomerically pure aldehyde 263 was first transformed to vinyl epoxide 264. The latter reacted smoothly with p-toluene sulfonyliso-cyanate in the presence of 1-3 mol% of palladium and 6-18 mol% of tiiisopropyl phosphite in THF at room temperature. As thermal reaction favored 0-aIkylation, these conditions led exclusively to A-p-toluenesulfonyl-2-oxazolidone 265 as shown in Scheme 60. 

The reduction of palladium(ii) complexes (often with Li2(COT)) in the absence of other ligands is an experimentally demanding but convenient and fairly general method for the preparation of palladium(O) complexes with olefins, and was used to prepare a complex with methylacrylate (MA), Pd(dppf)( 7 -MA), from PdCl2(dppf), Li2(COT), and MA. ... 

Heck reaction, palladium-catalyzed cross-coupling reactions between organohalides or triflates with olefins (72JOC2320), can take place inter- or intra-molecularly. It is a powerful carbon-carbon bond forming reaction for the preparation of alkenyl- and aryl-substituted alkenes in which only a catalytic amount of a palladium(O) complex is required. 

Nickel and palladium react with a number of olefins other than ethylene, to afford a wide range of binary complexes. With styrene (11), Ni atoms react at 77 K to form tris(styrene)Ni(0), a red-brown solid that decomposes at -20 °C. The ability of nickel atoms to coordinate three olefins with a bulky phenyl substituent illustrates that the steric and electronic effects (54,141) responsible for the stability of a tris (planar) coordination are not sufficiently great to preclude formation of a tris complex rather than a bis (olefin) species as the highest-stoichiometry complex. In contrast to the nickel-atom reaction, chromium atoms react (11) with styrene, to form both polystyrene and an intractable material in which chromium is bonded to polystyrene. It would be interesting to ascertain whether such a polymeric material might have any catal3dic activity, in view of the current interest in polymer-sup-ported catalysts (51). 

The mechanism for the reaction catalyzed by cationic palladium complexes (Scheme 24) differs from that proposed for early transition metal complexes, as well as from that suggested for the reaction shown in Eq. 17. For this catalyst system, the alkene substrate inserts into a Pd - Si bond a rather than a Pd-H bond [63]. Hydrosilylation of methylpalladium complex 100 then provides methane and palladium silyl species 112 (Scheme 24). Complex 112 coordinates to and inserts into the least substituted olefin regioselectively and irreversibly to provide 113 after coordination of the second alkene. Insertion into the second alkene through a boat-like transition state leads to trans cyclopentane 114, and o-bond metathesis (or oxidative addition/reductive elimination) leads to the observed trans stereochemistry of product 101a with regeneration of 112 [69]. 

Palladium(II) complexes possessing bidentate ligands are known to efficiently catalyze the copolymerization of olefins with carbon monoxide to form polyketones.594-596 Sulfur dioxide is an attractive monomer for catalytic copolymerizations with olefins since S02, like CO, is known to undergo facile insertion reactions into a variety of transition metal-alkyl bonds. Indeed, Drent has patented alternating copolymerization of ethylene with S02 using various palladium(II) complexes.597 In 1998, Sen and coworkers also reported that [(dppp)PdMe(NCMe)]BF4 was an effective catalyst for the copolymerization of S02 with ethylene, propylene, and cyclopentene.598 There is a report of the insertion reactions of S02 into PdII-methyl bonds and the attempted spectroscopic detection of the copolymerization of ethylene and S02.599... 

Enantioselective carbenoid cyclopropanation can be expected to occur when either an olefin bearing a chiral substituent, or such a diazo compound or a chiral catalyst is present. Only the latter alternative has been widely applied in practice. All efficient chiral catalysts which are known at present are copper or cobalt(II) chelates, whereas palladium complexes 86) proved to be uneflective. The carbenoid reactions between alkyl diazoacetates and styrene or 1,1 -diphenylethylene (Scheme 27) are usually chosen to test the efficiency of a chiral catalyst. As will be seen in the following, the extent to which optical induction is brought about by enantioselection either at a prochiral olefin or at a prochiral carbenoid center, varies widely with the chiral catalyst used. 

The first examples of highly active olefin polymerization catalysts based on late transition metals were nickel and palladium complexes containing bulky diimine ligands.310 312 For example, complex (120) was found to polymerize ethylene with an activity of ll,000gmmol h bar A range of PE materials with molecular weights up to 106 and... 

Several combinatorial approaches to the discovery of transition metal based catalysts for olefin polymerization have been described. In one study Brookhart-type polymer-bound Ni- and Pd-(l,2-diimine) complexes were prepared and used in ethylene polymerization (Scheme 3).60,61 A resin-bound diketone was condensed with 48 commercially available aminoarenes having different steric properties. The library was then split into 48 nickel and 48 palladium complexes by reaction with [NiBr2(dme)] and [PdClMe(COD)], respectively, all 96 pre-catalysts being spatially addressable. 

Trimethyl-l,3-dioxane (146) is the major product formed when the palladium complex of 3-methy 1-1 -butene is treated with formaldehyde. The dioxane products (146, 147) can also be obtained directly in improved yield from the olefin using the catalytic system PdCl2-CuCI2 (Scheme 169).240... 

It has been found that A-tosyl aziridines undergo oxidative addition to palladium complexes to form azapalladacyclobutanes <06JA15415>. Reaction of aziridine 95 with Pd2(dba)3 and 1,10-phenanthroline provides the palladacycle 96 in 45% isolated yield. This compound is an air stable solid. Treatment the palladacycle 96 with catalytic Cul is believed to open the palladacycle to form a copper intermediate, which cyclizes to cyclopentyl alkylpalladium intermediate 97. Loss of Cul then provides the product palladacycle 97 as an air stable solid. Several different aziridines were examined in this reaction. Only a limited set of olefin substituted aziridines provided the azapalladacyclobutanes (e.g. 96). 

The Heck reaction, a palladium-catalyzed vinylic substitution, is conducted with olefins and organohalides or pseudohalides are frequently used as reactants [15, 16], One of the strengths of the method is that it enables the direct monofunctionalization of a vinylic carbon, which is difficult to achieve by other means. Numerous elegant transformations based on Heck chemistry have been developed in natural and non-natural product synthesis. Intermolecular reactions with cyclic and acyclic al-kenes, and intramolecular cyclization procedures, have led to the assembly of a variety of complex and sterically congested molecules. 

New approaches to catalyst recovery and reuse have considered the use of membrane systems permeable to reactants and products but not to catalysts (370). In an attempt to overcome the problem of inaccessibility of certain catalytic sites in supported polymers, some soluble rho-dium(I), platinum(II), and palladium(II) complexes with noncross-linked phosphinated polystyrene have been used for olefin hydrogenation. The catalysts were quantitatively recovered by membrane filtration or by precipitation with hexane, but they were no more active than supported... 

Chalk and Elarrod (11a) compared the above ethylene Pt(II) complex with chloroplatinic acid for hydrosilation, and found that each gave essentially the same results in terms of rate, yields, and products. Plati-num(II) complexes and rhodium(I) complexes were very much alike in their behavior. No system was found in which a palladium olefin complex brought about hydrosilation. In most systems the palladium complex was very rapidly reduced to the metal. 

---