Odorless solvents

Before the naphtha is redistilled into a number of fractions with boiling ranges suitable for aliphatic solvents, the naphthas are usually treated to remove sulfur compounds, as well as aromatic hydrocarbons, which are present in sufficient quantity to cause an odor. Aliphatic solvents that are specially treated to remove aromatic hydrocarbons are known as deodorized solvents. Odorless solvent is the name given to heavy alkylate used as an aliphatic solvent, which is a by-product in the manufacture of aviation alkylate. 

Hexogen Octoate [AKZO]. TM for a series of paint driers made with odorless solvents, essentially solutions of metallic salts of 3-ethylhex-oic acid. 

Also Aeroshell Turbine Oil and AMSCO Odorless Solvent (T2). 8 sieve-plates in column. 

Odorless solvent n. Solvents generally of the mineral spirits type, that are synthesized by the aklylation process and refined to remove odorous aromatics and sulfur compounds. 

FCCCIF2. A colorless, nearly odorless solvent that boils at 47° C, formerly used as a blowing agent for integral-skin polyurethane foam, but now because of its suspected action on stratospheric ozone, being phased out. 

The synthetic isoparaffins are suitable solvents for alkyd and acrylic paint formulations. These virtually odorless solvents and their low surface tensions offer improved flow and wetting properties to the paints. The excellent wetting characteristics of these solvents are desirable in formulations such as furniture polishes, car polishes, and waterless hand cleaners. The low surface tension of these solvents reduces the amount of surfactants needed in emulsified products and affords improved wetting of pigments in ink and coating formulations. The isoparaffins are used as an inert process solvent in the manufacture of polyolefins and certain rubbers. In the slurry polymerization process the isoparaffins afford solvency for the Ziegler-type catalyst and the ethylene monomer, but no solvency for the polyolefin polymer product. 

Mineral Spirits n plural but singular or plural in construction (1927) (naphtha) An aliphatic-hydrocarbon fraction of petroleum evolved in the distillation range of about 150-200°C. An example is VM P naphtha , used as a diluent in organosols. It is a petroleum fraction with boiling range between 300° F and 400° F. Due to having a low aromatic hydrocarbon content, with volatility, flash point, and other properties this makes it suitable as a thinner and solvent in paints, varnishes, and similar products. Syn is Petroleum Spirits. See also Odorless Solvent. 

Acetamide [60-35-5] C2H NO, mol wt 59.07, is a white, odorless, hygroscopic soHd derived from acetic acid and ammonia. The stable crystalline habit is trigonal the metastable is orthorhombic. The melt is a solvent for organic substances it is used ia electrochemistry and organic synthesis. Pure acetamide has a bitter taste. Unknown impurities, possibly derived from acetonitrile, cause its mousy odor (1). It is found ia coal mine waste dumps (2). 

Chlorosulfonated Polyethylene. This elastomer is made by the simultaneous chlorination and chlorosulfonation of polyethylene in an inert solvent. The resulting polymer is an odorless, colorless chip that is mixed and processed on conventional mbber equipment. The polymer typically contains 20-40% chlorine and 1% sulfur groups (see ElASTOL RS, SYNTHETIC-Cm OROSULFONATEDPOLYETHYLENE) (8). 

Physica.1 Properties. Carbonyl sulfide [463-58-1] (carbon oxysulfide), COS, is a colorless gas that is odorless when pure however, it has been described as having a foul odor. Physical constants and thermodynamic properties are Hsted ia Table 1 (17,18). The vapor pressure has been fitted to an equation, and a detailed study has been made of the phase equiUbria of the carbonyl sulfide—propane system, which is important ia the purification of propane fuel (19,20). Carbonyl sulfide can be adsorbed on molecular sieves (qv) as a means for removal from propane (21). This approach has been compared to the use of various solvents and reagents (22). 

Physical Properties. Anhydrous sodium sulfite [7757-83-7] Na2S02, is an odorless, crystalline soHd and most commercial grades other than by-product materials are colorless or off-white (331—334). It melts only with decomposition. The specific gravity of the pure soHd is 2.633 (15.4°C). Sodium sulfite is quite soluble in water. It has a maximum solubiHty of 28 g/100 g sol at 33.4°C at higher and lower temperatures, it is less soluble in water. Below this temperature, the heptahydrate crystallizes above this temperature, the anhydrous salt crystallizes. Sodium sulfite is soluble in glycerol but insoluble in alcohol, acetone, and most other organic solvents. 

Poly(vinyl acetate) latex paints are the first choice for interior use (149). Their abihty to protect and decorate is reinforced by several advantages belonging exclusively to latex paints they do not contain solvents so that physiological harm and fire ha2ards are eliminated they are odorless they are easy to apply with spray gun, roUer-coater, or bmsh and they dry rapidly. The paint can be thinned with water, and bmshes or coaters can be cleaned with soap and tepid water. The paint is usually dry in 20 minutes to two hours, and two coats may be applied the same day. 

Salts and Derivatives. Generally the vitamers are high melting crystalline soHds that are very soluble in water and insoluble in most other solvents. Properties of the common forms are Hsted in Table 1. The only commercially important form of vitamin B is pytidoxine hydrochloride (7). This odorless crystalline soHd is composed of colorless platelets melting at 204—206°C (with decomposition). In bulk, it appears white and has a density of - 0.4 kg/L. It is very soluble in water (ca 0.22 kg/L at 20°C), soluble in propylene glycol, slightly soluble in acetone and alcohol (ca 0.014 kg/L), and insoluble in most lipophilic solvents. A 10% water solution shows a pH of 3.2. Both the hydrochloride and corresponding free base sublime without decomposition (16). 

Ohservahle Characteristics - Physical State (as shipped) Liquid Color Colorless Odor Odorless weak chlorinated solvent. 

A variety of formulations exist for cleaning organics from burners and other fireside areas. Soot, oil, and grease removers are widely available the formulations are often very specific and can be produced in both aqueous and nonaqueous solvent bases. Nonaqueous solvents commonly include petroleum spirit, naphtha, or odorless kerosene. 

The distilled product can be used as a catalyst, although it usually has a relatively strong phenylphosphine odor. It is quite deliquescent, and it has not been satisfactorily recrystallized. If rigorous purification and deodorization are desired, the product is dissolved in water, a small amount of hydrogen peroxide is added to oxidize the phosphines, the solution is reneutralized, saturated with salt, and extracted with chloroform, and the product is refractionated. One cycle is normally enough. Pure product is essentially odorless, very hygroscopic, and soluble in polar solvents. 

Liquid PCP often contains volatile solvents that impart an "etherlike" odor to the patient, although PCP itself is odorless. PCP is nonvolatile at room temperatures, but ether is highly volatile. Undoubtedly, some of the acute reactions that occur after exposure to street "PCP fumes"1 are due to the effects of the ether and not to PCP. Several reactions of this type have been observed, such... 

Both DDT and chlordan are used in colorless, odorless, deobase-type solvent DDT in 5% solution and chlordan in 2% solution. The oil solvent is used because it is a nonconductor and because experience has shown that the crystals from a film of oil solvent solution adhere more firmly to the surface sprayed. A pressure-type spray tank, either a hand pump or mechanical source of air pressure, is used, with a special nozzle which gives a fan-shaped nonmisting spray. A special dripless valve is used. Several valves and nozzles which meet these requirements are on the market. The appropriate areas are sprayed with this fan-shaped painting spray stream, so that the surface glistens with the wet film but there is not sufficient quantity to run down. Experience has shown that this will leave approximately 200 mg. of DDT per square foot or an equivalent amount of chlordan. This procedure is recommended by the U. S. Public Health Service in its spraying technique for residences and food establishments treated in its program of spraying DDT only for malaria control. It has not as yet recommended chlordan for this use. Specifications for the sprayer nozzles procedure can be obtained from this source. 

Pure parathion is a pale yellow, practically odorless oil, which crystallizes in long white needles melting at 6.0° C. (17). It is soluble in organic solvents, except kerosenes of low aromatic content, and is only slightly soluble in water (15 to 20 p.p.m. at 20° to 25° C.). Peck (35) measured its rate of hydrolysis to diethyl thiophosphate and nitro-phenate ions in alkaline solutions. He found that the reaction kinetics are first order with respect to the ester and to hydroxyl ion. In normal sulfuric acid the rate of hydrolysis was the same as in distilled water. Peck concluded that hydrolysis takes place by two mechanisms—a reaction catalyzed by hydroxyl ions and an independent uncatalyzed reaction with water. He calculated that at a pH below 10 the time for 50% hydrolysis at 25° C. is 120 days in the presence of saturated lime water the time is 8 hours. The over-all velocity constant at 25° C. is k = 0.047 [OH-] + 4 X 10-6 min.-1... 

The chaotropic properties of many chemical compounds prevent the H2O cage structures necessary for the formation of solvates and thus facilitate the transfer of nonpolar molecules between nonaqueous and aqueous phases. Water is incombustible and nonflammable, odorless and colorless, and is universally available in any quality important prerequisites for the solvent of choice in catalytic processes. The DK and d can be important in particular reactions and are advantageously used for the analysis and control of substrates and products. The favorable thermal properties of water make it highly suitable for its simultaneous dual function as a mobile support and heat transfer fluid, a feature that is utilized in the RCH/RP process (see below). 

Until recently, the idea of a recyclable, non-volatile solvent seemed like the stuff of science fiction. But in the 1980s, researchers in the United States were trying to create a new electrolyte for batteries. Instead, they created a colourless, odorless liquid that was composed of nothing but ions—an ionic liquid. 

---