Primary objective

Factual databases mainly contain alphanumeric data on chemical compounds. In contrast to bibliographic databases, factual databases directly describe the objects primary data on chemical compounds) and provide the required information on them. Factual databases can be divided into numeric databases, metadatabases, research project databases, and catalogs of chemical compounds. 

Objective Primary focus on wealth generation for business Primary focus on pursuit of public good... 

The design provides for on-line monitoring the state of equipment and components with the help of special diagnostic systems (noise diagnostics, monitoring the equipment vibration, detection of loose and poor fixed objects, primary-to-secondary leak monitoring). Special systems are provided for information support of the operation (safety parameters display system, equipment residual life assessment system, operator s support system). 

Step Objective Primary materials Alternative materials... 

One of the primary objectives of production operations is to deliver product at the required rate and quality. Therefore the product quality specification and any agreed contract terms will drive the activities of the production operations department, and will be a starting point for determining the preferred mode of operation. The specifications, such as delivery of stabilised crude with a BS W of less than 0.5%, and a salinity of 70 g/m, ... 

The primary source energy can be switched between 6, 9 and 11 MeV. So it is possible to penetrate and examine up to 0.6 m solid steel objects. In front of the accelerator a collimator... 

One of the primary goals of current research in the area of tribology is to understand how it is that the kinetic energy of a sliding object is converted into internal energy. These dissipation mechanisms detennine the rate of energy flow from macroscopic motion into the microscopic modes of the system. Numerous mechanisms can be... 

The easiest way to extract a set of objects from the basic dataset, in order to compile a test set, is to do so randomly. This means that one selects a certain number of compounds from the initial (primary) dataset without considering the nature of these compounds. As mentioned above, this approach can lead to errors. 

Another method of detection of overfitting/overtraining is cross-validation. Here, test sets are compiled at run-time, i.e., some predefined number, n, of the compounds is removed, the rest are used to build a model, and the objects that have been removed serve as a test set. Usually, the procedure is repeated several times. The number of iterations, m, is also predefined. The most popular values set for n and m are, respectively, 1 and N, where N is the number of the objects in the primary dataset. This is called one-leave-out cross-validation. 

Our primary objective in this section is the discussion of practical osmometry, particularly with the goal of determining the molecular weight of a polymeric solute. We shall be concerned, therefore, with the design and operation of osmometers, with the question of units, and with circumventing the problem of nonideality. The key to these points is contained in the last section, but the details deserve additional comment. 

Our primary objective in undertaking this examination of the coil expansion factor was to see whether the molecular weight dependence of a could account for the fact that the Mark-Houwink a coefficient is generally greater than 0.5 for T 0. More precisely, it is generally observed that 0.5 < a < 0.8. This objective is met by combining Eqs. (9.55) and (9.68) ... 

Once the primary electron beam is created, it must be demagnified with condenser lenses and then focused onto the sample with objective lenses. These electron lenses are electromagnetic in nature and use electric and magnetic fields to steer the electrons. Such lenses are subject to severe spherical and chromatic aberrations. Therefore, a point primary beam source is blurred into a primary beam disk to an extent dependent on the energy and energy spread of the primary electrons. In addition, these lenses are also subject to astigmatism. AH three of these effects ultimately limit the primary beam spot size and hence, the lateral resolution achievable with sem. 

Chemical analysis of the metal can serve various purposes. For the determination of the metal-alloy composition, a variety of techniques has been used. In the past, wet-chemical analysis was often employed, but the significant size of the sample needed was a primary drawback. Nondestmctive, energy-dispersive x-ray fluorescence spectrometry is often used when no high precision is needed. However, this technique only allows a surface analysis, and significant surface phenomena such as preferential enrichments and depletions, which often occur in objects having a burial history, can cause serious errors. For more precise quantitative analyses samples have to be removed from below the surface to be analyzed by means of atomic absorption (82), spectrographic techniques (78,83), etc. 

The arrest of deterioration and the prevention of its recurrence has higher priority than restoration. Thus, identification of the causes of a problem and the design of measures to stabilize and consoHdate the object are primary considerations. Removal of the symptoms and restoration of the visual appearance comes only after the physical iategrity has beea safeguarded. 

The raw ROM (run of mine) ore is reduced in size from boulders of up to 100 cm in diameter to about 0.5 cm using jaw cmshers as weU as cone, gyratory, or roU-type equipment. The cmshed product is further pulverized using rod mills and ball mills, bringing particle sizes to finer than about 65 mesh (230 p.m). These size reduction (qv) procedures are collectively known as comminution processes. Their primary objective is to generate mineral grains that are discrete and Hberated from one another (11). Liberation is essential for the exploitation of individual mineral properties in the separation process. At the same time, particles at such fine sizes can be more readily buoyed to the top of the flotation ceU by air bubbles that adhere to them. 

Heat Pumps. Heat pumps involve the appHcation of external power to pump heat from a lower temperature to a higher temperature. Heat pumps are frequently used for space heating and are simply refrigeration cycles operated in reverse. The heat rejected in the condenser becomes the primary objective of operation. Consequently, refrigerants used for mechanical compression refrigeration have similar appHcation in heat pumps. 

Xylene Isomeri tion. The objective of C-8-aromatics processing is the conversion of the usual four-component feedstream (ethylbenzene and the three xylenes) into an isomerically pure xylene. Although the bulk of current demand is for xylene isomer for polyester fiber manufacture, significant markets for the other isomers exist. The primary problem is separation of the 8—40% ethylbenzene that is present in the usual feedstocks, a task that is compHcated by the closeness of the boiling points of ethylbenzene and -xylene. In addition, the equiUbrium concentrations of the xylenes present in the isomer separation train raffinate have to be reestabUshed to maximize the yield of the desired isomer. 

Eye and Skin Contact. Some nickel salts and aqueous solutions of these salts, eg, the sulfate and chloride, may cause a primary irritant reaction of the eye and skin. The most common effect of dermal exposure to nickel is allergic contact dermatitis. Nickel dermatitis may occur in sensitized individuals following close and prolonged contact with nickel-containing solutions or metallic objects such as jewelry, particularly pierced earrings. It is estimated that 8—15% of the female human population and 0.2—2% of the male human population is nickel-sensitized (125). 

Approximately 4500 tons of sodium hypophosphite [7681-53-0] NaH2P02, was produced in 1990. This material is used principally in electroless nickel plating of plastic objects. Of the secondary products made from primary phosphoms compounds, phosphoms oxychloride is manufactured in the largest volume. Phosphoms pentachloride and phosphoms sulfochloride are made from phosphoms trichloride. 

---