Natural commercially available

There have been several in vitro assay methods reported recently that are based on spectrophotometric, fluorometric, or amperometric means of detection. These assays were investigated using various natural, commercially available substrates or from specially designed and synthesized probes. The prerequisite for the donor substrate is a ketol moiety, and for the acceptor substrate an aldehyde function. 

The colored fraction from crude (FF grade) wood rosin decolorization does not have a generic name. The only material of this nature commercially available at the present time in the United States is the Hercules product, Vinsol. It consists of more than 50% phenolic components and about 25% resin acids and derivatives. Vinsol has a wide diversity of uses, which include emulsifiers for asphalts, tackifiers and bonding agents in adhesives, air-entrainment agents in cements, components of electric insulation, resin extenders in laminates, and foundry cores. 

It is not necessary that there be two isotopes in both the sample and the spike. One isotope in the sample needs to be measured, but the spike can have one isotope of the same element that has been produced artificially. The latter is often a long-lived radioisotope. For example, and are radioactive and all occur naturally. The radioactive isotope does not occur naturally but is made artificially by irradiation of Th with neutrons. Since it is commercially available, this last isotope is often used as a spike for isotope-dilution analysis of natural uranium materials by comparison with the most abundant isotope ( U). 

The choice of a particular mass spectrometer to perform a given task must take into account the nature of the substances to be examined, the degree of separation required for mixtures, the types of ion source and inlet systems, and the types of mass analyzer. Once these individual requirements have been defined, it is much easier to discriminate among the large number of instruments that are commercially available. Once suitable mass spectrometers have been identified, the final choice is often a case of balancing capital and running costs, reliability, ease of routine use, after-sales service, and the reputation of the manufacturer. 

Electroporation. When bacteria are exposed to an electric field a number of physical and biochemical changes occur. The bacterial membrane becomes polarized at low electric field. When the membrane potential reaches a critical value of 200—300 mV, areas of reversible local disorganization and transient breakdown occur resulting in a permeable membrane. This results in both molecular influx and efflux. The nature of the membrane disturbance is not clearly understood but bacteria, yeast, and fungi are capable of DNA uptake (see Yeasts). This method, called electroporation, has been used to transform a variety of bacterial and yeast strains that are recalcitrant to other methods (2). Apparatus for electroporation is commercially available, and constant improvements in the design are being made. 

Sometimes a skilled peifumei detects a sandalwood-musky note in authentic Bulgarian otto of rose. This note has been identified (11) as the trace iagredient, 7-methoxy-3,7-dimethyl-2-octanol [41890-92-0] (17), which has been commercially available for some time as Ossyrol (trademark of Bush, Boake, Aken Inc). This compound had never before been identified ia nature, but demonstrates how, sometimes, synthetic fragrance chemists can anticipate nature. 

Ultramarine Pigments. Ultramarines are derived from lazurite [1302-85-8] (lapis lazuli), a semiprecious stone, which was the natural source of ultramarine blue for hundreds of years. Ultramarines can be prepared in many shades. Examples of commercially significant ones ate ultramarine blue, ultramarine violet, and ultramarine pink. The ultramarine pigment having a green shade can also be prepared but it is not commercially available. The first German patent issued in 1877 was for the manufacture of ultramarine red (42). 

Fatty amines are nitrogen derivatives of fatty acids, olefins, or alcohols prepared from natural sources, fats and oils, or petrochemical raw materials. Commercially available fatty amines consist of either a mixture of carbon chains or a specific chain length from C The amines are classified as... 

Heavy Hydrocarbon-Based Partial Oxidation Processes. Two major partial oxidation processes are commercially available, the SheU process (38) and the Texaco process (39). Operating conditions in the gas generator vary from 1200°C to 1370°C and from 3100 kPa to 8270 kPa (450—1200 psig). Generally, heavy oils are the hydrocarbon feeds however, the process can also accommodate feeds from natural gas to residual oils. 

There are a vast number of quaternary ammonium compounds or quaternaries (1). Many are naturally occurring and have been found to be cmcial in biochemical reactions necessary for sustaining life. A wide range of quaternaries are also produced synthetically and are commercially available. Over 204,000 metric tons of quaternary ammonium compounds are produced aimuaHy in the United States (2). These have many diverse appHcations. Most are eventually formulated and make their way to the marketplace to be sold in consumer products. AppHcations range from cosmetics (qv) to hair preparations (qv) to clothes softeners, sanitizers for eating utensils, and asphalt emulsions. 

Synthesis and Manufacture of Amines. The chemical and busiaess segments of amines (qv) and quaternaries are so closely linked that it is difficult to consider these separately. The majority of commercially produced amines origiaate from three amine raw materials natural fats and oils, a-olefins, and fatty alcohols. Most large commercial manufacturers of quaternary ammonium compounds are fully back-iategrated to at least one of these three sources of amines. The amines are then used to produce a wide array of commercially available quaternary ammonium compounds. Some iadividual quaternary ammonium compounds can be produced by more than one synthetic route. 

The processing methods for siHcone mbber are similar to those used in the natural mbber industry (59,369—371). Polymer gum stock and fillers are compounded in a dough or Banbury-type mixer. Catalysts are added and additional compounding is completed on water-cooled roU mills. For small batches, the entire process can be carried out on a two-roU mill. Heat-cured siHcone mbber is commercially available as gum stock, reinforced gum, partially filled gum, uncatalyzed compounds, dispersions, and catalyzed compounds. The latter is ready for use without additional processing. Before being used, sihcone mbber is often freshened, ie, the compound is freshly worked on a mbber mill until it is a smooth continuous sheet. The freshening process eliminates the stmcturing problems associated with polymer—filler interactions. 

Coppet(II) oxide [1317-38-0] CuO, is found in nature as the black triclinic tenorite [1317-92-6] or the cubic or tetrahedral paramelaconite [71276-37 ]. Commercially available copper(II) oxide is generally black and dense although a brown material of low bulk density can be prepared by decomposition of the carbonate or hydroxide at around 300°C, or by the hydrolysis of hot copper salt solutions with sodium hydroxide. The black product of commerce is most often prepared by evaporation of Cu(NH2)4C02 solutions (35) or by precipitation of copper(II) oxide from hot ammonia solutions by addition of sodium hydroxide. An extremely fine (10—20 nm) copper(II) oxide has been prepared for use as a precursor in superconductors (36). 

Resolution of Racemic Amines and Amino Acids. Acylases (EC3.5.1.14) are the most commonly used enzymes for the resolution of amino acids. Porcine kidney acylase (PKA) and the fungaly3.spet i//us acylase (AA) are commercially available, inexpensive, and stable. They have broad substrate specificity and hydrolyze a wide spectmm of natural and unnatural A/-acyl amino acids, with exceptionally high enantioselectivity in almost all cases. Moreover, theU enantioselectivity is exceptionally good with most substrates. A general paper on this subject has been pubUshed (106) in which the resolution of over 50 A/-acyl amino acids and analogues is described. Also reported are the stabiUties of the enzymes and the effect of different acyl groups on the rate and selectivity of enzymatic hydrolysis. Some of the substrates that are easily resolved on 10—100 g scale are presented in Figure 4 (106). Lipases are also used for the resolution of A/-acylated amino acids but the rates and optical purities are usually low (107). 

PAFC systems are commercially available from the ONSI Corporation as 200-kW stationary power sources operating on natural gas. The stack cross sec tion is 1 m- (10.8 ft"). It is about 2.5 m (8.2 ft) tall and rated for a 40,000-h life. It is cooled with water/steam in a closed loop with secondary heat exchangers. The photograph of a unit is shown in Fig. 27-66. These systems are intended for on-site power and heat generation for hospitals, hotels, and small businesses. Another apphcation, however, is as dispersed 5- to 10-MW power plants in metropolitan areas. Such units would be located at elec tric utihty distribution centers, bypassing the high-voltage transmission system. The market entiy price of the system is 3000/kW. As production volumes increase, the price is projec ted to dechne to 1000 to 1500/kW. 

Polypeptides. These are a string of a-amino acids usually with the natural 5(L) [L-cysteine is an exception and has the R absolute configuration] or sometimes "unnatural" 7f(D) configuration at the a-carbon atom. They generally have less than -100 amino acid residues. They can be naturally occurring or, because of their small size, can be synthesised chemically from the desired amino acids. Their properties can be very similar to those of small proteins. Many are commercially available, can be custom made commercially or locally with a peptide synthesiser. They are purified by HPLC and can be used without further purification. Their purity can be checked as described under proteins. 

---