Municipal Solid Wastes composition

Fig. 2 Municipal solid-waste composition by weight. (From Ref. l)...

Gidarakos, E., Havas, G. NtzamiUs, P. 2006. Municipal solid waste composition determination supporting the integrated solid waste management system in the island of Crete, Waste Management 26(6) 668-79. 

Table 16. Char and Gas Composition from Pyrolysis of Municipal Solid Waste Organics ...

Table 1. Product Composition for Municipal Solid Waste, Wt %...

Keywords Refused Derived Fuels (RDF), Dry Stabilization Process (DSP), Municipal Solid Waste (MSW), Waste composition, Waste amount, Heating value, Emission Factor (EF)... 

Dioxin-like compounds are known to be one of the most harmful persistent organic pollutants of the chlorine based compounds. Dioxins are repeatedly synthesized and decomposed by complicated mechanisms and temperature changes at different locations in municipal solid waste incineration processes and the final streams discharged are commonly exhaust gas and incineration ash. Dioxins in different discharge types and compositions of effluents could be affected by incineration conditions such as temperature, feeding and discharging methods and incinerator type [47]. 

Tables 4.4 and 4.5 show the effect of temperature on product yield and composition from the pyrolysis of mixed municipal solid waste (MSW) and bituminous coal. Other data11 show that beyond a certain temperature char yield does...

Municipal solid waste (MSW), 25 864 as biomass, 3 684 cadmium in, 4 489-490 characteristics of leachates in, 25 867t characterizing, 25 866-869 collection of, 25 869-870 composition analysis for, 27 365t ferrous scrap in, 27 411 incineration of, 25 872-873 mixed, 27 367-369 preparation of, 27 367-369 processing, 27 364-371 quantity and composition of, 27 362-364 recovery rates for, 27 364, 366-367t recycled, 27 360, 362-371 toxic chemicals in, 25 875-876 Municipal waste sludge, as biomass, 3 684 Municipal water, for aquaculture, 3 198 Municipal water softening methods,... 

States in 2001 the rate was about 2 kg (4.4 lb) per capita per day, or nearly 208 Tg (229 M short tons) per year. Table 24-4 shows that the composition of miscellaneous refuse is fairly uniform, but size and moisture variations cause major difficulties in efficient, economical disposal. The fuel value of municipal solid wastes is usually sufficient to enable self-supporting combustion, leaving only the incombustible residue and reducing by 90 percent the volume of waste consigned to landfill. The heat released by the combustion of waste can be recovered and utilized, although this is not always economically feasible. 

Biogas can be obtained from digesting the organic material of municipal solid wastes (MSW). The composition of MSW varies by the somce of waste however, in all cases the major constituents of MSW are organic in nature and the organics accoimts for more than 50% of MSW. The economic exploitation of methane is worthwhile after one year from the start of the landfill operation. 

The term municipal solid wastes (MSW) is used to describe the wide range of waste materials produced by individual, family, and community activities. The graph shows the approximate composition of the municipal solid waste found in the United States today. 

Johnson, C. A., Kaeppeh, M., Brandenberger, S., Ulrich, A. Baumann, W. 1999. Hydrological and geochemical factors affecting leachate composition in municipal solid waste incinerator bottom ash. Part II. The geochemistry of leachate from Landfill Lostorf, Switzerland. Journal of Contaminant Hydrology, 40, 239- 259. 

Ash Characteristics. The elemental ash composition of biomass waste and municipal solid waste differs dramatically from that of coal (qv). ... 

In addition to the variations in the LHC composition that occur from species to species, each species has its extractives, which include resins and waxes. These constituents are capable of interfering with cellulose hydrolysis because of their hydrophobic nature. Tannins and other highly reactive materials are constituents of some woody species. When LHC is obtained from nonwoody (herbaceous) species, the range of interfering constituents increases greatly. Sugars, starches, dextran, carotenoids, and many isoprenoids are to be found. Operators of a cellulose hydrolysis process that uses municipal solid waste as its biomass resource may experience seasonal variations in composition and chance inclusion of crankcase oil and other products that inhibit enzymes or kill yeast. 

Fig. 3 Percent homolog composition of tri- to octaCNs in source-related samples from the Great Lakes region for Halowaxes, Aroclors, and industrial fly ashes from a municipal solid waste incinerator (MSWI), a medical waste incinerator (Med Waste), a cement kiln, and an iron sintering plant [126,137,139]...

Physical Composition Information and data on the physical composition of solid wastes including (1) identification of the individual components that make up industrial and municipal solid wastes, (2) density of solid wastes, and (3) moisture content are presented below. 

Another approach for overcoming the problems posed by conventional cracking catalysts has been disclosed recently by Reverse et al. [101]. In this case, direct cracking is performed by using as catalyst a molten bed of pure metal or a metal mixture (mainly lead, zinc, tin) at a temperature of 460-550°C wherein the waste polymer is loaded inside the reactor at a certain depth. The authors point out that the products are indeed a result of the combination of both thermal and catalytic cracking. The catalyst composition may also include some acidic component such as metal silicates, metal carbonates and their mixtures. The process can be applied to pure and mixed polymers (PE, PET, PP, PVC), as well as to the plastic fraction of municipal solid wastes. 

---