Mixed solid oxide

Manganaies IV), manganites. Mixed-metal oxides containing Mn(IV). Prepared by solid state reactions. 

In the laboratory, bromine is prepared by oxidation of bromide ion the oxidation is carried out by mixing solid potassium bromide with manganese(IV) oxide and distilling with concentrated sulphuric acid ... 

Precious metals and oxides platinised titanium, platinised niobium, platinised tantalum, platinised silver, solid platinum metals, mixed metal oxide-coated titanium, titanium oxide-based ceramics. 

Nonstoichiometry is relatively common among mixed metal oxides, in which more than one metal is present. In 1986 it was discovered that certain compounds of this type showed the phenomenon of superconductivity on cooling to about 100 K, their electrical resistance drops to zero (Figure 20.9). A typical formula here is YBa2Cu30 where x varies from 6.5 to 7.2, depending on the method of preparation of the solid. 

Today, the term solid electrolyte or fast ionic conductor or, sometimes, superionic conductor is used to describe solid materials whose conductivity is wholly due to ionic displacement. Mixed conductors exhibit both ionic and electronic conductivity. Solid electrolytes range from hard, refractory materials, such as 8 mol% Y2C>3-stabilized Zr02(YSZ) or sodium fT-AbCb (NaAluOn), to soft proton-exchange polymeric membranes such as Du Pont s Nafion and include compounds that are stoichiometric (Agl), non-stoichiometric (sodium J3"-A12C>3) or doped (YSZ). The preparation, properties, and some applications of solid electrolytes have been discussed in a number of books2 5 and reviews.6,7 The main commercial application of solid electrolytes is in gas sensors.8,9 Another emerging application is in solid oxide fuel cells.4,5,1, n... 

Over the last few years, we have made a number of novel discoveries using reactive salt fluxes in the crystal growth experiment of mixed-metal oxides. The most important outcome that these salt-inclusion solids have demonstrated is the propensity for structure- directing effects of the employed salt. These hybrid solids have revealed fascinating solid-state structures ranging from nanoclusters to three-dimensional open frameworks of current interest. Solids featuring mag-... 

Laboratory, where he worked with John Longo and Allan Jacobson on the synthesis and characterization of mixed metal oxides and their application in heterogeneous catalysis. He joined the chemistry faculty of Northwestern University in 1984 where he is now Professor of Chemistry and an active member of the Center for Catalysis and Surface Science and the Materials Research Science and Engineering Center. Kenneth Poeppelmeier has published over 250 research papers and supervised approximately 40 Ph.D. students in the area of inorganic and solid state chemistry. He is a Fellow of the American Association for the Advancement of Science (AAAS) and the Japan Society for the Promotion of Science (JSPS) and has been a Lecturer for the National Science Council of Taiwan (1991), Natural Science Foundation of China (1999) and Chemistry Week in China (2004), and more recently an Institut Universitaire de France Professor (2003). 

Performance of an Anode-supported Solid Oxide Fuel Cell in a Mixed-gas Configuration... 

Double Substitution In such processes, two substitutions take place simultaneously. For example, in perovskite oxides, La may be replaced by Sr at the same time as Co is replaced by Fe to give solid solutions Lai Sr Coi yFey03 5. These materials exhibit mixed ionic and electronic conduction at high temperatures and have been used in a number of applications, including solid oxide fuel cells and oxygen separation. 

Solid mixed ionic-electronic conductors (MIECs) exhibit both ionic and electronic (electron-hole) conductivity. Naturally, in any material there are in principle nonzero electronic and ionic conductivities (a i, a,). It is customary to limit the use of the term MIEC to those materials in which a, and 0, 1 do not differ by more than two orders of magnitude. It is also customary to use the term MIEC if a, and Ogi are not too low (o, a i 10 S/cm). Obviously, there are no strict rules. There are processes where the minority carriers play an important role despite the fact that 0,70 1 exceeds those limits and a, aj,i< 10 S/cm. In MIECs, ion transport normally occurs via interstitial sites or by hopping into a vacant site or a more complex combination based on interstitial and vacant sites, and electronic (electron/hole) conductivity occurs via delocalized states in the conduction/valence band or via localized states by a thermally assisted hopping mechanism. With respect to their properties, MIECs have found wide applications in solid oxide fuel cells, batteries, smart windows, selective membranes, sensors, catalysis, and so on. 

Mixed-phase oxide pigments are manufactured by high temperature (800-1000 °C) solid state reactions of the individual oxide components in the appropriate quantities. The preparation of nickel antimony titanium yellow, for example, involves reaction of Ti02, NiO and Sb203 carried out in the presence of oxygen or other suitable oxidising agent to effect the necessary oxidation of Sb(m) to Sb(v) in the lattice. 

Freshly cast lead has a bright, silvery appearance. On exposure to the atmosphere, however, lead in the surface layer combines with atmospheric oxygen and carbon dioxide to form a dark, stable gray coating of mixed lead oxide and basic lead carbonate. This layer usually protects the metal from further oxidation and corrosion (see Fig. 38). Protected by a weathered surface layer, solid lead is stable to further corrosion. Lead is also very ductile and soft, being the softest metal known in antiquity. It is mainly because of these properties that lead was widely used for building, to make pipes and roofs, and in naval construction, for example. Solid lead flows, albeit very... 

Fig. 3. Oxygen transport in solids. 02 is dissociated and ionized at the reduction interface to give O2 ions, which are transferred across the solid to the oxidation interface, at which they lose the electrons to return back to 02 molecules that are released to the stream, (a) In the solid electrolyte cell based on a classical solid electrolyte, the ionic oxygen transport requires electrodes and external circuitry to transfer the electrons from the oxidation interface to the reduction interface (b) in the mixed conducting oxide membrane, the ionic oxygen transport does not require electrodes and external circuitry to transfer the electrons to the reduction interface from the oxidation interface, because the mixed conductor oxide provides high conductivities for both oxygen ions and electrons.

The applications of IR spectroscopy in catalysis are many. For example, IR can be used to directly characterize the catalysts themselves. This is often done in the study of zeolites, metal oxides, and heteropolyacids, among other catalysts [77,78], To exemplify this type of application, Figure 1.11 displays transmission IR spectra for a number of Co Mo O (0 < x < 1) mixed metal oxides with various compositions [79]. In this study, a clear distinction could be made between pure Mo03, with its characteristic IR peaks at 993, 863, 820, and 563 cm-1, and the Mo04 tetrahedral units in the CoMo04 solid solutions formed upon Co304 incorporation, with its new bands at 946 and 662 cm-1. These properties could be correlated with the activity of the catalysts toward carburization and hy-drodenitrogenation reactions. 

How can we be sure that the U +(Q2-) complex in a mixed metal oxide is present as the UO octahedron This can be done by studying solid solution series between tungstates (tellurates, etc.) and uranates which are isomorphous and whose crystal structure is known. Illustrative examples are solid solution series with ordered perovskite structure A2BWi aUa 06 and A2BTei-a Ua 06 91). Here A and B are alkahne-earth ions. The hexavalent ions occupy octahedral positions as can be shown by infrared and Raman analysis 92, 93). Usually no accurate determinations of the crystallographic anion parameters are available, because this can only be done by neutron diffraction [see however Ref. (P4)]. Vibrational spectroscopy is then a simple tool to determine the site symmetry of the uranate complex in the lattice, if these groups do not have oxygen ions in common. In the perovskite structure this requirement is fulfilled. 

It can be expected that solid bases could be successful for commercializing the alkylation of toluene with methanol as a route to styrene, or for selective alkene coupling. There is no doubt that achieving success in several important commercial processes will boost the field of solid base catalysis. Because it appears to be difficult to achieve superbasic organic resins, much more attention should be paid to enhancement of the base strengths of solid superbases. Further work should be done on supported alkali metals and mixed metal oxides. Development of new solid superbases will be improved by increasing our understanding of how alkali metal clusters (302-304) interact with supports and become stabilized. 

For mixed metal oxides obtained from their hydroxide or carbonate precursors after calcination, it is generally difficult to determine whether the as-prepared precursor is a single-phase or multiphase solid solution [35]. Non-aqueous solvents appear superior for achieving two dissimilar metal oxides such as MM Oz or MM 04 precipitates such reactions cannot be carried out simultaneously in aqueous solution due to the large variations in pH necessary to induce precipitations [41,42]. Table 6.1 summarizes some of the nanoparticulate semiconducting metal oxides and mixed metal oxides prepared via co-precipitation techniques. The general procedure of achieving metal loaded nanoparticles on an oxide support is shown in Fig.6.5. 

---