Solid bases

Surface-Based Solid-Liquid Separations Involving a Second... 

SURFACE-BASED SOLID-LIQUID SEPARATIONS INVOLVING A SECOND LIQUID PHASE... 

Programmable Logic Controller (PLC) A microcomputer-based solid-state control system which receives inputs from user-supplied control devices such as switches and sensors, implements them in a precise pattern determined by instructions stored in the PLC memory, and provides outputs for control or user-supplied devices such as relays and motor starters. 

The above discussion is generally related to IC-based solid-state relays and in most parts to microprocessor-based relays of tbe more rudimentary types. 

The low selectivity of the SPE columns currently in use can be increased with more selective sorbents such as the immunosorbents, which have been quite extensively used in SPE-LC (72). Immunoaffinity-based solid-phase extraction (lASPE) sorbents have also been used in coupled gas chromatography for determining... 

Figure 13.20 GC-FID chromatograms of an exuact obtained by (a) SPE and, (b) lASPE of 10 ml of municipal waste water, spiked with 1 p.g 1 of seven s-triazines (c) represents a blank mn from lASPE-GC-NPD of 10 ml of EIPLC water. Peak identification is as follows 1, ati azine 2, terbuthylazine 3, sebuthylazine 4, simetiyn 5, prometiyn 6, terbutiyn 7, dipropetiyn. Reprinted from Journal of Chromatography, A 830, J. Dalliige et al, On-line coupling of immunoaffinity-based solid-phase exUaction and gas chi-omatography for the determination of 5-triazines in aqueous samples , pp. 377-386, copyright 1999, with permission from Elsevier Science.

J. Dalliige, T. Hankemeier, J. J. Vreuls and U. A. Th Brinkman, On-line coupling of immunoaffinity-based solid-phase extr action and gas chr omatography for the determination of 5-triazines in aqueous samples , 7. Chromatogr. 830 377-386 (1999). 

Ffom a theoretical point of view, stacking fault energies in metals have been reliably calculated from first-principles with different electronic structure methods [4, 5, 6]. For random alloys, the Layer Korringa Kohn Rostoker method in combination with the coherent potential approximation [7] (LKKR-CPA), was shown to be reliable in the prediction of SFE in fcc-based solid solution [8, 9]. 

The tape-casting method makes possible the fabrication of films in the region of several hundred micrometers thick. The mechanical strength allows the use of such a solid electrolyte as the structural element for devices such as the high-temperature solid oxide fuel cell in which zirconia-based solid electrolytes are employed both as electrolyte and as mechanical separator of the electrodes. 

MAg4I5 (M = Rb, K) compounds are iodide-based solid electrolytes with high conductivities the structures are based on packing of I-, the ion Ag+... 

M. L. Bernard et al, CRAcadSci, Ser C, 272 (26), 2112-15 (1972) CA.75, 101675 (1971) A generalization of the previously described (Bernard et al, 1971) ablation theory (for AP) combustion to include AP-based solid propints provides satisfactory fits to the exptl data of M. Summerfield et al (1960), with reproduction of the two distinct pressure regimes observed in the combustion of AP-based powders between 0 and 100 bars. The solid binding agent is assumed to be easily pyrolyzable, with each mol producing several combustible gaseous mols, as in the case of pyrolytically degrading polymers... 

H. Schubert, ChemZtg 97 (9), 486—92 (1973) CA 80,28964 (1974) A brief historical survey of solid rocket proplnts is followed by a description of solid propint motors and of the uses of the proplnts. The compn and the process technology of two fundamentally different types of proplnts, ie, homogeneous or double-base solid proplnts and heterogeneous or composite solid proplnts, are described. Their properties are reviewed... 

The catalytic converter on a car uses a precious-metal-based, solid catalyst, usually in the form of a monolith, to convert unburned hydrocarbons and carbon monoxide to carbon dioxide. Many different reactants are converted to two products CO2 and water. 

Catalytic testings have been performed using the same rig and a conventional fixed-bed placed in the inner volume of the tubular membrane. The catalyst for isobutane dehydrogenation [9] was a Pt-based solid and sweep gas was used as indicated in Fig. 2. For propane oxidative dehydrogenation a V-Mg-0 mixed oxide [10] was used and the membrane separates oxygen and propane (the hydrocarbon being introduced in the inner part of the reactor). 

For the elimination of NOx in the exhaust gases of gasoline motors, more and more effort has been devoted to the elaboration of new catalysts, potential substitutes of Pt-Rh based solids Indeed, with such materials, the Rh/Pt ratio is higher than in the Pt-mine It is economically important, therefore, to elaborate new catalysts either without Rh or with a lower amount of Rh than the catalysts of the present day. 

The introduction of a Pt function influences weakly the behavior of the two high-temperature reduction peaks, but markedly decreases the temperature of the minor low-temperature reduction step from 700 K to 350 K (Figure 5b). These data suggest that some reduction of WOx-Zr02 species can occur during n-alkane isomerization reactions (440-500 K). These reducible W species may act as redox sites required for the conversion of H-atoms to H species on WOx-based solid acids. 

The work on carbon nitride solids is strongly related to research on diamondlike carbon (DLC) materials [5, 6]. DLC materials are thin film amorphous metastable carbon-based solids, pure or alloyed with hydrogen, which have properties similar to that of crystalline diamond (high hardness, low friction coefficient, high resistance to wear and chemical attack). This resemblance to diamond is due to the DLC structure, which is characterized by a high fraction of highly cross-linked sp -hybridized carbon atoms. To obtain this diamond-like structure... 

Recently, solid phase extraction (SPE) has been used to isolate members of this class of compounds. No solid phase support has been used exclusively and both hydrophobic- and hydrophilic-based solid phase extraction columns have been used for this assay. 

Akaji K, Kiso Y, Carpino LA. Fmoc-based solid-phase peptide synthesis using a new t-alcohol type 4-(l, l -dimethyl-l -hydroxypropyl)phenoxyace-tyl handle (DHPP)-resin (Fmoc = 9-fluorenyloxycarbonyl). J Chem Soc Chem Comm 1990 584-586. 

Another problem that is common for all membrane-based solid-state sensors is the ill-defined membrane-metal interface. A large exchange current density is required to produce a reversible interface for a stable potentiometric sensor response. One approach to improving this interface is to use conducting polymers. Conducting polymers are electroactive n-conjugated polymers with mixed ionic and electronic conductivity. They... 

Collier CP, Mattersteig G, Wong EW, Beverly K, Sampaio J, Raymo FM, Stoddart JF, Heath JR (2000) A [2]catenane-based solid-state electronically reconfigurable switch. Science 289 1172-1175... 

Inaba, H. Tagawa, H. 1996. Ceria-based solid electrolytes. Solid State Ionics 83 1-16. 

---