Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Methyl, alcohol butan

Synonyms AI3-15288 C-07328 EINECS 204-663-5 FEMA No. 2057 Fermentation amyl alcohol Fusel oil IP3 l-Hydroxy-3-methylbutane Isoamylol Isobutyl carbinol Isopentanol Isopentyl alcohol Methyl-3-butan-l-ol 2-Methyl-4-butanol 2-Methylbutan-4-ol 3-Methylbutanol 3-Methylbutan-l-ol 3-Methyl-l-butanol NSC 1029 Primary isoamyl alcohol Primary isobutyl alcohol UN 1105. [Pg.668]

Because of their very similar boiling points and azeotrope formation, the components of the C4 fraction cannot be separated by distillation. Instead, other physical and chemical methods must be used. 1,3-Butadiene is recovered by complex formation or by extractive distillation.143-146 Since the reactivity of isobutylene is higher than that of n-butenes, it is separated next by chemical transformations. It is converted with water or methyl alcohol to form, respectively, tert-butyl alcohol and tert-butyl methyl ether, or by oligomerization and polymerization. The remaining n-butenes may be isomerized to yield additional isobutylene. Alternatively, 1-butene in the butadiene-free C4 fraction is isomerized to 2-butenes. The difference between the boiling points of 2-butenes and isobutylene is sufficient to separate them by distillation. n-Butenes and butane may also be separated by extractive distillation.147... [Pg.46]

The reaction for making methyl-r-butyl ether proceeds quickly and highly selectively by reacting a mixed butene-butane fraction with methyl alcohol in the liquid phase on a fixed bed of an acidic ion-exchange resin catalyst (Fig. 1). [Pg.331]

Ruthenium supported on oxides is a catalyst of various reactions. It is active in methanation reactions [e.g. 1, 2, 3], in Fischer-Tropsch synthesis [e.g. 4, 5, 6], in CO oxidation [7, 8], in the synthesis of methyl alcohol [9], 1" the redu ction of NO to nitrogen CIO] and in hydrogenolysis of ethane [11] and of butane [12]. Ru supported on carbon is supposed to replace the iron in ammonia synthesis [13]. Lately ruthenium supported on oxides is intensively investigated as a potential... [Pg.514]

Sodium methoxide (0.206 mol) was suspended in 130 ml methyl alcohol and isoamyl nitrite (0.206 mol) and l-(4-methylsulfanyl-phenyl)-butan- 1-one dissolved 70 ml THF added. The solution was stirred at ambient temperature 2 days, eoncentrated, then neutralized with HO Ac. The mixture was extracted with EtOAc, washed, dried, purified by chromatography on silica using EtOAc/hexane, 15 85, and the product isolated. H-NMR data supplied. [Pg.478]

Aldehydes, especially the longer chain saturated and branched chain aldehydes (i.e., propanal, butanal, 2-methyl-1-propanal, 2-methyl-1-butanal, and 3-methyl-1-butanal) are also intermediates in the formation of fusel oils. These pathways involve anabolic metabolism of sugars or transamination of amino acids. During ethanol fermentation, the aldehydes may be reduced to the corresponding alcohols by ADH enzymes and excreted into the media. Herraiz et al. (19) found that longer chain aldehydes were not as readily reduced and excreted by the yeast, e.g., 35% reduction was observed for pentanal compared to 3% reduction for decanal. [Pg.168]

A second very important use of petroleum is in the manufacture of plastics and other chemicals. The number of chemical compounds obtained from petroleum and used as raw materials in chemical reactions is almost endless. It includes compounds such as methane, ethane, propane, butane, ethene (ethylene), propene (propylene), butene (butylene), benzene, methanol (methyl alcohol), ethanol (ethyl alcohol), phenol, xylene, naphthalene, and anthracene, to mention only a few. [Pg.556]

This method is used to determine styrene and ethyl benzene in polystyrene. In their second method, Pfab and Noffz dissolve the polymer in methylene dichloride containing a known amount of 1 -phenyl butane as internal standard. The polymer is then reprecipitated by the addition of excess methyl alcohol. The filtrate is chromatographed as described previously, except that a flame ionisation detector is used instead of a katharometer in order to increase the overall sensitivity of the procedure. This method is capable of determining styrene monomer, ethyl benzene, cumene and xylenes. [Pg.183]

Studies on banana tissue slices have shown that valine and leucine concentrations increase about threefold following the climacteric rise in respiration [10]. Radioactive labeling studies have shown that valine and leucine are transformed into branched chain flavor compounds that are essential to banana flavor (2-methyl propyl esters and 3-methyl butyl esters, respectively). As can be seen in Figure 4.6, the initial step is deamination of the amino acid followed by decarboxylation. Various reductions and esterifications then lead to a number of volatiles that are significant to fruit flavor (acids, alcohols, and esters). Recent work has shown that amino acids play a role in apple flavor as well. For example, isoleucine is the precursor of 2-methyl butyl and 2-methyl butenyl esters in apples [24,25]. An unusual flavor compound, 2-isobutylthiazole, has been found to be important to the flavor of tomato. It is hypothesized that this compound is formed from the reaction of 3-methyl-l-butanal (from leucine) with cysteamine. [Pg.79]

ACETONE BENZENE BUTADIENE BUTANE CARBON DISULPHIDE CARBON MONOXIDE DIETHYL ETHER ETHYL ALCOHOL ETHYLENE HYDROGEN HYDROGEN SULFIDE ISOBUTANE METHANE METHYL ALCOHOL PROPANE PROPYLENE... [Pg.139]

Currently, almost all acetic acid produced commercially comes from acetaldehyde oxidation, methanol or methyl acetate carbonylation, or light hydrocarbon Hquid-phase oxidation. Comparatively small amounts are generated by butane Hquid-phase oxidation, direct ethanol oxidation, and synthesis gas. Large amounts of acetic acid are recycled industrially in the production of cellulose acetate, poly(vinyl alcohol), and aspirin and in a broad array of other... [Pg.66]

The physical piopeities of ethyl chloiide aie hsted in Table 1. At 0°C, 100 g ethyl chloride dissolve 0.07 g water and 100 g water dissolve 0.447 g ethyl chloride. The solubihty of water in ethyl chloride increases sharply with temperature to 0.36 g/100 g at 50°C. Ethyl chloride dissolves many organic substances, such as fats, oils, resins, and waxes, and it is also a solvent for sulfur and phosphoms. It is miscible with methyl and ethyl alcohols, diethyl ether, ethyl acetate, methylene chloride, chloroform, carbon tetrachloride, and benzene. Butane, ethyl nitrite, and 2-methylbutane each have been reported to form a binary azeotrope with ethyl chloride, but the accuracy of this data is uncertain (1). [Pg.1]

Fig. 5.5.15 Spatially resolved 13C DEPT spectra recorded for the competitive etherification and hydration reactions of 2-methyl-2-butene (2M2B) to 2-methoxy-2-methylbutane (tert-amyl methyl ether, TAME) and 2-methyl-butan-2-ol (tert-amyl alcohol, TAOH), respectively. The molar composition of the feed was in the ratio 2 10 1 for 2M2B methanol water. The... Fig. 5.5.15 Spatially resolved 13C DEPT spectra recorded for the competitive etherification and hydration reactions of 2-methyl-2-butene (2M2B) to 2-methoxy-2-methylbutane (tert-amyl methyl ether, TAME) and 2-methyl-butan-2-ol (tert-amyl alcohol, TAOH), respectively. The molar composition of the feed was in the ratio 2 10 1 for 2M2B methanol water. The...
Microwave spectroscopy is probably the ultimate tool to study small alcohol clusters in vacuum isolation. With the help of isotope substitution and auxiliary quantum chemical calculations, it provides structural insights and quantitative bond parameters for alcohol clusters [117, 143], The methyl rotors that are omnipresent in organic alcohols complicate the analysis, so that not many alcohol clusters have been studied with this technique and its higher-frequency variants. The studied systems include methanol dimer [143], ethanol dimer [91], butan-2-ol dimer [117], and mixed dimers such as propylene oxide with ethanol [144]. The study of alcohol monomers with intramolecular hydrogen-bond-like interactions [102, 110, 129, 145 147] must be mentioned in this context. In a broader sense, this also applies to isolated ra-alkanols, where a weak Cy H O hydrogen bond stabilizes certain conformations [69,102]. Microwave techniques can also be used to unravel the information contained in the IR spectrum of clusters with high sensitivity [148], Furthermore, high-resolution UV spectroscopy can provide accurate structural information in suitable systems [149, 150] and thus complement microwave spectroscopy. [Pg.18]

A more recent raw material for plasticizer alcohols is crack-C4 as a byproduct of steamcrackers in ethene/propene production. After extraction of butadiene for use and etherification of isobutene with methanol to methyl-tertiary-butylether MTBE as an octane enhancer, a stream is left containing 1-butene, 2-butene, and butanes, so-called raffinate II. Oligomerization of the butenes yields C8 olefin mixtures ( dibutene ) as the main product and the corresponding C12 olefins as the main byproduct (tributene). They are the... [Pg.38]

Isobutylene is the most chemically reactive of the butylene isopiers. If the objective is just to get the isobutylene out of the C4 stream, it can be removed by reaction with methanol (CH3OH) to make MTBE (methyl tertiary butyl ether), by reaction with water to make TBA (tertiary butyl alcohol), by polymerization, or by solvent extraction. After that, butene-1 can be removed by selective adsorption or by distillation. That leaves the butene-2 components, together with iso- and normal butane, which are generally used as feed to an alkylation plant. [Pg.90]

There are several other routes to acetone of minor importance air oxidation of IPA reaction between IPAand acrolein for the production of allyl alcohol, with acetone as the by-product vapor phase oxidation of butane coproduction when IPA is oxidized yielding acetone and H2O2, hydrogen peroxide, the principal ingredient of bleach and by-product production from the manufacture of methyl ethyl ketone. [Pg.243]

Synonyms AI3-24189 BRN 0773649 sec-BuOH Butanol-2 Butan-2-ol 2-Butanol 5-Butanol 5ec-Butanol 2-Butyl alcohol 5-Butyl alcohol Butylene hydrate Caswell No. 119C CCS 301 EINECS 201-158-5 EINECS 240-029-8 EPA pesticide chemical code 001502 Ethylmethyl carbinol 2-Hydroxybutane Methylethyl carbinol 1-Methyl-1-propanol 1-Methylpropyl alcohol NSC 25499 SBA UN 1120. [Pg.226]

Methylenebis(oxy) ]bis(2-chloroformaldehyde), see Bis (2-chloroethoxy) methane Methylene chlorobromide, see Bromochloromethane Methylene dichloride, see Methylene chloride Methylene dimethyl ether, see Methylal Methyl 2,2-divinyl ketone, see Mesityl oxide Methylene glycol, see Formaldehyde Methylene glycol dimethyl ether, see Methylal Methylene oxide, see Formaldehyde Methyl ethanoate, see Methyl acetate (1 -Methylethenyl)benzene, see a-Methylstyrene Methyl ethoxol, see Methyl cellosolve 1-Methylethylamine, see Isopropylamine (l-Methylethyl)benzene, see Isopropylbenzene Methylethyl carbinol, see sec-Bntyl alcohol Methyl ethylene oxide, see Propylene oxide ds-Methylethyl ethylene, see cis-2-Pentene frans-Methylethyl ethylene, see frans-2-Pentene Methyl ethyl ketone, see 2-Bntanone Methylethylmethane, see Butane... [Pg.1495]

Methyl ethyl ketone is made mostly by the dehydrogenation of 5ec-butyl alcohol. A small amount is isolated as a by-product in acetic acid production by the oxidation of n-butane. [Pg.238]


See other pages where Methyl, alcohol butan is mentioned: [Pg.253]    [Pg.43]    [Pg.271]    [Pg.36]    [Pg.333]    [Pg.2599]    [Pg.572]    [Pg.435]    [Pg.417]    [Pg.3]    [Pg.117]    [Pg.523]    [Pg.513]    [Pg.29]    [Pg.725]    [Pg.190]    [Pg.173]    [Pg.603]    [Pg.302]    [Pg.56]    [Pg.279]    [Pg.293]    [Pg.146]    [Pg.204]    [Pg.1467]    [Pg.1481]    [Pg.43]    [Pg.79]    [Pg.109]    [Pg.234]   
See also in sourсe #XX -- [ Pg.88 , Pg.90 ]




SEARCH



Alcohol Methylic

Alcohols methylation

Methyl Butane

Methyl alcohol—

© 2024 chempedia.info