Methodology personnel

The contractors consider that the key to any transfer is ensuring it is properly managed. Any means of personnel transfer between marine craft must be covered by a complete risk assessment and methodology personnel must wear stipulated PPE, transfer suits and life-jackets and the transfer must be overseen by a responsible person on the jack-up barge using a crane that has a quick rope speed to move the personnel carrier quickly onto and away from the vessel as required. 

The ability of a system to meet its requirements and specifications must be demonstrated and documented before it can be accepted and fielded as a military system. Performance tests of a military detector system typically are performed by the contractor (Contractor Tests) and by the government (Government Tests). The former often are witnessed by government personnel who independently report on the methodology and results. Contractor testing is conducted at contractor facilities and at government facilities (but... 

Appropriate personnel, resources, facilities, equipment, materials, and methodologies must be available. 

Most expertise/resources for all phases of process analytical methodology development are typically available in the different functional areas of a manufacturing plant that has some laboratory capacity. But these need to be effectively organized. Thus, there is not necessarily the need for additional personnel in manufacturing to implement process analytics. However, the coordination of this existing expertise in the different areas, and the approval of the area management to redirect some resources to process analytics and not merely consider this an add-on project are critical for long-term success. Alternatively, most expertise... 

Where personnel take refuge in a building from an outdoor fire, smoke infiltration into a building may be a concern. A methodology is available to estimate this impact based on the concentration of the material present outside of the building, the building ventilation rate, and the time of exposure (SINTEF, 1997 Fees, 1996). 

All this accumulated know-how would remain of limited importance if no means were available for its use as the basis for measurements measurement and testing are required to assess compliance The laboratory infrastmcture is based on the equipment, the methodology, the premises and the enviromnental conditions and the personnel involved. 

The application of GC for use in the clinical laboratory is relatively new, due possibly to the shortage of qualified personnel to perfect and standardize GC as a routine clinical laboratory procedure. This occurred, even though highly sensitive and specific methodology of GC was available for many determinations. The methods presented in this chapter are taken from current literature and from the authors laboratory. Although the methods presented are not the only ones used in clinical chemistry, in the authors opinion they are the simplest and most reliable. 

The Naval Medical Research Institute Performance Assessment Battery (NMRI-PAB) was developed to measure the effects of a wide variety of military environments upon the technically oriented tasks of Marine and Naval personnel. The battery s methodology was based on a tii-service methodology in an attempt to standardize measurement of human performance in military environments.41 The NMRI-PAB, like the WRPAB and UTC-PAB, is a menu-driven, microcomputer-based assessment tool that comprises individual tasks. 

Sound development package in place Ranging studies completed and documented Facility qualification completed and documented Equipment qualification completed and accepted Appropriate analytical methodology implemented and validated Personnel training completed and documented Process trials and demonstrations executed and documented Change control in place and effective... 

For each nonclinical laboratory study, testing facility management shall...(c) assure that there is a quality assurance unit. (e) ensure that personnel, resources, equipment, materials, and methodologies are available as scheduled, (f) assure that personnel clearly understand the functions they are to perform, (g) assure that any deviations from these regulations reported by the quality assurance unit are communicated.. . and corrective actions are taken and documented. 

Clearly, each type of solid waste is specific and may require a particular pretreatment. Because of the complexity associated with waste characteristics, laboratory personnel must keep abreast of the scientific literature linked to this field and of the evolution of waste pre-treatment methodology. 

Customer support Quality management/standards Software/system development methodology Testing methods/verification and validation Technical personnel... 

---