Metals metallic glasses

Metals Some metal alloys can be vitrified to give metallic glasses they are classified in two classes metal-metalloid glasses such as Pd-Si, Fe-B, Fe-Ni-P-B, and metal-metal glasses such as Ni-Nb and Cu-Zn. 

Fluorine is the most electronegative and reactive of all elements. It is a pale yellow, corrosive gas, which reacts with most organic and inorganic substances. Finely divided metals, glass, ceramics, carbon, and even water burn in fluorine with a bright flame. 

Metallic dyes Metallic fibers Metallic glass Metallic pinwheels Metallic soaps... 

Some nonhygroscopic materials such as metals, glass, and plastics, have the abiUty to capture water molecules within microscopic surface crevices, thus forming an invisible, noncontinuous surface film. The density of the film increases as the relative humidity increases. Thus, relative humidity must be held below the critical point at which metals may etch or at which the electrical resistance of insulating materials is significantly decreased. 

Dispersion Processing. A commercial aqueous dispersion of Teflon PEA 335 contains more than 50 wt % PEA particles, about 5 wt % surfactants and fillers. This dispersion is processed by the same technique as for PTEE dispersion. It is used for coating various surfaces, including metal, glass, and glass fabrics. A thin layer of Teflon PEA coating can also serve as an adhesive layer for PTEE topcoat. 

Metallic Glasses. Under highly speciali2ed conditions, the crystalline stmcture of some metals and alloys can be suppressed and they form glasses. These amorphous metals can be made from transition-metal alloys, eg, nickel—2irconium, or transition or noble metals ia combination with metalloid elements, eg, alloys of palladium and siUcon or alloys of iron, phosphoms, and carbon. 

Fig. 1. Structures of (O) atoms and corresponding electron and x-ray diffraction patterns for (a) a periodic arrangement exhibiting translational symmetry where the bright dots and sharp peaks prove the periodic symmetry of the atoms by satisfying the Bragg condition, and (b) in a metallic glass where the atoms are nonperiodic and have no translational symmetry. The result of this stmcture is that the diffraction is diffuse.

Traditionally, production of metallic glasses requites rapid heat removal from the material (Fig. 2) which normally involves a combination of a cooling process that has a high heat-transfer coefficient at the interface of the Hquid and quenching medium, and a thin cross section in at least one-dimension. Besides rapid cooling, a variety of techniques are available to produce metallic glasses. Processes not dependent on rapid solidification include plastic deformation (38), mechanical alloying (7,8), and diffusional transformations (10). 

Fig. 13. Transition between ductile fracture and brittle fracture when Al QFe Gd metallic glass is aimealed at 170°C.

L. A. Davis, in Metallic Glasses, American Society for Metals, Metals Park, Ohio, 1978, p. 190. 

T. R. Anantharaman, Metallic Glasses Production, Properties and Applications, Trans. Tech. Pubhcations, Switzerland, 1983. 

---