Legs

Desprairies A., Tremblay P., and Laloy C. (1989) Secondary mineral assemblages in a volcanic sequence drilled during ODP leg 104 in the Norwegian Sea. In Proceedings of Ocean Drilling Program Scientific Reports (eds. O. Eldholm and E. Taylor), vol. 104, pp. 397-409. 

Doppler shifts indicate flows from 3 x 103 m/s to 1.5 x 104 m/s in the outer and 1 x 104m/s to 3.5 x 104 m/s in the inner leg, indicating a flow reversal in the outer leg. Such measurements can strongly help to elucidate the transport of wall materials into the divertor chamber. The atomic temperatures found in [26] are typically 1.1 eV, as expected from molecular dissociation, which is one of the main channels for carbon sources in the divertor. 

Maurer, H. H., Fritz, C. R, Toxicological Detection of Pholcodine and Its Metabolites in Urine and Hair Using Radio Immunoassay, Fluorescence Polarisation Immunoassay, Enzyme Immunoassay and Gas Chromatography-Mass Spectrometry, Int. J. Leg. Med., 104, 43,1990. 

H.H. Maurer and C.E Fritz. Toxicological detection of pholcodine and its metabolites in urine and hair using radio immunoassay, fluorescence polarisation immunoassay, enzyme immunoassay and gas chromatography-mass spectrometry. Int. ]. Leg. Med. 104, 43 6, 1990. 

Cp Ta(SPh)4 was isolated from the reaction of Cp TaCl4 with NaSPh at — 78 °C.387 The molecule has a distorted four-legged piano-stool structure with two different sets of Cp —Ta—S bond angles averaging 104.1° and 117.2°, respectively. These seem to be determined largely by electronic factors with a less important S S repulsion effect. 

The repo counterparty delivers to the reverse repo counterparty 10 million nominal of the stock, and in return receives the purchase proceeds. The clean market price of the stock is 104.60. In this example no margin has been taken so the start proceeds are equal to the market value of the stock which is 10,505,560.11. It is common for a rounded sum to be transferred on the opening leg. The repo interest is 5.75%, so the repo interest charged for the trade is... 

Kantm, R. D., Bioeogineering studies of periodic external ccnnpression as prophylaxis against deep vein thrombosis—Part I Numerical studies Part II Experimental studies on a stimulated leg, /. Biomech. Eng., 104 87-95 and 96-104,1982. 

As discussed in the previous section on injection molding, a sink mark almost always occurs in extrusion on a flat surface that is opposite to and adjoining a leg or rib, because of unbalanced heat removal or similar factors. As with injection molding, sink marks can be concealed by adding a design feature, such as a series of serrations on the area where they occur (see Fig. 11-104). 

Lemonnier, S., Goupil, C, Noudem, J.G., and Guilmeau, E. (2008) Four-leg Cao.ssSmo.osMnOa unileg thermoelectric device. /. Appl. Phys., 104, 014505. 

The crystallised tetrahromide was formed in the usual way with the portion distillitig 175 to 177 C., and these crystals, when purified to constant melting-point with acetic ether, melted at 104 to 105° C. From the physical proper leg of the several fractions it may be assumed that nearly the whole of the terpene present was lacvo-Umonene, and that the oil contained about 60 per cent, of that terpene. 

---