Opening leg

The repo counterparty delivers to the reverse repo counterparty 10 million nominal of the stock, and in return receives the purchase proceeds. The clean market price of the stock is 104.60. In this example no margin has been taken so the start proceeds are equal to the market value of the stock which is 10,505,560.11. It is common for a rounded sum to be transferred on the opening leg. The repo interest is 5.75%, so the repo interest charged for the trade is... 

Dead legs in the sample line must be discharged safely to ensure that the sample will ac tuaUy be representative of the material in the unit. Without blowing down the dead leg, samples taken will be erroneous, as they may be representative of some past operating conditions. If the location is nonroutine, the sample leg may have accumulated debris. The debris could partially or totally block the line. Opening the isolation valve to blow down the line could result in a sudden, uncontrolled release, presenting a hazard to the sample gatherer. 

If adequate flow does not occur after a reasonably deep puncture, sometimes massaging the leg downward will start the flow, sometimes merely waiting will start the flow. At the initial incision, there is a short period when the capillaries constrict. After a few minutes they relax and open up again. 

Mai heard it too, and only then went on speaking, more softly still And then he undresses too, and gets into bed. And you kiss and hold each other and he touches you all over, wherever feels good to him. And it feels good to you too, you ll see. And then when he s ready, he lies on you and you open your legs and he puts his thing in you. ... 

A tank that is vented to the atmosphere contains a liquid with a density of 0.9 g/cm3. A dip tube inserted into the top of the tank extends to a point 1 ft from the bottom of the tank. Air is bubbled slowly through the dip tube, and the air pressure in the tube is measured with a mercury (SG =13.6) manometer. One leg of the manometer is connected to the air line feeding the dip tube, and the other leg is open to the atmosphere. If the manometer reading is 5 in., what is the depth of the liquid in the tank ... 

With reference to the figure for Prob. 30, the manometer contains water as the manometer fluid and is attached to a tank that is empty and open to the atmosphere. When the tank is stationary, the water level is the same in both legs of the manometer. If the entire system is rotated about the centerline of the tank at a rate of N (rpm) ... 

In circulating fluidized beds two main attrition sources, namely the riser and the return leg, may be distinguished. Although a lot of information is available about solids flow patterns and flow structures inside the circulating fluidized bed risers, no systematic investigations have been found in the open literature on the influence of riser geometry and flow conditions inside the riser on attrition. With respect to attrition occurring in the return leg, the work of Zenz and Kelleher (1980) on attrition due to free fall may be mentioned (cf. Sec. 4.3). 

Note that inversion of one leg of the open Td form through the opposite trigonal face produces the more cramped C3V form. 

Angioplasty may take between 30 minutes to 3 hours to complete. It begins with a distinctive dye that is injected into the bloodstream. A thin catheter is then inserted into the femoral artery of the leg, near the groin. The doctor monitors the path of the dye using x-rays. He moves the tube through the heart and into the plaque-filled artery. He inflates the balloon, creating more space, deflates the balloon, and removes the tube. It is important to note that the plaque has not been removed it has just been compressed against the sides of the artery. Sometimes, a stent may be implanted, a tiny tube of stainless steel that is expandable when necessary. Its function is to keep the artery open. 

---