Laminates binders

Uses Epoxy for floor topping and repair compds., general purpose adhesives, laminating binders, casting and encapsulation compds., solventless or high-solids/low-VOC coatings Properties Gardner 1 color dens. 9.56 Ib/gal vise. 2180 cps EPON Resin 58134 [Resolution Perf. Prods.)... 

Uses Adhesives (wooden doors, panels, laminates) binder emulsifier skin conditioner, bulking agent in cosmetics dietary supplement for foods, nutritional beverages, powd. diet supplements, pharmaceuticals Features Milky appearance, smooth feel in the mouth... 

Phenol—formaldehyde resins are used as mol ding compounds (see Phenolic resins). Their thermal and electrical properties allow use in electrical, automotive, and kitchen parts. Other uses for phenol—formaldehyde resins include phenoHc foam insulation, foundry mold binders, decorative and industrial laminates, and binders for insulating materials. 

In other areas, POD has been used to improve the wear resistance of a mbber latex binder by incorporation of 25% of Oksalon fibers. Heat-resistant laminate films, made by coating a polyester film with POD, have been used as electrical insulators and show good resistance to abrasion and are capable of 126% elongation. In some instances, thin sheets of PODs have been used as mold release agents. For this appHcation a resin is placed between the two sheets of POD, which is then pressed in a mold, and the sheets simply peel off from the object and mold after the resin has cured. POD-based membranes exhibit salt rejection properties and hence find potential as reverse osmosis membranes in the purification of seawater. PODs have also been used in the manufacturing of electrophotographic plates as binders between the toner and plate. These improved binders produce sharper images than were possible before. 

Flame-Resistant Grades. Grade FR-1, paper-based laminates with a phenoHc resin binder, are similar in all properties to Grade XP, but so formulated to have at least a UL94 V-1 classification when tested according to UL94. 

Composite-Based Laminates. Grade CEM-1 are laminates with continuous-filament glass cloth surfaces and a cellulose core, all with a flame-resistant epoxy resin binder. With good punching practice, sheets up to and including 2.4 mm (0.094 in.) in thickness may be punched at temperatures not less than 23°C (73°F). These laminates meet UL94 V-0 when tested in accordance with UL94. 

Water-borne adhesives are preferred because of restrictions on the use of solvents. Low viscosity prepolymers are emulsified in water, followed by chain extension with water-soluble glycols or diamines. As cross-linker PMDI can be used, which has a shelf life of 5 to 6 h in water. Water-borne polyurethane coatings are used for vacuum forming of PVC sheeting to ABS shells in automotive interior door panels, for the lamination of ABS/PVC film to treated polypropylene foam for use in automotive instmment panels, as metal primers for steering wheels, in flexible packaging lamination, as shoe sole adhesive, and as tie coats for polyurethane-coated fabrics. PMDI is also used as a binder for reconstituted wood products and as a foundry core binder. 

Vinylidene Chloride Copolymer Latex. Vinyhdene chloride polymers are often made in emulsion, but usuaUy are isolated, dried, and used as conventional resins. Stable latices have been prepared and can be used direcdy for coatings (171—176). The principal apphcations for these materials are as barrier coatings on paper products and, more recently, on plastic films. The heat-seal characteristics of VDC copolymer coatings are equaUy valuable in many apphcations. They are also used as binders for paints and nonwoven fabrics (177). The use of special VDC copolymer latices for barrier laminating adhesives is growing, and the use of vinyhdene chloride copolymers in flame-resistant carpet backing is weU known (178—181). VDC latices can also be used to coat poly(ethylene terephthalate) (PET) bottles to retain carbon dioxide (182). 

Phenohc/adhesives adhesives / sealants / gaskets abrasives and break pad binders printed circuit boards stmctural composites /laminates Metal/glass binders metal oxide binders retroreflective coatings glass optical coatings Hard copy printing inks toners... 

This low viscosity resin permits cure at low (70°C) temperatures and rapidly develops excellent elevated temperature properties. Used to increase heat resistance and cure speed of bisphenol A epoxy resins, it has utihty in such diverse appHcations as adhesives, tooling compounds, and laminating systems. A moleculady distilled version is used as a binder for soHd propellants (see Explosives and propellants) and for military flares (see Pyrotechnics). Its chief uses depend on properties of low viscosity and low temperature reactivity, particularly with carboxy-terminated mbbers. 

This includes wire enamels on a base of polyvinyl formal, polyurethane or epoxy resins as well as moulding powder plastics on phenol-formaldehyde and similar binders, with cellulose fillers, laminated plastics on paper and cotton cloth base, triacetate cellulose films, films and fibres of polyethylene terephthalate. 

The thermosetting materials are said to be initially linear but are cross-linked by heating in air to a temperature of at least 345°C. It is claimed that they have a useful working range up to 315°C. The materials may be used in compression mouldings powders, as the binder resin in glass cloth laminates and as the polymer base in heat-resistant metal coatings. 

A number of different binder materials are in use for chopped strand mat and include starch, polyvinyl acetate and polyesters. The binder used depends on the end use of the laminate and the method of fabrication. 

The furan or furane resins mainly find use because of their excellent chemical and heat resistance. In the past they have mainly been used in applications peripheral to the plastics industry such as foundry resins, for chemically resistant cements and for binders. Recent developments have facilitated their use in laminates for chemical plant. 

Phenolic resins are adaptable to many applieations. The list is very long, however, the major uses are wood binders, glass insulation binders, molding compounds, laminates, foundry binders, coatings, friction linings, abrasives, and oil well propants [59-66]. They have found their way into a number of new, high technology uses such as rocket motor wear parts, military armor, sports equipment. 

Numerous multiphase composite materials exhibit more than one characteristic of the various classes, fibrous, laminated, or particulate composite materials, just discussed. For example, reinforced concrete is both particulate (because the concrete is composed of gravel in a cement-paste binder) and fibrous (because of the steel reinforcement). 

Polymeric binder can be added to the network either as an aqueous latex dispersion or as a solution that should be dried prior to lamination in this process. In either case, the polymer should form a film and join adjacent fibers together and thus improve the stress transfer characteristics of the fibrous network. Provided that the proper film forming conditions are available, the property profile of the bonded network is determined to a significant degree by the properties of the polymeric binder at the temperature of use [20,22]. For example, if a softer type of product is desired, a binder with a relatively low glass transition temperature Tg) is often chosen. 

---