Iron nitrate, reaction with sodium

In contrast to the reaction with lithium amide, the sodium amide suspension immediately settles out after stopping the stirring and the supernatant ammonia has a grey or black colour, due to colloidal iron. In some cases it took a long time before all of the sodium had been converted (note 4). A further 0.1 g of iron(III) nitrate was then added to accelerate the reaction and some liquid ammonia was introduced to compensate for the losses due to evaporation. 

Nitric acid reacts with all metals except gold, iridium, platinum, rhodium, tantalum, titanium, and certain alloys. It reacts violentiy with sodium and potassium to produce nitrogen. Most metals are converted iato nitrates arsenic, antimony, and tin form oxides. Chrome, iron, and aluminum readily dissolve ia dilute nitric acid but with concentrated acid form a metal oxide layer that passivates the metal, ie, prevents further reaction. 

Water. The character of the water has a great influence on the character of the beer and the hardness of water (alkalinity) manifests itself by the extent of its reaction with the weak acids of the mash. Certain ions are harm fill to brewing nitrates slow down fermentation, iron destroys the colloidal stabihty of beer, and calcium ions give beer a purer flavor than magnesium or sodium ions (Table 7). 

Discussion. Potassium may be precipitated with excess of sodium tetraphenyl-borate solution as potassium tetraphenylborate. The excess of reagent is determined by titration with mercury(II) nitrate solution. The indicator consists of a mixture of iron(III) nitrate and dilute sodium thiocyanate solution. The end-point is revealed by the decolorisation of the iron(III)-thiocyanate complex due to the formation of the colourless mercury(II) thiocyanate. The reaction between mercury( II) nitrate and sodium tetraphenylborate under the experimental conditions used is not quite stoichiometric hence it is necessary to determine the volume in mL of Hg(N03)2 solution equivalent to 1 mL of a NaB(C6H5)4 solution. Halides must be absent. 

Some reactions of 2,2 -bipyridine /V-oxides have been reported. The l,T-dioxide is nitrated readily to 4,4 -dinitro-2,2 -bipyridine 1,T-dioxide. ° ° °" 2,2 -Bipyridine 1-oxide is also nitrated in the 4 position. The nitro groups in 4,4 -dinitro-2,2 -bipyridine l,T-dioxide are reactive, being replaced by chlorine with concentrated hydrochloric acid," by bromine with acetyl bromide, by hydroxyl with dilute sulfuric acid, and by alkoxy groups with sodium alkoxides. Some of the dialkoxy derivatives are useful catalysts for the oxidation of aromatic compounds. The dinitro dioxide is deoxygenated to 4,4 -dinitro-2,2 -bipyridine with phosphorus trichloride in chloroform, and other substituted l,T-dioxides behave similarly, but with phosphorus trichloride alone, 4,4 -dichloro-2,2 -bipyridine results. The dinitro dioxide is reduced by iron powder in acetic acid to 4,4 -diamino-2,2 -bipyridine, whereas 4,4 -dichloro-2,2 -bipyridine l,T-dioxide is converted to its 4,4 -diamino analogs with amines. Related reactions have been described. ... 

Experiments with sodium nitrate showed rapid reduction by Fe°, with nitrite as an intermediate and ammonia as final product. Iron acts as an electron donor and the reduction is coupled with metal corrosion (Equation 13.9). The reduction reaction in the model system was found to proceed in two sequential steps (Equation 13.30 and Equation 13.31), and the overall... 

Iron(n) salts mediated the coupling of trialkylboranes with KSGN to give RSCN via a radical process.553,554 Stereochemically pure ( )-l-thiocyanato-alkenes or ( )-l-azide-alkenes were obtained from alkynes when hydro-boration with disiamylborane was followed by reaction with potassium thiocyanate or sodium azide in the presence of copper(n) nitrate, copper(n) acetate, and small amount of water in polar aprotic solvent (Equation (116)).555... 

As with other metals, it becomes more reactive as it is more finely divided. Ultrafine iron powder is pyrophoric and potentially explosive. Explosive or violent reaction with ammonium nitrate + heat, ammonium peroxodisulfate, chloric acid, chlorine trifluoride, chloroformamidinium nitrate, bromine pentafluoride + heat (with iron powder), air + oil (with iron dust), sodium... 

Fe-Cu-Na catalysts were prepared by coprecipitation from the iron and copper nitrates with sodium hydroxide. Sodium contents were controlled by washing the precipitates. The composite catalysts were obtained by physical mixing of equal amounts of Fe-Cu-Na oxides and zeolites. After reducing the samples in a flow of 10% H2/N2 for 6 h at 350°C, the catalysts were kept at 250°C in a flow of reaction gas under 20 atm. The reactants and products were analyzed with an online gas chromatograph system. The XRD powder patterns of the catalysts before and after the reaction were obtained with C xKa radiation at 40 kV and 30 mA on a RIGAKU X-ray diffractometer. 

---