Iodid-Ion

The Landolt reaction (iodate + reductant) is prototypical of an autocatalytic clock reaction. During the induction period, the absence of the feedback species (Irere iodide ion, assumed to have virtually zero initial concentration and fomred from the reactant iodate only via very slow initiation steps) causes the reaction mixture to become kinetically frozen . There is reaction, but the intemiediate species evolve on concentration scales many orders of magnitude less than those of the reactant. The induction period depends on the initial concentrations of the major reactants in a maimer predicted by integrating the overall rate cubic autocatalytic rate law, given in section A3.14.1.1. 

The reaction involving chlorite and iodide ions in the presence of malonic acid, the CIMA reaction, is another that supports oscillatory behaviour in a batch system (the chlorite-iodide reaction being a classic clock system the CIMA system also shows reaction-diffusion wave behaviour similar to the BZ reaction, see section A3.14.4). The initial reactants, chlorite and iodide are rapidly consumed, producing CIO2 and I2 which subsequently play the role of reactants . If the system is assembled from these species initially, we have the CDIMA reaction. The chemistry of this oscillator is driven by the following overall processes, with the empirical rate laws as given ... 

The adherence of mercury to glass, i.e. tailing in presence of ozone, is probably due to the formation of an oxide. The oxidation of the iodide ion to iodine in solution is used to determine ozone quantitatively. 

Iodide ions are oxidised to iodine in acid solution ... 

An important reason for low coordination of iodide ions is that high coordination implies a high oxidation state of the central atom, which often (but not always) means high oxidising power— and this means oxidation of the easily oxidised iodide ligands. Thus the nonexistence of, for example, phosphorus(V) pentaiodide is to be explained by the oxidation of the iodide ligands and reduction of phosphorus to the -(-3 state, giving only PI3, not PI5. 

The presence of chloric(I) acid makes the properties of chlorine water different from those of gaseous chlorine, just as aqueous sulphur dioxide is very different from the gas. Chloric(I) acid is a strong oxidising agent, and in acid solution will even oxidise sulphur to sulphuric acid however, the concentration of free chloric(I) acid in chlorine water is often low and oxidation reactions are not always complete. Nevertheless when chlorine bleaches moist litmus, it is the chloric(I) acid which is formed that produces the bleaching. The reaction of chlorine gas with aqueous bromide or iodide ions which causes displacement of bromine or iodine (see below) may also involve the reaction... 

Chlorine has a lower electrode potential and electronegativity than fluorine but will displace bromine and iodine from aqueous solutions of bromide and iodide ions respectively ... 

Iodine has the lowest standard electrode potential of any of the common halogens (E = +0.54 V) and is consequently the least powerful oxidising agent. Indeed, the iodide ion can be oxidised to iodine by many reagents including air which will oxidise an acidified solution of iodide ions. However, iodine will oxidise arsenate(lll) to arsenate(V) in alkaline solution (the presence of sodium carbonate makes the solution sufficiently alkaline) but the reaction is reversible, for example by removal of iodine. 

Chloric(III) acid is a fairly weak acid, and is an oxidising agent, for example it oxidises aqueous iodide ion to iodine. Sodium chlorate(III) (prepared as above) is used commercially as a mild bleaching agent it bleaches many natural and synthetic fibres without degrading them, and will also bleach, for example, oils, varnishes and beeswax. 

The dichromate ion oxidises iron(II) to iron(III), sulphite to sulphate ion, iodide ion to iodine and arsenic(III) to arsenic(V) (arsenate). Reduction of dichromate by sulphite can be used to prepare chrome alum, since, if sulphur dioxide is passed into potassium dichromate acidified with sulphuric acid, potassium and chromium(III) ions formed are in the correct ratio to form the alum, which appears on crystallisation ... 

In the presence of excess iodide ions, copper(II) salts produce the white insoluble copper(I) iodide and free iodine, because copper(II) oxidises iodide under these conditions. The redox potential for the half-reaction ... 

Mercuryill) iodide, Hglj, is coloured either red or yellow, and is precipitated (yellow, turning red) by adding the stoichiometric amount of iodide ion to a solution containing mercury(II) ... 

Principle. An organic compound which contains chlorine is mixed with sodium peroxide and ignited in a closed metal bomb. The chlorine is thus converted to sodium chloride, and after acidification the chloride is estimated by the Volhard volumetric method. Bromine and iodine, when constituents of organic compounds similarly treated, are converted largely into sodium bromate and iodate respectively these ions are therefore subsequently reduced by hydrazine to bromide and iodide ions, and estimated as before. 

It consists in treating a solution of sodium iodide in pure acetone with the organic compound. The reaction is probably of the S 2 type involving a bimolecular attack of the iodide ion upon the carbon atom carrying the chlorine or bromine the order of reactivities of halides is primary > secondary > tertiary and Br > Cl. 

Iodide ion (I ) Alkyl chlorides and bromides are converted to alkyl iodides by treatment with sodium iodide in acetone Nal is soluble in acetone but NaCI and NaBr are insoluble and crystallize from the reaction mixture making the reac tion irreversible... 

Iodide ion Alkyl chloride Alkyl iodide Chloride or... 

Reaction of aryl diazonium salts with iodide ion (Section 22 17) Adding po tassium iodide to a solution of an aryl diazonium ion leads to the formation of an aryl iodide... 

Oxidation. Hydrogen peroxide is a strong oxidant. Most of its uses and those of its derivatives depend on this property. Hydrogen peroxide oxidizes a wide variety of organic and inorganic compounds, ranging from iodide ions to the various color bodies of unknown stmcture in ceUulosic fibers. The rate of these reactions may be quite slow or so fast that the reaction occurs on a reactive shock wave. The mechanisms of these reactions are varied and dependent on the reductive substrate, the reaction environment, and catalysis. Specific reactions are discussed in a number of general and other references (4,5,32—35). 

Iodide ion, a moderately effective reducing agent, is used extensively for the deterrnination of oxidants. In such appHcations, the iodine Hberated by reaction between the analyte and the unmeasured excess of potassium iodide is ordinarily titrated with a standard solution of sodium thiosulfate. The reaction is as foHows ... 

A poly( -vinyl-2-pyrroHdinone)-iodine complex [25655-41-8] (PVP-iodine), has been used extensively in hospitals and elsewhere because of its germicidal, bactericidal, fungicidal, and generally disinfecting properties (150). It is sold as a solution that contains about 10% available, or active, iodine and about 5% inactive iodine, in the form of iodide ion (see Disinfectants and antiseptics Industrial antimicrobial agents). 

Diacyl peroxides have been reduced with a variety of reduciag agents, eg, lithium aluminum hydride, sulfides, phosphites, phosphines, and haUde ions (187). Hahdes yield carboxyUc acid salts (RO) gives acid anhydrides. With iodide ion and certain trivalent phosphoms compounds, the reductions are sufftcientiy quantitative for analytical purposes. 

The most commonly used reducing agent is iodide ion ... 

There are many colorimetric methods used for trace analysis of peroxides using reagents such as ferrous ion, leuco base of methylene blue, yy -diphenylcarbohydrazide, titanium(IV), iodide ion, and Ai,A7-dimethyl- -phenylenediamine. The latter two are the most commonly used reagents... 

Silver Iodide. Silver iodide, Agl, precipitates as a yellow soHd when iodide ion is added to a solution of silver nitrate. It dissolves in the presence of excess iodide ion, forming an Agl2 complex however, silver iodide is only slightly soluble in ammonia and dissolves slowly in thiosulfate and cyanide solutions. 

Iodide and Other Inorganic Anions. When large doses of iodide ion are administered, a transient inhibition of synthesis and release of the thyroid hormones is brought about by the so-called Wolff-Chaikoff effect. 

The selective uptake of iodide ion by the thyroid gland is the basis of radioiodine treatment in hyperthyroidism, mainly with although various other radioactive isotopes ate also used (40,41). With a half-life of eight days, the decay of this isotope produces high energy P-particles which cause selective destmction within a 2 mm sphere of their origin. The y-rays also emitted are not absorbed by the thyroid tissue and are employed for external scanning. 

Impurities in bromine may be deterrnined quantitatively (54). Weighing the residue after evaporation of a bromine sample yields the total nonvolatile matter. After removing the bromine, chloride ion may be deterrnined by titration with mercuric nitrate, and iodide ion by titration with thiosulfate water and organic compounds may be detected by infrared spectroscopy sulfur may be deterrnined turbidimetricaHy as barium sulfate and heavy metals may be deterrnined colorimetricaHy after conversion to sulfides. 

With substances that give up an electron more readily than aromatic hydrocarbons, such as potassium, nickel carbonyl, cyanide ion, or iodide ion, complete transfer of an electron occurs and the TCNE anion radical is formed (11). Potassium iodide is a particulady usefiil reagent for this purpose, and merely dissolving potassium iodide in an acetonitrile solution of TCNE causes the potassium salt of the anion radical to precipitate as bronze-colored crystals. 

It resembles tetracyanoethylene in that it adds reagents such as hydrogen (31), sulfurous acid (31), and tetrahydrofuran (32) to the ends of the conjugated system of carbon atoms suffers displacement of one or two cyano groups by nucleophilic reagents such as amines (33) or sodiomalononittile (34) forms TT-complexes with aromatic compounds (35) and takes an electron from iodide ion, copper, or tertiary amines to form an anion radical (35,36). The anion radical has been isolated as salts of the formula (TCNQ) where is a metal or ammonium cation, and n = 1, 1.5, or 2. Some of these salts have... 

Iodide and thiocyanate ion are effective catalysts for inducing a related rearrangement (62AG(E)S28). This reaction can be envisioned as proceeding by nucleophilic attack on the lesser substituted aziridinyl carbon atom by iodide ion to give an iodoethyl intermediate such as (132) which is subsequently converted to the final product. 

S-Alkylthiiranium salts, e.g. (46), may be desulfurized by fluoride, chloride, bromide or iodide ions (Scheme 62) (78CC630). With chloride and bromide ion considerable dealkylation of (46) occurs. In salts less hindered than (46) nucleophilic attack on a ring carbon atom is common. When (46) is treated with bromide ion, only an 18% yield of alkene is obtained (compared to 100% with iodide ion), but the yield is quantitative if the methanesulfenyl bromide is removed by reaction with cyclohexene. Iodide ion has been used most generally. Sulfuranes may be intermediates, although in only one case was NMR evidence observed. Theoretical calculations favor a sulfurane structure (e.g. 17) in the gas phase, but polar solvents are likely to favor the thiiranium salt structure. 

Fluoride ion attacks the sulfur atom in 2,3-diphenylthiirene 1,1-dioxide to give ck-1,2-diphenylethylenesulfonyl fluoride (23%) and diphenylacetylene (35%). Bromide or iodide ion does not react (80JOC2604). Treatment of S-alkylthiirenium salts with chloride ion gives products of carbon attack, but the possibility of sulfur attack followed by addition of the sulfenyl chloride so produced to the alkyne has not been excluded (79MI50600). In fact the methanesulfenyl chloride formed from l-methyl-2,3-di- -butylthiirenium tetrafluoroborate has been trapped by reaction with 2-butyne. A sulfurane intermediate may be indicated by NMR experiments in liquid sulfur dioxide. 

---