Spectrometric Instrumentation

It is an advantage of electroanalysis and its apparatus that the financial investment is low in comparison, for instance, with the more instrumental spectrometric methods real disadvantages are the need to have the analyte in solution and to be familiar with the various techniques and their electrochemistry it is to be regretted that the knowledge of chemistry and the skill needed often deter workers from applying electroanalysis when this offers possibilies competitive with more instrumental methods (cf., stripping voltammetry versus atomic absorption spectrometry). 

The result of the Back-to-Basics series is an accumulation of some 50 separate but interrelated expositions of mass spectrometric principles and apparatus. Some areas of mass spectrometry, such as ion cyclotron resonance and ion trap instruments, have not been covered except for passing references. This decision has not been due to any bias by the authors or Micromass but simply reflects the large amount of writing that had to be done and the needs of the greatest proportion of users. 

In addition to the wet and optical spectrometric methods, which are often used to analyse elements present in very small proportions, there are also other techniques which can only be mentioned here. One is the method of mass spectrometry, in which the proportions of separate isotopes can be measured this can be linked to an instrument called a field-ion microscope, in which as we have seen individual atoms can be observed on a very sharp hemispherical needle tip through the mechanical action of a very intense electric field. Atoms which have been ionised and detached can then be analysed for isotopic mass. This has become a powerful device for both curiosity-driven and applied research. 

E. Bouveresse and D.L. Massart, Standardisation of near-infrared spectrometric instruments. Vib. Spectrosc., 11 (1996) 3-15. 

Instrumentation. Traditional methods of alpha and beta spectrometry instrumentation have changed little over the past decade. Alpha spectrometric methods typically rely on semi-conductor or lithium-drifted silicon detectors (Si(Li)), or more historically gridded ion chambers, and these detection systems are still widely used in various types of uranium-series nuclide measurement for health, environmental, and... 

In addition to instrumental improvements, various approaches have been used to improve the purity or geometry of sources of natural samples for gamma spectrometric measurement. For example, improvements in source preparation for " Th measurement in water and sediment samples by gamma spectrometry are discussed in Cochran and Masque (2003). It should be emphasized that one of the main advantages of gamma spectrometry is ease of use, since in many cases samples may be analyzed directly or with significantly reduced sample preparation compared to alpha, beta, or mass spectrometric techniques. 

Resonance ionization methods (RIMS) have also been explored for improving Th ionization efficiency for mass spectrometric measurement (Johnson and Fearey 1993). As shown in Figure 3, two lasers are required, a continuous resonant dye laser for resonance of thorium atoms, and a continuous UV argon laser for transition from resonance to ionization. Consequently, sophisticated laser instrumentation is required for these methods. 

Results of pyrolysis mass spectrometric analyses can be influenced by both phenotypic drift and instrument drift. Phenotypic drift can result from variations in culture growth immediately prior to analysis, and from variations during serial subculturing before analysis.125,126 However, this type of drift is not perceived as an obstacle in microbiological work because it can be largely overcome by standardizing culture conditions and by analyzing more than one sample from each culture. 

Parallel to the development of mass spectrometric instrumentation and methodologies, the improvements of separation techniques, such as gas chromatography (GC), high performance liquid chromatography (HPLC) and capillary electrophoresis (CE), and of their coupling with MS allowed the study of complex mixtures, that are generally encountered in most studies. 

For more than 30 years, the phenomenon of luminescence—originally a curiosity in the physical laboratory—has been the basis of a well-established and widely applied spectrometric branch of analytical chemistry. Specifically, chemiluminescence (CL)-based analysis is growing rapidly, offering a simple, low-cost, and sensitive means of measuring a variety of compounds. Owing to elegant new instrumentation and, especially, to new techniques, some of which are entirely new and some borrowed from other disciplines, CL and bioluminescence (BL) can now be routinely applied to solve diverse qualitative and quantitative analytical problems. 

Mass spectrometric analysis was performed with a hybrid triple quadrupole/ linear ion trap Applied Biosystem MSD Sciex 4000QTRAP (Applied Biosystems, Foster City, USA) instrument equipped with a Turbospray ESI interface. For target quantitative analyses, data acquisition was performed in SRM, recording the transitions between the precursor ion and the two most abundant fragment ions. The developed instrumental method display excellent LODs in SRM mode between 0.5 and 1.2 pg (Table 2). 

The basic instrumentation used for spectrometric measurements has already been described in the previous chapter (p. 277). Methods of excitation, monochromators and detectors used in atomic emission and absorption techniques are included in Table 8.1. Sources of radiation physically separated from the sample are required for atomic absorption, atomic fluorescence and X-ray fluorescence spectrometry (cf. molecular absorption spectrometry), whereas in flame photometry, arc/spark and plasma emission techniques, the sample is excited directly by thermal means. Diffraction gratings or prism monochromators are used for dispersion in all the techniques including X-ray fluorescence where a single crystal of appropriate lattice dimensions acts as a grating. Atomic fluorescence spectra are sufficiently simple to allow the use of an interference filter in many instances. Photomultiplier detectors are used in every technique except X-ray fluorescence where proportional counting or scintillation devices are employed. Photographic recording of a complete spectrum facilitates qualitative analysis by optical emission spectrometry, but is now rarely used. 

The basic instrumentation used for spectrometric measurements has already been described in Chapter 7 (p. 277). The natures of sources, monochromators, detectors, and sample cells required for molecular absorption techniques are summarized in Table 9.1. The principal difference between instrumentation for atomic emission and molecular absorption spectrometry is in the need for a separate source of radiation for the latter. In the infrared, visible and ultraviolet regions, white sources are used, i.e. the energy or frequency range of the source covers most or all of the relevant portion of the spectrum. In contrast, nuclear magnetic resonance spectrometers employ a narrow waveband radio-frequency transmitter, a tuned detector and no monochromator. 

The technique is currently not used as widely as UV, visible and infrared spectrometry partly due to the high cost of instrumentation. However, it is a powerful technique for the characterization of a wide range of natural products, raw materials, intermediates and manufactured items especially if used in conjunction with other spectrometric methods. Its ability to identify major molecular structural features is useful in following synthetic routes and to help establish the nature of competitive products, especially for manufacturers of polymers, paints, organic chemicals and pharmaceuticals. An important clinical application is NMR imaging where a three-dimensional picture of the whole or parts of a patient s body can be built up through the accumulation of proton spectra recorded over many different angles. The technique involves costly instrumentation but is preferable to... 

---