Methacrylate hydroxyethyl

A typical process for the preparation of an acryUc solution terpolymer of composition 27.5% 2-ethyIhexyl acrylate—41.3% methyl methacrylate—31.2% hydroxyethyl methacrylate begins with the following charges ... 

Medicine. The polymethacrylates have been used for many years in the manufacture of dentures, teeth, denture bases, and filling materials (116,117) (see Dental materials). In the orthodontics market, methacrylates have found acceptance as sealants, or pit and fissure resin sealants which are painted over teeth and act as a barrier to tooth decay. The dimensional behavior of curing bone-cement masses has been reported (118), as has the characterization of the microstmcture of a cold-cured acryUc resin (119). Polymethacrylates are used to prepare both soft and hard contact lenses (120,121). Hydrogels based on 2-hydroxyethyl methacrylate are used in soft contact lenses and other biomedical appHcations (122,123) (see Contactlenses). 

In contrast to the situation with high sohds coatings, acryhc resins are, in general, more appropriate than polyesters for water-reducible baking coatings. Acryhc copolymers using acryhc acid (2-propenoic acid) [79-10-7], (see Acrylic acid and derivatives) and 2-hydroxyethyl methacrylate as... 

Polymeric Calcium Phosphate Cements. Aqueous solutions of polymers such as poly(acryHc acid), poly(vinyl alcohol), gelatin, etc, and/or autopolymerizable monomer systems, eg, 2-hydroxyethyl methacrylate, glycerol dimethacrylate, calcium dimethacrylate, etc, have been used as Hquid vehicles (41,42,76) for the self-setting calcium phosphate cement derived from tetracalcium phosphate and dicalcium phosphate [7757-93-9J. 

Even the earliest reports discuss the use of components such as polymer syrups bearing carboxylic acid functionality as a minor component to improve adhesion [21]. Later, methacrylic acid was specifically added to adhesive compositions to increase the rate of cure [22]. Maleic acid (or dibasic acids capable of cyclic tautomerism) have also been reported to increase both cure rate and bond strength [23]. Maleic acid has also been reported to improve adhesion to polymeric substrates such as Nylon and epoxies [24]. Adducts of 2-hydroxyethyl methacrylate and various anhydrides (such as phthalic) have also been reported as acid-bearing monomers [25]. Organic acids have a specific role in the cure of some blocked organoboranes, as will be discussed later. 

The effect of Fe(II) on grafting of 2-hydroxyethyl methacrylate onto polyester fibers in the presence of benzoyl peroxide was investigated [59]. It was found that increasing the iron ion concentration decreases the graft yield. This suggest that excess Fe(ll) ions participate in the generation of free radical species and the iron ions seem to contribute to the termination and, consequently, decrease the graft yield. 

Dielectric relaxation measurements of polyethylene grafted with acrylic acid(AA), 2-hydroxyethyl methacrylate (HEMA) and their binary mixture were carried out in a trial to explore the molecular dynamics of the grafted samples [125]. Such measurements provide information about their molecular packing and interaction. It was possible to predict that the binary mixture used yields a random copolymer PE—g—P(AA/HEMA), which is greatly enriched with HEMA. This method of characterization is very interesting and is going to be developed in different polymer/monomer systems. 

The GGM-rich hemicelluloses, isolated from water-impregnated spruce chips by heat-fractionation [218], has been used as pre-polymers after modification with methacrylic functions [439]. Radical polymerization of the modified hemicelullose with 2-hydroxyethyl methacrylate in water yielded elastic, soft, transparent, and easily swollen hydrogels. 

Hoffman and his coworkers have done a lot of work on the apphcation of radiation-induced graft polymerization for medical apphcation. The hydrophilic polymers that have been used for radiation-induced grafting are Al-vinyl pyrohdone (NVP), 2-hydroxyethyl methacrylate (HEMA), acrylamide (AAm), acrylic acid (AAc), glycidyl methacrylate (GMA), ethyleneglycol dimethacrylate (EGDMA), and ethyl methacrylate (EMA) onto sihcone rubber were widely smdied. 

Interpenetrating networks (IPNs) composed of different proportions of PCL and poly-2-hydroxyethyl methacrylate (pHEMA) have... 

Davis, P. A. Nicolais, L., Ambrosio, L., and Huang, S. J., Synthesis and characterization of semi-interpenetrating polymer networks of poly(2-hydroxyethyl methacrylate) and poly(capro-lactone), Polym. Mater. Sci. Eng., 56, 536-540, 1987. 

Terminal-functionalized polymers such as macromonomers and telechelics are very important as prepolymer for construction of functional materials. Single-step functionalization of polymer terminal was achieved via lipase catalysis. Alcohols could initiate the ring-opening polymerizahon of lactones by lipase catalyst. The lipase CA-catalyzed polymerizahon of DDL in the presence of 2-hydroxyethyl methacrylate gave the methacryl-type polyester macromonomer, in which 2-hydroxyethyl methacrylate acted as initiator to introduce the methacryloyl group quanhtatively at the polymer terminal ( inihator method ).This methodology was expanded to the synthesis of oo-alkenyl- and alkynyl-type macromonomers by using 5-hexen-l-ol and 5-hexyn-l-ol as initiator, respechvely. 

A semi-interpenetrated network was obtained by bulk polymerization of 2-hydroxye-thyl methacrylate incorporated in DMF treated PET films by solvent-exchange technique, followed by treatment of films in e-lectrical discharges. Heparinization was accomplished by reacting glutaraldehyde with heparin and poly(2-hydroxyethyl methacrylate) present on the surface of modified polyester films. The immobilization of heparin was indirectly evidenced by chromatographying the silylated hydrolyza-tes of heparinized PET films and heparin, respectively. In vitro experiments demonstrated the enhanced thromboresistance of heparinized films. 

Poly(2-hydroxyethyl methacrylate) Poly(methacrylic acid)... 

Materials. 2-Hydroxyethyl methacrylate (HEMA, Aldrich Chemical Co.) and chlorotrimethylsilane (Cl-TMS) (Lancaster Synthesis Inc.) were used as received. The source and purification of the other chemicals has been described (7). 

---