Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Hydroperoxides hydrocarbons

Catalytic properties of complexes of multi-valenced metals with poly(ethylene glycol) (PEG) and polyurethane (PU) have been studied during liquid-phase oxidation processes such as the liquid-phase oxidation of hydrocarbons (phenanthrene, tetralin, cyclohexene), decomposition of hydroperoxides, hydrocarbons and decomposition of hydrogen peroxide [101 -106]. The kinetics of these reactions have been studied. The rate and selectivity of a particular reaction process depend not only on the properties... [Pg.20]

Oxidation begins with the breakdown of hydroperoxides and the formation of free radicals. These reactive peroxy radicals initiate a chain reaction that propagates the breakdown of hydroperoxides into aldehydes (qv), ketones (qv), alcohols, and hydrocarbons (qv). These breakdown products make an oxidized product organoleptically unacceptable. Antioxidants work by donating a hydrogen atom to the reactive peroxide radical, ending the chain reaction (17). [Pg.436]

One characteristic of chain reactions is that frequentiy some initiating process is required. In hydrocarbon oxidations radicals must be introduced and to be self-sustained, some source of radicals must be produced in a chain-branching step. Moreover, new radicals must be suppHed at a rate sufficient to replace those lost by chain termination. In hydrocarbon oxidation, this usually involves the hydroperoxide cycle (eqs. 1—5). [Pg.334]

Carbon-centered radicals generally react very rapidly with oxygen to generate peroxy radicals (eq. 2). The peroxy radicals can abstract hydrogen from a hydrocarbon molecule to yield a hydroperoxide and a new radical (eq. 3). This new radical can participate in reaction 2 and continue the chain. Reactions 2 and 3 are the propagation steps. Except under oxygen starved conditions, reaction 3 is rate limiting. [Pg.334]

Carbonyl compounds can be primary (from radicals or hydroperoxides) or secondary (from alcohols). Thus the picture emerges of hydrocarbon oxidations occurring through compHcated series-sequential pathways as in Figure 1, where clearly other reactions could be going on as well. All possible pathways are pursued to some extent traffic along any pathway is a function of energy requirements and relative concentrations. [Pg.336]

Organic hydroperoxides can be prepared by Hquid-phase oxidation of selected hydrocarbons in relatively high yield. Several cycHc processes for hydrogen peroxide manufacture from hydroperoxides have been patented (84,85), and others (86—88) describe the reaction of tert-huty hydroperoxide with sulfuric acid to obtain hydrogen peroxide and coproduct tert-huty alcohol or tert-huty peroxide. [Pg.477]

Reaction conditions depend on the reactants and usually involve acid or base catalysis. Examples of X include sulfate, acid sulfate, alkane- or arenesulfonate, chloride, bromide, hydroxyl, alkoxide, perchlorate, etc. RX can also be an alkyl orthoformate or alkyl carboxylate. The reaction of cycHc alkylating agents, eg, epoxides and a2iridines, with sodium or potassium salts of alkyl hydroperoxides also promotes formation of dialkyl peroxides (44,66). Olefinic alkylating agents include acycHc and cycHc olefinic hydrocarbons, vinyl and isopropenyl ethers, enamines, A[-vinylamides, vinyl sulfonates, divinyl sulfone, and a, P-unsaturated compounds, eg, methyl acrylate, mesityl oxide, acrylamide, and acrylonitrile (44,66). [Pg.109]

Hydroperoxide Process. The hydroperoxide process to propylene oxide involves the basic steps of oxidation of an organic to its hydroperoxide, epoxidation of propylene with the hydroperoxide, purification of the propylene oxide, and conversion of the coproduct alcohol to a useful product for sale. Incorporated into the process are various purification, concentration, and recycle methods to maximize product yields and minimize operating expenses. Commercially, two processes are used. The coproducts are / fZ-butanol, which is converted to methyl tert-huty ether [1634-04-4] (MTBE), and 1-phenyl ethanol, converted to styrene [100-42-5]. The coproducts are produced in a weight ratio of 3—4 1 / fZ-butanol/propylene oxide and 2.4 1 styrene/propylene oxide, respectively. These processes use isobutane (see Hydrocarbons) and ethylbenzene (qv), respectively, to produce the hydroperoxide. Other processes have been proposed based on cyclohexane where aniline is the final coproduct, or on cumene (qv) where a-methyl styrene is the final coproduct. [Pg.138]

VL sulfonation of olefins requires hydroperoxide catalyst cosdy sulfonation of olefinic hydrocarbons ... [Pg.76]

Materials that promote the decomposition of organic hydroperoxide to form stable products rather than chain-initiating free radicals are known as peroxide decomposers. Amongst the materials that function in this way may be included a number of mercaptans, sulphonic acids, zinc dialkylthiophosphate and zinc dimethyldithiocarbamate. There is also evidence that some of the phenol and aryl amine chain-breaking antioxidants may function in addition by this mechanism. In saturated hydrocarbon polymers diauryl thiodipropionate has achieved a preeminent position as a peroxide decomposer. [Pg.140]

Bateman, Gee, Barnard, and others at the British Rubber Producers Research Association [6,7] developed a free radical chain reaction mechanism to explain the autoxidation of rubber which was later extended to other polymers and hydrocarbon compounds of technological importance [8,9]. Scheme 1 gives the main steps of the free radical chain reaction process involved in polymer oxidation and highlights the important role of hydroperoxides in the autoinitiation reaction, reaction lb and Ic. For most polymers, reaction le is rate determining and hence at normal oxygen pressures, the concentration of peroxyl radical (ROO ) is maximum and termination is favoured by reactions of ROO reactions If and Ig. [Pg.105]

Oxidation of C12-C14 n-paraffms using boron trioxide catalysts was extensively studied for the production of fatty alcohols.Typical reaction conditions are 120-130°C at atmospheric pressure. ter-Butyl hydroperoxide (0.5 %) was used to initiate the reaction. The yield of the alcohols was 76.2 wt% at 30.5% conversion. Fatty acids (8.9 wt%) were also obtained. Product alcohols were essentially secondary with the same number of carbons and the same structure per molecule as the parent paraffin hydrocarbon. This shows that no cracking has occurred under the conditions used. The oxidation reaction could be represented as ... [Pg.183]

The common initiators of this class are f-alkyl derivatives, for example, t-butyl hydroperoxide (59), Aamyl hydroperoxide (60), cumene hydroperoxide (61), and a range of peroxyketals (62). Hydroperoxides formed by hydrocarbon autoxidation have also been used as initiators of polymerization. [Pg.92]

Variable valence transition metal ions, such as Co VCo and Mn /Mn are able to catalyze hydrocarbon autoxidations by increasing the rate of chain initiation. Thus, redox reactions of the metal ions with alkyl hydroperoxides produce chain initiating alkoxy and alkylperoxy radicals (Fig. 6). Interestingly, aromatic percarboxylic acids, which are key intermediates in the oxidation of methylaromatics, were shown by Jones (ref. 10) to oxidize Mn and Co, to the corresponding p-oxodimer of Mn or Co , via a heterolytic mechanism (Fig. 6). [Pg.284]

Dimethyl peroxide Diethyl peroxide Di-t-butyl-di-peroxyphthalate Difuroyl peroxide Dibenzoyl peroxide Dimeric ethylidene peroxide Dimeric acetone peroxide Dimeric cyclohexanone peroxide Diozonide of phorone Dimethyl ketone peroxide Ethyl hydroperoxide Ethylene ozonide Hydroxymethyl methyl peroxide Hydroxymethyl hydroperoxide 1-Hydroxyethyl ethyl peroxide 1 -Hydroperoxy-1 -acetoxycyclodecan-6-one Isopropyl percarbonate Isopropyl hydroperoxide Methyl ethyl ketone peroxide Methyl hydroperoxide Methyl ethyl peroxide Monoperoxy succinic acid Nonanoyl peroxide (75% hydrocarbon solution) 1-Naphthoyl peroxide Oxalic acid ester of t-butyl hydroperoxide Ozonide of maleic anhydride Phenylhydrazone hydroperoxide Polymeric butadiene peroxide Polymeric isoprene peroxide Polymeric dimethylbutadiene peroxide Polymeric peroxides of methacrylic acid esters and styrene... [Pg.163]

Retard efficiently oxidation of polymers catalysed by metal impurities. Function by chelation. Effective metal deactivators are complexing agents which have the ability to co-ordinate the vacant orbitals of transition metal ions to their maximum co-ordination number and thus inhibit co-ordination of hydroperoxides to metal ions. Main use of stabilisation against metal-catalysed oxidation is in wire and cable applications where hydrocarbon materials are in contact with metallic compounds, e.g. copper. [Pg.782]

Hydrocarbons oxidize to give a complex mixture of products which include hydroperoxides, alcohols, ketones, acids, esters, etc. (1). Polyolefins similarly can be oxidized by heat, radiation or mechano-initiated processes. The precise identification and quantification of these oxidation products are essential for the complete understanding and control of these destructive reactions. Conventional methods for the identification of oxidation products include iodome-... [Pg.376]

Secondly, the interaction of hindered amines with hydroperoxides was examined. At room temperature, using different monofunctional model hydroperoxides, a direct hydroperoxide decomposition by TMP derivatives was not seen. On the other hand, a marked inhibitory effect of certain hindered amines on the formation of hydroperoxides in the induced photooxidation of hydrocarbons was observed. Additional spectroscopic and analytical evidence is given for complex formation between TMP derivatives and tert.-butyl hydroperoxide. From these results, a possible mechanism for the reaction between hindered amines and the oxidizing species was proposed. [Pg.65]

Hydroperoxides are formed in each polymer containing aliphatic hydrocarbon chains on standing by various initiators, including light, heat, etc. This may be well detected by the non-isothermal chemiluminescence method in nitrogen. The analytical possibilities of this approach have not been fully utilized until recently [17],... [Pg.474]


See other pages where Hydroperoxides hydrocarbons is mentioned: [Pg.211]    [Pg.211]    [Pg.749]    [Pg.819]    [Pg.938]    [Pg.44]    [Pg.334]    [Pg.335]    [Pg.477]    [Pg.496]    [Pg.108]    [Pg.294]    [Pg.168]    [Pg.507]    [Pg.318]    [Pg.491]    [Pg.40]    [Pg.1684]    [Pg.467]    [Pg.133]    [Pg.243]    [Pg.18]    [Pg.35]    [Pg.275]    [Pg.83]    [Pg.398]    [Pg.463]    [Pg.464]    [Pg.493]    [Pg.195]   
See also in sourсe #XX -- [ Pg.18 , Pg.173 ]




SEARCH



Hydrocarbons from hydroperoxides

Hydrocarbons reaction with hydroperoxides

Hydroperoxides hydrocarbon-substituted

Propylene oxide Hydrocarbon hydroperoxides

© 2024 chempedia.info