Hydrochloric acid neutralization reaction

Chemical Reactivity - Reactivity with Water Reacts slowly to generate hydrogen chloride (hydrochloric acid). The reaction is not hazardous Reactivity with Common Materials Corrodes metal slowly Stability During Transport Stable Neutralizing Agents for Acids and Caustics Flush with water, rinse with sodium bicarbonate or lime solution Polymerization Not pertinent Inhibitor of Polymerization Not pertinent. 

Biotin and biotin analogs Infant formula Protein precipitation using concentrated hydrochloric acid neutralization with 6 M NaOH lipid extraction with n-hexane Precolumn Microsorb C18 (15 X 4.6 mm, 5 jam Rainin). Analytical Microsorb C18 (250 X 4.6 mm, 5 /zm Rainin). Isocratic 100 mM phosphate buffer, pH 7.0 + methanol (80 + 20, v/v). 0.4 ml/min. Postcolumn reaction system UV absorbance at 220 nm followed by streptavidin-fluorescein isothiocyanate (2.0 mg/L) knitted open tubular reaction system (10.0 m x 0.5-mm ID) at a flow rate External standardization. 184 Linear range = 0.08-1.00 fjM biotin. LoD = 0.02 /zM or 97 pg biotin at SNR = 3. Repeatability CV 3.5% for biotin in infant formula. 

Cyclophosphamide Cyclophosphamide or ifosfamide may be destroyed using alkaline hydrolysis in the presence of dimethylformamide or refluxing with hydrochloric acid, neutralizing, or reaction with sodium thiosulfate. The... 

Baking soda is a white crystalline substance. Chemists call it sodium hydrogen carbonate. It dissolves in water and gives a slightly basic solution. From a cherrrical point of view, it is siutable to neutralize gastric acid, which is mostly hydrochloric acid. The reaction is as follows ... 

An example of the enthalpy change of neutralization is from the reaction between sodium hydroxide solution and hydrochloric acid. The reaction can be described by the following thermochemical equation ... 

The aramids are formed in the low temperature reaction, -10 to 60°C, of equimolar amounts of the diacid chloride and the diamine in an amide solvent, typically dimethyl acetamide (DMAc) or A/-meth5i-2-pyrrohdinone (NMP) and usually with a small amount of an alkaU or alkaline-earth hydroxide and a metal salt, such as LiOH [1310-65-2] LiCl, Ca(OH)2 [1305-62-0] or CaCl2 added to increase the solubiUty of the polymer and neutralize the hydrochloric acid generated in the reaction. 

Anhydrous zinc chloride can be made from the reaction of the metal with chlorine or hydrogen chloride. It is usually made commercially by the reaction of aqueous hydrochloric acid with scrap zinc materials or roasted ore, ie, cmde zinc oxide. The solution is purified in various ways depending upon the impurities present. For example, iron and manganese precipitate after partial neutralization with zinc oxide or other alkah and oxidation with chlorine or sodium hypochlorite. Heavy metals are removed with zinc powder. The solution is concentrated by boiling, and hydrochloric acid is added to prevent the formation of basic chlorides. Zinc chloride is usually sold as a 47.4 wt % (sp gr 1.53) solution, but is also produced in soHd form by further evaporation until, upon cooling, an almost anhydrous salt crystallizes. The soHd is sometimes sold in fused form. 

The acid chlorides are generally more reactive than the corresponding acid anhydrides. In fact, the alcoholysis of acid chlorides is probably the best laboratory method for preparing esters. Frequentiy, basic materials are added during the course of the reaction to neutralize by-product hydrochloric acid. When the basic material is aqueous caustic, the procedure is referred to as the Schotten-Baumann procedure (73). Esterification of tertiary alcohols by acid chlorides is described in Reference 74. Esters of tertiary alcohols can also be formed through an intermediate /-butyl thioate group (75) ... 

Neutralization Acidic or basic wastewaters must be neutrahzed prior to discharge. If an industry produces both acidic and basic wastes, these wastes may be mixed together at the proper rates to obtain neutral pH levels. Equahzation basins can be used as neutralization basins. When separate chemical neutralization is required, sodium hydroxide is the easiest base material to handle in a hquid form and can be used at various concentrations for in-line neutralization with a minimum of equipment. Yet, lime remains the most widely used base for acid neutr zation. Limestone is used when reaction rates are slow and considerable time is available for reaction. Siilfuric acid is the primary acid used to neutralize high-pH wastewaters unless calcium smfate might be precipitated as a resmt of the neutralization reaction. Hydrochloric acid can be used for neutrahzation of basic wastes if sulfuric acid is not acceptable. For very weak basic waste-waters carbon dioxide can be adequate for neutralization. 

Two hundred grams of eleaned and dried crab shells (Note 1) ground to a fine powder is placed in a 2-1. beaker, and an excess of dilute (approximately 6 N) commercial hydrochloric acid is added slowly to the powdered material until no further action is evident. Much frothing occurs during the addition of the acid, and care must be exercised to avoid loss of material due to foaming over the sides of the beaker. After the reaction has subsided, the reaction mixture is allowed to stand from 4 to 6 hours to ensure complete removal of calcium carbonate. The residue is then filtered, washed with water until neutral to litmus, and dried in an oven at 50-60°. The weight of dried chitin is usually about 70 g., but with some lots of crab shells it may be as low as 40 g. 

In a 500-ml. round-bottomed flask equipped with a reflux condenser and a magnetic stirrer (Note 6) are placed 150 ml. of methanol, 150 ml. of 6N hydrochloric acid, and the total yield of 4,4 -bis(acetamido)azobenzene. The mixture is heated under reflux for 1.5 hours. The reaction mixture is cooled and the violet solid collected on a Buchner funnel (Note 7). The damp product is suspended in 500 ml. of water in a 1-1. beaker equipped with a stirrer, and the mixture is slowly neutralized by the addition of 2.5N sodium hydroxide. In the course of the neutralization, the salt dissolves and the free base separates. The 4,4 -diaminoazo-benzene is collected on a Buchner funnel, washed with water, and dried under reduced pressure. The yield of yellow product, m.p. 238-241° (dec.),is ll-12g. The over-all yield from/ -amino-acetanilide is 52-56%. 

---