Hydrocarbons, saturated, reactions with

The reductive cleavage of quaternary ammonium salts to give a tertiary amine and a hydrocarbon by reaction with sodium amalgam in hydroxylic solvents is called the Emde degradation. However, saturated hydrocarbons are not cleaved under these conditions. Grovenstein suggested that the reason for this unreactivity is due to the fact that the sodium reacts with the alcohol much faster than with the ammonium salts. However, by operating in dioxane or dioxane-alcohol mixtures, the dealkylation reaction could be accomplished. The products of the decomposition of either tetramethylammonium chloride or bromide are methane, ethylene, trimethylamine, and dimethylethylamine. 

Chakactkrisation of Unsaturatkd Aliphatic Hydrocarbons Unlike the saturated hydrocarbons, unsaturated aliphatic hydrocarbons are soluble in concentrated sulphuric acid and exhibit characteristic reactions with dUute potassium permanganate solution and with bromine. Nevertheless, no satisfactory derivatives have yet been developed for these hydrocarbons, and their characterisation must therefore be based upon a determination of their physical properties (boiling point, density and refractive index). The physical properties of a number of selected unsaturated hydrocarbons are collected in Table 111,11. 

This realization led me to study related possible intermolecular electrophilic reactions of saturated hydrocarbons, Not only protolytic reactions but also a broad scope of reactions with varied electrophiles (alkylation, formylation, nitration, halogenation, oxygenation, etc.) were found to be feasible when using snperacidic, low-nucleophilicity reaction conditions. 

Reaction with Organic Compounds. Aluminum is not attacked by saturated or unsaturated, aUphatic or aromatic hydrocarbons. Halogenated derivatives of hydrocarbons do not generally react with aluminum except in the presence of water, which leads to the forma tion of halogen acids. The chemical stabiUty of aluminum in the presence of alcohols is very good and stabiUty is excellent in the presence of aldehydes, ketones, and quinones. 

Saturated hydrocarbons such as neopentane, notbomane, and cyclooctane have been converted to the corresponding perfluoro derivatives in 10-20% yield by gas-phase reaction with fluorine gas diluted with helium at —78°C. Simple ethers can be completely fluorinated under similar conditions. Crown polyethers can be fluorinated by passing an Fa/He stream over a solid mixture of sodium fluoride and the crown ether. Liquid-phase fluorination of hydrocarbons has also been observed, but the reaction is believed to be ionic, rather than radical, in character. A variety of milder fluorination agents have been developed for synthetic purposes and will be discussed in Chapter 6 of Part B. 

The saturated hydrocarbons are relatively inert except at high temperatures. For example, sodium metal is usually stored immersed in an alkane such as kerosene (8 to 14 carbon atoms) to protect it from reaction with water or oxygen. Combustion is almost the only important chemical reaction of the alkanes. That reaction, however, makes the hydrocarbons one of the most important energy sources of our modern technology. 

A low ion pair yield of products resulting from hydride transfer reactions is also noted when the additive molecules are unsaturated. Table I indicates, however, that hydride transfer reactions between alkyl ions and olefins do occur to some extent. The reduced yield can be accounted for by the occurrence of two additional reactions between alkyl ions and unsaturated hydrocarbon molecules—namely, proton transfer and condensation reactions, both of which will be discussed later. The total reaction rate of an ion with an olefin is much higher than reaction with a saturated molecule of comparable size. For example, the propyl ion reacts with cyclopentene and cyclohexene at rates which are, respectively, 3.05 and 3.07 times greater than the rate of hydride transfer with cyclobutane. This observation can probably be accounted for by a higher collision cross-section and /or a transmission coefficient for reaction which is close to unity. 

NMHC. A large number of hydrocarbons are present in petroleum deposits, and their release during refining or use of fuels and solvents, or during the combustion of fuels, results in the presence of more than a hundred different hydrocarbons in polluted air (43,44). These unnatural hydrocarbons join the natural terpenes such as isoprene and the pinenes in their reactions with tropospheric hydroxyl radical. In saturated hydrocarbons (containing all single carbon-carbon bonds) abstraction of a hydrogen (e,g, R4) is the sole tropospheric reaction, but in unsaturated hydrocarbons HO-addition to a carbon-carbon double bond is usually the dominant reaction pathway. 

The nature of dangerous reactions involving organic chemicals depends on the saturated, unsaturated or aromatic structures of a particular compound. Saturated hydrocarbons are hardly reactive, especially when they are linear. Branched or cyclic hydrocarbons (especially polycyclic condensed ones) are more reactive, in particular as with oxidation reactions. With ethylenic or acetylenic unsaturated compounds, the products are endothermic . 

These intermediates undergo addition reactions with alkenes and aromatic compounds and insertion reactions with saturated hydrocarbons.254... 

The analysis of published data on reactions of ozone with low molecular hydrocarbons shows that double bonds react with ozone more quickly than saturated bonds (12). Ozone reacts with saturated hydrocarbons in reactions in which hydrogen abstraction s followed by re-hydridization of the carbon atom form sp to sp state (43,44) ... 

Considerable interest in the subject of C-H bond activation at transition-metal centers has developed in the past several years (2), stimulated by the observation that even saturated hydrocarbons can react with little or no activation energy under appropriate conditions. Interestingly, gas phase studies of the reactions of saturated hydrocarbons at transition-metal centers were reported as early as 1973 (3). More recently, ion cyclotron resonance and ion beam experiments have provided many examples of the activation of both C-H and C-C bonds of alkanes by transition-metal ions in the gas phase (4). These gas phase studies have provided a plethora of highly speculative reaction mechanisms. Conventional mechanistic probes, such as isotopic labeling, have served mainly to indicate the complexity of "simple" processes such as the dehydrogenation of alkanes (5). More sophisticated techniques, such as multiphoton infrared laser activation (6) and the determination of kinetic energy release distributions (7), have revealed important features of the potential energy surfaces associated with the reactions of small molecules at transition metal centers. 

Ionic liquids display good solubility for some organic compounds, typically aromatics, but poor solubility for many saturated hydrocarbons, and solubilities of gases also depend on their properties. It has therefore been possible to run chemical reactions with reactants that are more soluble in the ionic liquids than products. 

Sulfonylnitrenes are formed by thermal decomposition of sulfonyl azides. Insertion reactions occur with saturated hydrocarbons.168 169 With aromatic rings, the main products are formally insertion products, but they are believed to be formed through addition intermediates. 

Several classes of organic compounds can react with chlorine. While chlorine adds to an olefinic double bond (=C=C=) yielding addition products, reactions with aromatics and saturated hydrocarbons produce substitution products ... 

Chlorine atoms react with aromatic hydrocarbons, but only at a significant rate with those having saturated side chains from which the chlorine atom can abstract a hydrogen or unsaturated side chains to which it can add. For example, the rate constant for the Cl atom reaction with benzene is 1.3 X 10"15 enr3 molecule-1 s-1 (Shi and Bernhard, 1997). On the other hand, the rate constants for the reactions with toluene and p-xylene are 0.59 X 10-10 and 1.5 X 10-l() enr3 molecule"1 s"1, respectively (Shi and Bernhard, 1997), and that for reaction with p-cymene is 2.1 X 10"10 cm3 molecule"1 s-1 (Finlayson-Pitts et al., 1999). Hence... 

That is, it abstracts from saturated hydrocarbons and aldehydes and adds to unsaturated hydrocarbons. As discussed in Chapter 6, the reactions with aromatic hydrocarbons are generally too slow to be important in the troposphere the exceptions are particular compounds such as the cresols where the reaction is rapid. 

Alkanes undergo combustion reaction with oxygen at high temperatures to produce carbon dioxide and water. This is why alkanes are good fuels. Oxidation of saturated hydrocarbons is the basis for their use as energy sources for heat, e.g. natural gas, liquefied petroleum gas (LPG) and fuel oil, and for power, e.g. gasoline, diesel fuel and aviation fuel. 

---