High-impact polystyrene styrenic blends

Mural and co-workers [57] also optimised the mechanical properties of an rPP and recycled high impact polystyrene (rHIPS) blend at a composition of 70/30 wt%. Consequently, this composition was mixed with a styrene-ethylene-butylene-styrene (SEES) block copolymer triblock copolymer and Cloisite 20A OMMT. Using X-ray diffraction, the samples containing 3 wt% of nanoclay were found to lack the characteristic nanoclay peak, which indicated the mixed intercalated and exfoliated clay layers where the intercalated layers were further pushed toward the interphase [76]. The incorporation of a compatibiliser and nanoclay also improved the thermal stability of the PP/HIPS blend. SEES and nanoclay performed as an interfacial compatibiliser, which led to the reduction in particle size of rHIPS and the promotion of interfacial adhesion. 

One pure elastomer was included along with three elastomer formulations. The first of these (Blend 1) was a blend of elastomer with a styrenic block copolymer. The second and third of these was a ternary blend like Blend 1 with an added polystyrene component. The type of polystyrene used was a general purpose polystyrene and a high impact polystyrene for Blends 2 and 3, respectively. The pure elastomer was included to demonstrate the influence that the other conponents contained in the formulations have on shrinkage rates. 

Property Units G.P. polystyrene Medium-impact PS-SBR blend Very high impact PS-SBR blend Styrene acrylonitrile Medium impact ABS High impact ABS MBS... 

Blends of PPO with a styrenic material, usually, but not always, high-impact polystyrene. (Referred to below as Styrenic PPOs.)... 

The formation of the polyalloy results in improvement in the performance of the blends. This system is similar to the production of high-impact polystyrene (HIPS) where a rubber is dissolved in styrene monomer and then polymerized in the usual way. Even though the impact strength of the compatibilized PS-PE blend was higher than that of PS, it was much less than that of HIPS. In another study. Van Ballegooie and [55] have confirmed... 

Polystyrene (PS) The volume of expanded polystyrene produced probably exceeds the volume production of all other plastics (excluding the polyurethanes) put together. At least half the weight of polystyrene produced is in the form of high impact polystyrene (HIPS)—a complex blend containing styrene-butadiene rubber or polybutadiene. 

Polycarbonate is blended with a number of polymers including PET, PBT, acrylonitrile-butadiene-styrene terpolymer (ABS) rubber, and styrene-maleic anhydride (SMA) copolymer. The blends have lower costs compared to polycarbonate and, in addition, show some property improvement. PET and PBT impart better chemical resistance and processability, ABS imparts improved processability, and SMA imparts better retention of properties on aging at high temperature. Poly(phenylene oxide) blended with high-impact polystyrene (HIPS) (polybutadiene-gra/f-polystyrene) has improved toughness and processability. The impact strength of polyamides is improved by blending with an ethylene copolymer or ABS rubber. 

High-impact polystyrene (HIPS) is produced by polymerizing styrene in the presence of a rubber, usually poly(l,3-butadiene). HIPS has improved impact resistance compared to polystyrene and competes with ABS products at low-cost end applications such as fast-food cups, lids, takeout containers, toys, kitchen appliances, and personal-care product containers. HIPS as well as ABS and SMA are used in physical blends with other polymers, such as polycarbonates, polyesters, and polyamides, to improve impact resistance (Sec. 2-13c-3). 

Preparation of a Polystyrene/Polybutadiene-Blend (High Impact Polystyrene, HIPS) by Polymerization of Styrene in the Presence of Polybutadiene... 

Another widely used copolymer is high impact polystyrene (PS-HI), which is formed by grafting polystyrene to polybutadiene. Again, if styrene and butadiene are randomly copolymerized, the resulting material is an elastomer called styrene-butadiene-rubber (SBR). Another classic example of copolymerization is the terpolymer acrylonitrile-butadiene-styrene (ABS). Polymer blends belong to another family of polymeric materials which are made by mixing or blending two or more polymers to enhance the physical properties of each individual component. Common polymer blends include PP-PC, PVC-ABS, PE-PTFE and PC-ABS. 

Characteristic functions and the representative structures of plastics additives providing marketable and durable materials are included in this chapter. Types of additives for plastics used in contact with food are listed in Table 3-1. Similar additives as for PS are used for elastomer-modified plastics forming multilayer systems (blends) and used rather exceptionally in contact with food, such as high-impact polystyrene (HIPS) or acrylonitrile-butadiene-styrene polymer (ABS). Some of the additives, stabilizers in particular, are very reactive and are present in the plastic matrix in a chemically transformed form. 

To improve the properties of PLA, plasticizers, special additives such as chain-extenders, polymer blends, and composites are commonly investigated. Martin and Averous (10) have studied the effects of various plasticizers on the properties of PLA. Pilla et al. (11-12) have investigated the effects of chain-extenders on the foaming properties of PLA. In addition, a vast number of studies have been conducted to enhance the properties of PLA by blending it with various polymers such as polyethylene oxide (PEO), polypropylene oxide (PPO), polyvinyl acetate, polyolefins, polystyrene, HIPS (high impact polystyrene), polyacetals, polycarbonate, and acrylonitrile butadiene styrene (ABS) (13-26). 

Super High Impact Polystyrene Based on Polystyrene and Butadiene-Styrene Block Polymer Blends... 

In the early 1940s, researchers at Dow produced interpolymer blends of styrene and butadiene by an emulsion process. The polymer, called Styralloy 22, was used as insulation for radar cables until it was displaced by low-density polyethylene produced by ICI. Later, Dow experimented with soluble GRS copolymerized with styrene to make high-impact polystyrene. 

Polystyrene (PS) in its atactic and syndiotactic forms is a brittle thermoplastic, even in an orientated state [4]. To improve the toughness of aPS, impact modification has been practised for a long time, either by polymerizing the styrene in the presence of a polybutadiene rubber leading to high-impact polystyrene, commonly called HIPS, or by blending the polystyrene with multi-block copolymers, mainly of the styrene-butadiene-styrene (S-B-S) type. 

There are a number of flame-retardant styrenic polymers that will be covered in this chapter. These include polystyrene itself, rubber-modified polystyrene [high-impact polystyrene (HIPS)] and rubber-modified styrene-acrylonitrile copolymer [acrylonitrile-butadiene-styrene (ABS)]. Blends with styrenic... 

A high-impact polystyrene that has much better optical clarity than that obtained by usual blending or grafting techniques can be prepared by our technique. Polymers containing 90-95% styrene grafted to polybutadiene rubber by use of 12 mmole RLi-TMEDA/100 gram polymer showed quite good optical clarity. 

Styrene CH2=CH 6 Polystyrene (PS) —(-CH,—CH 6" Transparent and brittle used for cheap molded objects, e.g., Styron, Carlnex, Hostyren, Lustrex. Modified with rubber to improve toughness, e.g.. High impact Polystyrene (HIPS) and acrylonitriie-butadiene-styrene copolymer (ABS). Expanded by volatilization of a blended blowing agent (e.g., pentane) to make polystyrene foam, e.g., Styrocell, Styrofoam. 

Saunders and Pelletier [1976] claim in a patent to have produced polymer blends having high impact resistance, by blending together a non-elastomeric monovinylidene aromatic polymer, such as polystyrene, with a radiation-crosslinked elastomeric copolymer, such as a block copolymer of styrene and butadiene. However, since in this work the blends were not irradiated, they will not be discussed here. 

Styrene-butadiene copolymers are often blended with other polymers. Transparent blends can be made with styrene, styrene-acrylonltrlle copolymers, or styrene-methyl methacrylate copolymers. Blends with styrene have low impact strength even at low styrene levels, while blends with styrene-methyl methacrylate copolymers can have greatly Improved impact strength. Blends with high impact polystyrene, polypropylene, and polycarbonate are opaque. 

The styrenic component in polystyrene-PPO blends may not necessarily be straight polystyrene (PS) but instead high-impact polystyrene (HIPS) or some other related material. The most widely used blend is the blend of PPO and HIPS. 

---