Hide, hides

The spherical shape has additional drawbacks. Because a sphere has the smallest possible surface area of all geometric shapes, its ability to develop opacity/ hide hide is low. Another difference is in settling behavior. A sphere will settle in a straight line while flakes move back and forth like a leaf. This effect can mainly be observed in reactive resin systems where enough time during the fluid stage is available to result in concentration differences of the aluminum in different sections of the part. 

Modem NDT film systems (with Pb screens) are very linear X-ray detectors. This is shown in fig.l for different NDT film systems and a X-ray tube at 160 kV. Note that for histoncal reasons the film response curve is often plotted as film density versus log (radiation dose), which hides this linear relationship. The film density is the difference between the measured optical film density and the fog density Db of the film base. 

We now consider the connection between the preceding equations and the theory of Aharonov et al. [18] [see Eqs. (51)-(60)]. The tempting similarity between the structures of Eqs. (56) and (90), hides a fundamental difference in the roles of the vector operator A in Eq. (56) and the vector potential a in Eq. (90). The fomrer is defined, in the adiabatic partitioning scheme, as a stiictly off-diagonal operator, with elements (m A n) = (m P n), thereby ensuring that (P — A) is diagonal. By contiast, the Mead-Truhlar vector potential a arises from the influence of nonzero diagonal elements, (n P /i) on the nuclear equation for v), an aspect of the problem not addressed by Arahonov et al. [18]. Suppose, however, that Eq. (56) was contracted between (n and n) v) in order to handle the adiabatic nuclear dynamics within the Aharonov scheme. The result becomes... 

Dienes, trienes, etc. 1650 (s) and 1600 (s) Lower-frequency band usually more intense and may hide or overlap the higher-frequency band... 

Protein-Based Adhesives. Proteia-based adhesives are aormaHy used as stmctural adhesives they are all polyamino acids that are derived from blood, fish skin, caseia [9000-71 -9] soybeans, or animal hides, bones, and connective tissue (coUagen). Setting or cross-linking methods typically used are iasolubilization by means of hydrated lime and denaturation. Denaturation methods require energy which can come from heat, pressure, or radiation, as well as chemical denaturants such as carbon disulfide [75-15-0] or thiourea [62-56-6]. Complexiag salts such as those based upon cobalt, copper, or chromium have also been used. Formaldehyde and formaldehyde donors such as h exam ethyl en etetra am in e can be used to form cross-links. Removal of water from a proteia will also often denature the material. 

Optical. The optical properties of fillers and the influence that fillers have on the optical properties of filled systems are often misunderstood. The key parameters in understanding the optical properties of fillers themselves are filler psd, color, and index of refraction. These characteristics influence the optical properties of filled composition, such as color, brightness, opacity, hiding power, and gloss. 

---