Glasse fluoride

Halide Glasses. Fluoride glasses are the most important of the haUde glasses. The only primary fluoride glass former is beryUium fluoride,... 

Uses fluoride compounds are used in making steel, chemicals, ceramics, lubricants, dyes, plastics, and pesticides fluorine and hydrogen fluoride are used to make certain chemical compounds hydrofluoric acid is used for etching glass fluorides are also added to drinking water, dental products, toothpaste, and mouth rinses... 

Sm + ions were for the first time introduced in glasses by Hirao et al. (1993) and Kurita and Kushida (1994). They used fluoride and borate glasses for the matrices of the Sm + ions. Samarium ions are generally incorporated as the trivalent state in glasses. Fluoride and borate compositions were melted in a glassy carbon crucible under a H2 gas atmosphere, where some Sm + ions are reduced to the Sm + during melting. 

Anhydrous hydrogen fluoride (as distinct from an aqueous solution of hydrofluoric acid) does not attack silica or glass. It reacts with metals to give fluorides, for example with heated iron the anhydrous iron(II) fluoride is formed the same product is obtained by displacement of chlorine from iron(II) chloride ... 

Aqueous hydrogen fluoride is a weak acid (see above) and dissolves silica and silicates to form hexafluorosilicic acid hence glass is etched by the acid, which must be kept in polythene bottles. 

The action of concentrated sulphuric acid liberates hydrogen fluoride, which attacks glass, forming silicon tetrafluoride the latter is hydrolysed to silicic acid by water, which therefore becomes turbid,... 

Grind finely pure laboratory grade, anhydrous potassium fluoride, and heat it in an electrically heated oven at 180-210° store in a desiccator. Before use, dry the powdered salt at 180° for 3 hours and grind again in a warm (ca. 50°) glass mortar. 

Fluorinated ethylene-propylene resin Poly(vinylidene fluoride) Ethylene-tetrafluoroethylene copolymer Ethylene- chlorotrifluoro- ethylene copolymer Cellulose- filled Glass-fiber- reinforced... 

The fluoride ion is capable of reacting with glass to form SiF4. 

Because hydrogen fluoride is extremely reactive, special materials are necessary for its handling and storage. Glass reacts with HF to produce SiF which leads to pressure buildup and potential mptures. Anhydrous hydrogen fluoride is produced and stored ia mild steel equipment. Teflon or polyethylene are frequently used for aqueous solutions. 

Manufacture. Fluoroborate salts are prepared commercially by several different combinations of boric acid and 70% hydrofluoric acid with oxides, hydroxides, carbonates, bicarbonates, fluorides, and bifluorides. Fluoroborate salts are substantially less corrosive than fluoroboric acid but the possible presence of HF or free fluorides cannot be overlooked. Glass vessels and equipment should not be used. 

Analytical Methods. Fluorite is readily identified by its crystal shape, usually simple cubes or interpenetrating twins, by its prominent octahedral cleavage, its relative softness, and the production of hydrogen fluoride when treated with sulfuric acid, evidenced by etching of glass. The presence of fluorite in ore specimens, or when associated with other fluorine-containing minerals, may be deterrnined by x-ray diffraction. 

For many years fluorine has been deterrnined by the Willard-Winters method in which finely ground ore, after removal of organic matter, is distilled with 72% perchloric acid in glass apparatus. The distillate, a dilute solution of fluorosiUcic acid, is made alkaline to release fluoride ion, adjusted with monochloroacetic acid at pH 3.4, and titrated with thorium nitrate, using sodium a1i2arine sulfonate as indicator. 

Fused sHica and Pyrex glass (qv) are not significantly attacked by halogen fluorides up to 100°C if HF is absent. 

Aqueous hydrogen fluoride of greater than 60% maybe handled in steel up to 38°C, provided velocities are kept low (<0.3 m/s) and iron pickup in the process stream is acceptable. Otherwise, mbber or polytetrafluoroethylene (PTFE) linings are used. For all appHcations, PTFE or PTEE-lined materials are suitable up to the maximum use temperature of 200°C. PTEE is also the material of choice for gasketing. AHoy 20 or Monel is typically used for valve and pump appHcations. Materials unacceptable for use in HE include cast iron, type 400 stainless steel, hardened steels, titanium, glass, and siHcate ceramics. 

Mercury(II) fluoride has been used in the process for manufacture of fluoride glass (qv) for fiber optics (qv) appHcations (11) and in photochemical selective fluorination of organic substrates (12). It is available from Advance Research Chemicals, Aldrich Chemicals, Johnson/Matthey, Aesar, Cerac, Strem, and PCR in the United States. The 1993 annual consumption was less than 50 kg the price was 800—1000/kg. 

TaF has been characterized by ir, Raman, x-ray diffraction, and mass spectrometry (3,11,12). TaF has been used as a superacid catalyst for the conversion of CH to gasoline-range hydrocarbons (qv) (12) in the manufacture of fluoride glass and fluoride glass optical fiber preforms (13), and incorporated in semiconductor devices (14). TaF is also a catalyst for the Hquid-phase addition of HF to polychlorinated ethenes (15). The chemistry of TaF has been reviewed (1,16—19). Total commercial production for TaF is thought to be no more than a few hundred kilograms aimuaHy. 

---