Gasoline removal

Residium is heavy petroleum from the bottom of a fractionator that has the lighter petroleum products, such as gasoline, removed by distillation. 

Description Effluents from cracking furnaces are cooled and processed for tar and heavy-gasoline removal. 

Copper Naphthenate Goggles or face shield plastic gloves (as for gasoline) Remove victim to fresh air. Wipe off and wash with soap and water. Wash with copious amounts of water for at least 15 minutes. 

Bert, J.A., J.A. Gething, T.J. Hansel, H.K. Newhall, R.J. Peyla and D.A. Voss (1983), A gasoline additive concentrate removes combustion chamber deposits and reduces vehicle octane requirement . SAE paper No. 83-1709, Fuels and Lubricants meeting, San Francisco, CA. 

Mobil MTG and MTO Process. Methanol from any source can be converted to gasoline range hydrocarbons using the Mobil MTG process. This process takes advantage of the shape selective activity of ZSM-5 zeoHte catalyst to limit the size of hydrocarbons in the product. The pore size and cavity dimensions favor the production of C-5—C-10 hydrocarbons. The first step in the conversion is the acid-catalyzed dehydration of methanol to form dimethyl ether. The ether subsequendy is converted to light olefins, then heavier olefins, paraffins, and aromatics. In practice the ether formation and hydrocarbon formation reactions may be performed in separate stages to faciHtate heat removal. 

Another ASTM test method. Potential Gum (D873), combines the existent gum and the oxidation stabihty tests to measure potential gum. A sample of gasoline is subjected to the oxidation stabihty test for 960 min, filtered to remove particulates, and then subjected to an existent gum test. The potential gum is expressed as the total (unwashed) gum in this test. 

Condensable hydrocarbons are removed from natural gas by cooling the gas to a low temperature and then by washing it with a cold hydrocarbon hquid to absorb the condensables. The uncondensed gas (mainly methane with a small amount of ethane) is classified as natural gas. The condensable hydrocarbons (ethane and heavier hydrocarbons) are stripped from the solvent and are separated into two streams. The heavier stream, which largely contains propane with some ethane and butane, can be Hquefied and is marketed as Hquefied petroleum gas (LPG) (qv). The heavier fractions, which consist of and heavier hydrocarbons, are added to gasoline to control volatihty (see Gasoline and other motor fuels). 

LPG recovered from natural gas is essentially free of unsaturated hydrocarbons, such as propylene and butylenes (qv). Varying quantities of these olefins may be found in refinery production, and the concentrations are a function of the refinery s process design and operation. Much of the propylene and butylene are removed in the refinery to provide raw materials for plastic and mbber production and to produce high octane gasoline components. 

The pressure used in producing gas wells often ranges from 690— 10,300 kPa (100—1500 psi). The temperature of the inlet gas is reduced by heat-exchange cooling with the gas after the expansion. As a result of the cooling, a liquid phase of natural gas liquids that contains some of the LPG components is formed. The liquid is passed to a set of simple distillation columns in which the most volatile components are removed overhead and the residue is natural gasoline. The gas phase from the condensate flash tank is compressed and recycled to the gas producing formation. 

The normal paraffins produced are raw materials for the manufacture of biodegradable detergents, plasticizers, alcohols, and synthetic proteins. Removal of the / -paraffins upgrades gasoline by improving the octane rating. 

---