Fourier transform infrared Raman

A rate enhancement effect due to secondary nucleation has been identified in the solution-mediated transformation of the 7-phase of (i)-glutamic acid to its / -phase [82]. In this study, the kinetics of the polymorphic transition were studied using optical microscopy combined with Fourier transform infrared, Raman, and ultraviolet absorption spectroscopies. The crystallization process of n-hexatriacontane was investigated using micro-IR methodology, where it was confirmed that single... 

Vibrational Spectroelectrochemistry Fourier Transform Infrared Raman, and Sum Frequency Generation... 

In addition to covering Raman microscopy, this book has a wealth of information on Raman instrumentation in general. Elving P J and Winefordner J D (eds) 1986 Fourier Transform Infrared Spectroscopy (New York Wiley)... 

As mentioned, we also carried out IR studies (a fast vibrational spectroscopy) early in our work on carbocations. In our studies of the norbornyl cation we obtained Raman spectra as well, although at the time it was not possible to theoretically calculate the spectra. Comparison with model compounds (the 2-norbornyl system and nortri-cyclane, respectively) indicated the symmetrical, bridged nature of the ion. In recent years, Sunko and Schleyer were able, using the since-developed Fourier transform-infrared (FT-IR) method, to obtain the spectrum of the norbornyl cation and to compare it with the theoretically calculated one. Again, it was rewarding that their data were in excellent accord with our earlier work. 

Principal component analysis has been used in combination with spectroscopy in other types of multicomponent analyses. For example, compatible and incompatible blends of polyphenzlene oxides and polystyrene were distinguished using Fourier-transform-infrared spectra (59). Raman spectra of sulfuric acid/water mixtures were used in conjunction with principal component analysis to identify different ions, compositions, and hydrates (60). The identity and number of species present in binary and tertiary mixtures of polycycHc aromatic hydrocarbons were deterrnined using fluorescence spectra (61). 

In this chapter, three methods for measuring the frequencies of the vibrations of chemical bonds between atoms in solids are discussed. Two of them, Fourier Transform Infrared Spectroscopy, FTIR, and Raman Spectroscopy, use infrared (IR) radiation as the probe. The third, High-Resolution Electron Enetgy-Loss Spectroscopy, HREELS, uses electron impact. The fourth technique. Nuclear Magnetic Resonance, NMR, is physically unrelated to the other three, involving transitions between different spin states of the atomic nucleus instead of bond vibrational states, but is included here because it provides somewhat similar information on the local bonding arrangement around an atom. 

QCMB RAM SBR SEI SEM SERS SFL SHE SLI SNIFTIRS quartz crystal microbalance rechargeable alkaline manganese dioxide-zinc styrene-butadiene rubber solid electrolyte interphase scanning electron microscopy surface enhanced Raman spectroscopy sulfolane-based electrolyte standard hydrogen electrode starter-light-ignition subtractively normalized interfacial Fourier transform infrared... 

Fourier transform infrared (FTIR) spectroscopy is the most popular method for determining the imidization process in the solid state and identifying specific substituents on the macromolecular backbone (e.g., CN, SO3H, CO, SO2).131 A method for calculating the diermal imidization extent based on FTIR data has been reported by Pride.132 Raman spectroscopy was used on the model study of PMDA-ODA condensation, and the possible formation of an inline bond by reaction of an amino group with an imide carboxyle was evidenced.133... 

Friedel-Crafts catalysts, 329, 331 Friedel-Crafts reaction, 297, 361 Front-end reactions, 235 FT Raman spectroscopy, 387 FTIR spectrometry. See Fourier transform infrared (FTIR) spectrometry Fuel cells, 272-273 Full prepolymers, 236, 237 Functionalized polyolefins, 459-460... 

Spectroscopy, 490. See also 13C NMR spectroscopy FT Raman spectroscopy Fourier transform infrared (FTIR) spectrometry H NMR spectroscopy Infrared (IR) spectroscopy Nuclear magnetic resonance (NMR) spectroscopy Positron annihilation lifetime spectroscopy (PALS) Positron annihilation spectroscopy (PAS) Raman spectroscopy Small-angle x-ray spectroscopy (SAXS) Ultraviolet spectroscopy Wide-angle x-ray spectroscopy (WAXS)... 

The basic methods of the identification and study of matrix-isolated intermediates are infrared (IR), ultraviolet-visible (UV-vis), Raman and electron spin resonance (esr) spectroscopy. The most widely used is IR spectroscopy, which has some significant advantages. One of them is its high information content, and the other lies in the absence of overlapping bands in matrix IR spectra because the peaks are very narrow (about 1 cm ), due to the low temperature and the absence of rotation and interaction between molecules in the matrix. This fact allows the identification of practically all the compounds present, even in multicomponent reaetion mixtures, and the determination of vibrational frequencies of molecules with high accuracy (up to 0.01 cm when Fourier transform infrared spectrometers are used). 

PyFTIR Pyrolysis-Fourier transform infrared RS Raman scattering/spectroscopy... 

With recent developments in analytical instrumentation these criteria are being increasingly fulfilled by physicochemical spectroscopic approaches, often referred to as whole-organism fingerprinting methods.910 Such methods involve the concurrent measurement of large numbers of spectral characters that together reflect the overall cell composition. Examples of the most popular methods used in the 20th century include pyrolysis mass spectrometry (PyMS),11,12 Fourier transform-infrared spectrometry (FT-IR), and UV resonance Raman spectroscopy.16,17 The PyMS technique... 

Computational methods were employed to predict molecular vibrations in 3-mercato-l,2,4-triazole 18 and 3,5-diamino-1,2,4-triazole 19 in order to fully assign the Fourier transform infrared (FTIR) and FT-Raman spectra of these molecules <2004SAA709, 2005SAA261>. 

An important tool for the fast characterization of intermediates and products in solution-phase synthesis are vibrational spectroscopic techniques such as Fourier transform infrared (FTIR) or Raman spectroscopy. These concepts have also been successfully applied to solid-phase organic chemistry. A single bead often suffices to acquire vibrational spectra that allow for qualitative and quantitative analysis of reaction products,3 reaction kinetics,4 or for decoding combinatorial libraries.5... 

The characterization of graphene often involves several techniques in conjunction in order to build up a complete picture of the material. The techniques typically include electron microscopy, Raman spectroscopy, X-ray photo-emission spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR) and thermal-gravimetric analysis (TGA). 

We have seen in the previous section that Raman spectra are complementary to infrared spectra. Both spectroscopies provide quite useful information on the phonon structure of solids. However, infrared spectra correspond to a range from about 100 cm to about 5000 cm that is, far away from the optical range. Thus, infrared absorption spectra are generally measured by so-called Fourier Transform InfraRed (FTIR) spectrometers. These spectrometers work in a quite different way to the absorption spectrophotometers discussed in Section 1.3. 

---