Formate, methyl preparation

Methyl formate was prepared in 1835 by Dumas by the action of dimethyl sulphate on sodium formate. Later, it was obtained in better yield by the reaction between magnesium or aluminium methylate and trioxymethylene. ... 

Formic acid may be obtained by the direct oxidation of methyl alcohol. Sodium formate is prepared industrially by heating sodium hydroxide at 210° with carbon monoxide under a pressure of eight atmospheres —... 

The salts of acetic acid and its homologues can be prepared by a reaction that resembles closely that by which sodium formate is prepared by the action of carbon monoxide on sodium hydroxide. When the gas is passed over heated sodium methylate, sodium acetate is formed. The equations written to express the similarity in the two reactions are as follows —... 

Metal and Metal Oxide Catalysts. Only a few examples are known on application of metal and metal oxide catalysts for carbonylation reaction. For example, it has been reported that benzyl alcohol could be carbonylated with CO to phenylacetic acid (with 100% selectivity) in the presence of rhodium metal Rh(0) (72). Methyl formate was prepared by treatment of CH3OH with CO in the presence of alkali earth metal oxide catalysts. The oxide catalysts are preferably CaO catalysts supported on oxides of group Ila (except Ca), Ilb, Ilia, or IVa metals. CH3OH was autoclaved with CaO/ZnO under 50 atm of CO at 180°C for 2 h to give 9.7% of methyl formate at 99.9% selectivity (73). 

Co (CO) 2, and (n -C5H5)(n -Ci4Phtj)Co. 35 As a consequence, alternate methods for the preparation of functionally substituted cyclo-pentadienyl metal compounds became an important goal of our research. Sodium cyclopentadienide containing aldehyde, ketone, and ester substituents can be made by the reactions of C5H5Na with ethyl formate, methyl acetate, methyl chloroformate, and dimethyl carbonate (Scheme l),36-39... 

Zhao et al. utilized the remarkable oxidative property of FIFA in a C-C bond formation to prepare an array of 3-arylquinolin-2-ones 120 (Scheme 26). FIFA-promoted oxidation of N-methyl-N-phenylcinnamamides 119 in the presence of a Lewis acid afforded 3-arylquinolin-2-ones in good yields. Formation of 3-arylquinolin-2-ones was realized through the FIFA-promoted simultaneous C-C bond formation and 1,2-aryl migration. This simple and metal-free FIFA-mediated green approach for the biologically important 3-arylquinolin-2-ones also widen the synthetic utility of hypervalent iodine reagents [42]. 

Sodamide should never be stored in a stoppered bottle from which samples are to be removed intermittently, since dangerous mixtures may result when the substance is exposed for 2-3 days to even limited amounts of air at the ordinary temperature. As a safe practice, sodamide should be used immediately after preparation, and should not be kept longer than 12-24 hours unless it be under an inert solvent. Even small amounts of unused sodamide should be removed from the apparatus in which it was made by washing with methyl or ethyl alcohol. In all cases where a yellowish or brownish colour develops, due to the formation of oxidation... 

P-Phenylethylamine is conveniently prepared by the hydrogenation under pressure of benzyl cyanide with Raney nickel catalyst (see Section VI,5) in the presence of either a saturated solution of dry ammonia in anhydrous methyl alcohol or of liquid ammonia the latter are added to suppress the formation of the secondary amine, di- P phenylethylamine ... 

Another preparative method for the enone 554 is the reaction of the enol acetate 553 with allyl methyl carbonate using a bimetallic catalyst of Pd and Tin methoxide[354,358]. The enone formation is competitive with the allylation reaction (see Section 2.4.1). MeCN as a solvent and a low Pd to ligand ratio favor enone formation. Two regioisomeric steroidal dienones, 558 and 559, are prepared regioselectively from the respective dienol acetates 556 and 557 formed from the steroidal a, /3-unsaturated ketone 555. Enone formation from both silyl enol ethers and enol acetates proceeds via 7r-allylpalladium enolates as common intermediates. 

Goto et al. (386) have qualitatively studied the relationship between the structure and the ease of formation of some 2-aryl- and 2-heteroaryl-A-2-thiazolin-4-one derivatives. It is found that 2-pyridyI, 2-benzimidazoyl, and 2- 6 hydroxy-5 -methyl)-benzothiazolyl derivatives are too unstable to be isolated. 6 -Hydroxy-, 6 -methyl-, and unsubstituted 2-benzothiazoiyl derivatives, as well as naphtothiazolyl derivatives are unstable but isolable. On the other hand, 6 -methoxy-. 6 -acetoxy-. and 5, 7 -dimethyl-6 -hvdroxybenzothiazolyl derivatives as well as most of their 5-methyl substituted derivatives are stable and easily prepared. 

As a method for the preparation of alkenes a weakness in the acid catalyzed dehydration of alcohols IS that the initially formed alkene (or mixture of alkenes) sometimes isomenzes under the conditions of its formation Write a stepwise mechanism showing how 2 methyl 1 butene might isomenze to 2 methyl 2 butene in the presence of sulfuric acid... 

It looks as though all that is needed is to prepare the acetylenic anion then alkylate it with methyl iodide (Section 9 6) There is a complication however The carbonyl group m the starting alkyne will neither tolerate the strongly basic conditions required for anion formation nor survive m a solution containing carbanions Acetyhde ions add to carbonyl... 

Another method of preparation involving methyl formate has been reported whereia the formate reacts with ammonia and methanol ia the presence of ammonium chloride at 255°C and 2.9 MPa (28.6 atm) (15). In this case, monomethylformamide is present ia considerable quantities as a by-product. 

Medroxyprogesterone acetate (74) is stmcturaHy related to and has been prepared from hydroxyprogesterone (39) (Fig. 10). Formation of the bis-ketal accomplishes the protection of the ketones and the required migration of the double bond. Epoxidation with peracetic acid produces a mixture of epoxides (75), with a predominating. Treatment of the a-epoxide with methyl magnesium bromide results in diaxial opening of the epoxide. Deprotection of the ketones provides (76), which is dehydrated to (77) by treatment with dilute sodium hydroxide in pyridine. Upon treatment with gaseous hydrochloric... 

Transesterification of methyl methacrylate with the appropriate alcohol is often the preferred method of preparing higher alkyl and functional methacrylates. The reaction is driven to completion by the use of excess methyl methacrylate and by removal of the methyl methacrylate—methanol a2eotrope. A variety of catalysts have been used, including acids and bases and transition-metal compounds such as dialkjitin oxides (57), titanium(IV) alkoxides (58), and zirconium acetoacetate (59). The use of the transition-metal catalysts allows reaction under nearly neutral conditions and is therefore more tolerant of sensitive functionality in the ester alcohol moiety. In addition, transition-metal catalysts often exhibit higher selectivities than acidic catalysts, particularly with respect to by-product ether formation. 

Ciesol and xylenol can be prepared by the methylation of phenol with methanol over both acid and base catalysts. It is postulated that phenol methylation on acid catalysts proceeds through the initial formation of anisole (methoxybenzene [100-66-3]) followed by intramolecular rearrangement of... 

Isomer separation beyond physical fractional crystallization has been accompHshed by derivatization using methyl formate to make /V-formyl derivatives and acetic anhydride to prepare the corresponding acetamides (1). Alkaline hydrolysis regenerates the analytically pure amine configurational isomers. 

The addition product, C QHgNa, called naphthalenesodium or sodium naphthalene complex, may be regarded as a resonance hybrid. The ether is more than just a solvent that promotes the reaction. StabiUty of the complex depends on the presence of the ether, and sodium can be Hberated by evaporating the ether or by dilution using an indifferent solvent, such as ethyl ether. A number of ether-type solvents are effective in complex preparation, such as methyl ethyl ether, ethylene glycol dimethyl ether, dioxane, and THF. Trimethyl amine also promotes complex formation. This reaction proceeds with all alkah metals. Other aromatic compounds, eg, diphenyl, anthracene, and phenanthrene, also form sodium complexes (16,20). 

The equihbrium shown in equation 3 normally ties far to the left. Usually the water formed is removed by azeotropic distillation with excess alcohol or a suitable azeotroping solvent such as benzene, toluene, or various petroleum distillate fractions. The procedure used depends on the specific ester desired. Preparation of methyl borate and ethyl borate is compHcated by the formation of low boiling azeotropes (Table 1) which are the lowest boiling constituents in these systems. Consequently, the ester—alcohol azeotrope must be prepared and then separated in another step. Some of the methods that have been used to separate methyl borate from the azeotrope are extraction with sulfuric acid and distillation of the enriched phase (18), treatment with calcium chloride or lithium chloride (19,20), washing with a hydrocarbon and distillation (21), fractional distillation at 709 kPa (7 atmospheres) (22), and addition of a third component that will form a low boiling methanol azeotrope (23). 

From Boric Oxide and Alcohol. To avoid removing water, boric oxide, B2O3, can be used in place of boric acid. The water of reaction (eq. 4) is consumed by the oxide (eq. 5). Because boric acid reacts with borates at high temperatures, it is necessary to filter the reaction mixture prior to distillation of the product. Only 50% of the boron can be converted to ester by this method. In cases where this loss can be tolerated, the boric oxide method is convenient. This is particularly tme for methyl borate and ethyl borate preparation because formation of the undesirable azeotrope is avoided. 

---