Fatty acids agents

The base lubricant is usually a petroleum oil while the thickener usually consists of a soap or soap mixture. In addition they may contain small amounts of free alkali, free fatty acid, glycerine, anti-oxidant, extreme-pressure agent, graphite or molybdenum disulphide. 

Residual monomers in the latex are avoided either by effectively reacting the monomers to polymer or by physical or chemical removal. The use of tert-huty peroxypivalate as a second initiator toward the end of the polymeri2ation or the use of mixed initiator systems of K2S20g and tert-huty peroxyben2oate (56) effectively increases final conversion and decreases residual monomer levels. Spray devolatili2ation of hot latex under reduced pressure has been claimed to be effective (56). Residual acrylonitrile also can be reduced by postreaction with a number of agents such as monoamines (57) and dialkylamines (58), ammonium—alkali metal sulfites (59), unsaturated fatty acids or their glycerides (60,61), their aldehydes, esters of olefinic alcohols, cyanuric acid (62,63), andmyrcene (64). 

Tetraethylene glycol may be used direcdy as a plasticizer or modified by esterification with fatty acids to produce plasticizers (qv). Tetraethylene glycol is used directly to plasticize separation membranes, such as siHcone mbber, poly(vinyl acetate), and ceUulose triacetate. Ceramic materials utilize tetraethylene glycol as plasticizing agents in resistant refractory plastics and molded ceramics. It is also employed to improve the physical properties of cyanoacrylate and polyacrylonitrile adhesives, and is chemically modified to form polyisocyanate, polymethacrylate, and to contain siHcone compounds used for adhesives. 

Many different types of foaming agents are used, but nonionic surfactants are the most common, eg, ethoxylated fatty alcohols, fatty acid alkanolamides, fatty amine oxides, nonylphenol ethoxylates, and octylphenol ethoxylates, to name a few (see Alkylphenols). Anionic surfactants can be used, but with caution, due to potential complexing with cationic polymers commonly used in mousses. 

Phospholipids. Phospholipids, components of every cell membrane, are active determinants of membrane permeabiUty. They are sources of energy, components of certain enzyme systems, and involved in Hpid transport in plasma. Because of their polar nature, phosphoUpids can act as emulsifying agents (42). The stmcture of most phosphoUpids resembles that of triglycerides except that one fatty acid radical has been replaced by a radical derived from phosphoric acid and a nitrogen base, eg, choline or serine. 

The second most common alkalinity control agent is lime [1305-78-8] normally in the form of calcium hydroxide [1303-62-0], used in both water and oH muds. In the latter, the lime reacts with added emulsifiers and fatty acids to stabHi2e water-in-oH emulsions. Lime is used in brine systems containing substantial quantities of soluble calcium and in high pH lime muds. Concentrations are ca 6—57 kg/m (2—20 lb /bbl) (see Lime AND LIMESTONE). 

Inositols, ie, hexaliydrobenzenehexols, are sugars that have received increasing study and are useful in the treatment of a wide variety of human disorders, including vascular disease, cancer, cirrhosis of the Hver, frostbite, and muscular dystrophy (269). Myoinositol esters prepared by reaction with lower fatty acid anhydrides are useful as Hver medicines and nonionic surfactants the aluminum and ammonium salts of inositol hexasulfate are useful anticancer agents (270). Tetraarjloxybenzoquinones are intermediates in the preparation of dioxazine dyes (266,271). The synthesis of hexakis(aryloxy)benzenes has also beenpubUshed (272). 

With mineral acids, the alkanolamines form ammonium salts which hydroly2e readily in the presence of water and dissociate on heating. Fatty acids, such as oleic, give soaps which are highly efficient emulsifying agents with important industrial uses, particularly the soaps of AMP (see Emulsions Surfactants). 

These oxazolines have cationic surface-active properties and are emulsifying agents of the water-in-oil type. They ate acid acceptors and, in some cases, corrosion inhibitors (see Corrosion). Reaction to oxazoline also is useful as a tool for determination of double-bond location in fatty acids (2), or for use as a protective group in synthesis (3). The oxazolines from AEPD and TRIS AMINO contain hydroxyl groups that can be esterified easily, giving waxes (qv) with saturated acids and drying oils (qv) with unsaturated acids. 

Emulsions. The fatty acid soaps of alkanolamines ate excellent emulsification agents for use in such products as floor poHshes, cosmetics, and functional fluids such as hydrauhc and metalworking fluids. For example, improved hardwater stabiUty of a hydrauhc fluid emulsion is obtained using AMP in the formulation (12). 

Nitrile Intermediates. Most quaternary ammonium compounds are produced from fatty nitriles (qv), which are ia turn made from a natural fat or oil-derived fatty acid and ammonia (qv) (Fig. 2) (see Fats AND FATTY oils) (225). The nitriles are then reduced to the amines. A variety of reduciag agents maybe used (226). Catalytic hydrogenation over a metal catalyst is the method most often used on a commercial scale (227). Formation of secondary and tertiary amine side-products can be hindered by the addition of acetic anhydride (228) or excess ammonia (229). In some cases secondary amines are the desired products. 

Release agents function by either lessening intermolecular interactions between the two surfaces in contact or preventing such close contact. Thus, they can be low surface-tension materials based on aUphatic hydrocarbon, fluorocarbon groups, or particulate soHds. The principal categories of material used are waxes, fatty acid metal soaps, other long-chain alkyl derivatives, polymers, and fluorinated compounds. 

---