Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Excluded Information

Five other kinds of data make no appearance in the indices. [Pg.286]

The name index generally omits telephone numbers because many employers explicitly discourage calls from job hunters. However, some companies including temporary stsiffing agencies encourage phone calls, so the name index includes their numbers. [Pg.286]

It names few personnel recruiters for either of two reasons. Small companies employ no staffers dedicated to recruiting. Alternatively, rapid staff turnover or changing work assignments makes the recruiters names irrelevant. Consequently, addressing them risks sending applications astray. [Pg.286]

Also omitted are firms striving to identify suitable biological targets for drug therapy. Such firms, also known as pharmaceutical companies, do no chemical development or discovery research. Consequently, they employ no organic chemists as researchers. [Pg.286]

For the same reason, the indices generally exclude contract research organizations limited to clinical development of drug candidates. Contract [Pg.286]


Since before World War II, multimillion pound quantities of cresols have been produced annually in the United States (O Brochta 1949), and domestic production and sales of cresols have steadily increased in recent years. Approximately 57.3 (USITC 1986), 73.3 (USITC 1988), and 82.3 (USITC 1989) million pounds of cresols were produced annually in the United States in 1986, 1987, and 1988, respectively. Respective sales were 56.6 (USITC 1986), 66.8 (USITC 1988), and 72.1 (USITC 1989) million pounds. These production totals include data on the manufacture of cresylic acid and exclude information on cresol production by coke and gas-retort ovens. The commercial mixture of cresol isomers, in which the m-isomer predominates and contains less than 5% phenol, is sometimes referred to as cresylic acid (Windholz et al. 1983). However, cresylic acids generally are composed of cresols, phenols, and xylenols they are defined as those mixtures in which over 50% will boil at temperatures above 204 C (Sax and Lewis 1987). In 1987, the national capacity for producing cresylics was 208 million pounds per year (CMR 1987). Information regarding the production levels of individual isomers and specific mixtures was unavailable. [Pg.77]

Our philosophy in preparing this book has been to include information that will help the user make decisions. In this respect, we envision each table to be something the user will consult when reaching a decision point in designing an analysis or interpreting results. We have deliberately chosen to exclude information that is merely interesting, but of little value at a decision point. [Pg.5]

It is regretted that the size of the volume has rendered the insertion of literature references impossible the Selected Bibliography (A,5) may partly compensate for this omission. Section numbers are now included in the headings of the pages—a feature introduced in response to requests by many readers. The volume comprises virtually at least three books under one cover, viz., experimental technique, preparations, and qualitative organic analysis. It should therefore continue to be of value as a one volume reference work in the laboratory. Students at all levels will find their requirements for laboratory work (excluding quantitative organic analysis) adequately provided for and, furthermore, the writer hopes that the book will be used as a source of information to supplement their theoretical studies. [Pg.1192]

Semiempirical calculations are set up with the same general structure as a HF calculation in that they have a Hamiltonian and a wave function. Within this framework, certain pieces of information are approximated or completely omitted. Usually, the core electrons are not included in the calculation and only a minimal basis set is used. Also, some of the two-electron integrals are omitted. In order to correct for the errors introduced by omitting part of the calculation, the method is parameterized. Parameters to estimate the omitted values are obtained by fitting the results to experimental data or ah initio calculations. Often, these parameters replace some of the integrals that are excluded. [Pg.32]

Every effort has been made to select the most useful and most reliable information and to record it with accuracy. However, the editor s many years of involvement with handbooks bring a realization of the opportunities for gremlins to exert their inevitable mischief. It is hoped that users of this handbook will offer suggestions of material that might be included in, or even excluded from, future editions and call attention to errors. These communications should be directed to the editor at his home address (or by telephone). [Pg.1288]

Examples in this table exclude those from tobacco. See references 36 and 37 for additional information. [Pg.538]

Most tanks store Hquid rather than gases or soHds. Characteristics and properties such as corrosiveness, internal pressures of multicomponent solutions, tendency to scale or sublime, and formation of deposits and sludges are vital for the tank designer and the operator of the tank and are discussed herein. Excluded from the discussion are the unique properties and hazards of aerosols (qv), unstable Hquids, and emulsions (qv). A good source of information for Hquid properties for a wide range of compounds is available (2). [Pg.308]

U.S. Geological Survey, Water Resources Data for New York, vol. 1 Eastern New York Excluding Eong Island—WaterYear 1988, E.S. Geological Survey Water Data Report NY 551, Springfield, Va., National Technical Information Service 1989. [Pg.205]

General price information for 1996 on commercially available xanthates from a Canadian company is given ia Table 5. Prices are approximate based oa tmckload shipments within the continental United States (excluding Alaska). [Pg.366]

If the comparison shows that the measurement is inconsistent with the comparison information, the measurement is considered suspecl. If a measurement can be compared to more than one set of information and found to be inconsistent with all, it is likely that the measurement is in error. The measurement should then be excluded from the measurement set. In this section, validation is extended to include comparison of the measurements to the constraints and initial adjustment in the measurements. Validation functions as an initial screening procedure before the more comphcated procedures begin. Oftentimes, vahdation is the only measurement treatment required prior to interpretation. [Pg.2566]

The hazard identification step of the QRA typically requires the greatest involvement of plant personnel. For an existing process, only plant personnel know the status of process equipment and the current operating and maintenance practices. Excluding those personnel from the hazard identification step increases the chance of overlooking important potential hazards. For accurate results, the QRA team must have access to this information. [Pg.32]

Information on defects can be obtained with good approximation from Eq. (3-5 la). The value of is all that is necessary for an overview. should be as high as possible to increase the sensitivity. In addition, to eliminate foreign voltages in the soil, it is necessary to switch the polarization current on and off with the help of a current interrupter periods of about 2 s off and 18 s on are convenient. Potential differences independent of the polarization current that are the result of foreign currents or electrode faults (see Section 3.2) are totally excluded by this method. On the other hand, the IR component of a compensation current can also be... [Pg.128]

These examples illustrate the relationship between kinetic results and the determination of reaction mechanism. Kinetic results can exclude from consideration all mechanisms that require a rate law different from the observed one. It is often true, however, that related mechanisms give rise to identical predicted rate expressions. In this case, the mechanisms are kinetically equivalent, and a choice between them is not possible on the basis of kinetic data. A further limitation on the information that kinetic studies provide should also be recognized. Although the data can give the composition of the activated complex for the rate-determining step and preceding steps, it provides no information about the structure of the intermediate. Sometimes the structure can be inferred from related chemical experience, but it is never established by kinetic data alone. [Pg.199]

Substances or preparations requiring to be labelled with the risk phrase R45 (may cause cancer) or R49 (may cause cancer by inhalation) under CHIPS are listed in Table 5.16 after the 5th edition of the Approved Supply List (Information approved for the classification and labelling of substances and preparations dangerous for supply). This list excludes certain coal and oil-based substances which attract the phrase R45 only when they contain a certain percentage of a marker substance (e.g. benzene). [Pg.91]

Information normally excluded from P I diagrams includes electrical wiring (normally separate electrical diagrams must be consulted), nonprocess equipment (e.g., hoist, support structures, foundations, etc.) and scale drawings of individual components. [Pg.6]

Provides information about all RCRA regulations and programs including the Resource Conseiwation and Recovery Act (RCRA) Comprehensive Environmental Response Compensation and Liability Act (CERCLA, or Superfund) and Emergency Planning and Community Right-to-Know Act (EPCRA)/Superfund Amendments Reauthorization Act (SARA) Title III. Operates weekdays from 9 00 a.m. to 6 00 p.m., EST, excluding Federal holidays. Sendees are also available in Spanish. [Pg.303]


See other pages where Excluded Information is mentioned: [Pg.81]    [Pg.45]    [Pg.249]    [Pg.286]    [Pg.138]    [Pg.236]    [Pg.460]    [Pg.1476]    [Pg.124]    [Pg.30]    [Pg.452]    [Pg.81]    [Pg.45]    [Pg.249]    [Pg.286]    [Pg.138]    [Pg.236]    [Pg.460]    [Pg.1476]    [Pg.124]    [Pg.30]    [Pg.452]    [Pg.327]    [Pg.72]    [Pg.494]    [Pg.1289]    [Pg.184]    [Pg.220]    [Pg.112]    [Pg.35]    [Pg.546]    [Pg.42]    [Pg.281]    [Pg.171]    [Pg.98]    [Pg.443]    [Pg.552]    [Pg.179]    [Pg.139]    [Pg.124]    [Pg.402]    [Pg.371]    [Pg.375]   


SEARCH



Exclude

© 2024 chempedia.info