Ethylenediaminetetraacetic acid, metal

The infrared spectra of ethylenediaminetetraacetic acid metal complexes have been used to distinguish between tetradentate, pentadentate or hexadentate coordination of the ligand on the basis of the absorption bands in the carbonyl region corresponding to free and complexed carbonyl groups. 

The utility of complexation titrations improved following the introduction by Schwarzenbach, in 1945, of aminocarboxylic acids as multidentate ligands capable of forming stable 1 1 complexes with metal ions. The most widely used of these new ligands was ethylenediaminetetraacetic acid, EDTA, which forms strong 1 1 complexes with many metal ions. The first use of EDTA as a titrant occurred in... 

Certain compounds, known as chelating agents (qv), react synergisticaHy with many antioxidants. It is beheved that these compounds improve the functional abiUties of antioxidants by complexing the metal ions that often initiate free-radical formation. Citric acid and ethylenediaminetetraacetic acid [60-00-4] (EDTA), C2QH2gN20g, are the most common chelating agents used (22). 

Other Additives. To provide and maintain the clarity of clear shampoos, the use of either ethyl or isopropyl alcohol maybe employed. Perfumes are added to make shampoos more pleasing in terms of odor, while dyes are incorporated to give visual aesthetics to the products. Salts of ethylenediaminetetraacetic acid are found to sequester and prevent formation of insoluble alkaline-earth metal salts. 

EthylenediaminetetraaceticAcid. Ethylenediaminetetraacetic acid (EDTAH has six potential donor groups two nitrogen atoms and four carboxylate groups. If EDTA 4— acts as a hexadentate ligand to a metal, the resulting complex contains five five-membered chelate rings and has a charge that is four less than that of the metal ion. 

Chromium (ITT) can be analy2ed to a lower limit of 5 x 10 ° M by luminol—hydrogen peroxide without separating from other metals. Ethylenediaminetetraacetic acid (EDTA) is added to deactivate most interferences. Chromium (ITT) itself is deactivated slowly by complexation with EDTA measurement of the sample after Cr(III) deactivation is complete provides a blank which can be subtracted to eliminate interference from such ions as iron(II), inon(III), and cobalt(II), which are not sufficiently deactivated by EDTA (275). 

Nickel also is deterrnined by a volumetric method employing ethylenediaminetetraacetic acid as a titrant. Inductively coupled plasma (ICP) is preferred to determine very low nickel values (see Trace AND RESIDUE ANALYSIS). The classical gravimetric method employing dimethylglyoxime to precipitate nickel as a red complex is used as a precise analytical technique (122). A colorimetric method employing dimethylglyoxime also is available. The classical method of electro deposition is a commonly employed technique to separate nickel in the presence of other metals, notably copper (qv). It is also used to estabhsh caUbration criteria for the spectrophotometric methods. X-ray diffraction often is used to identify nickel in crystalline form. 

EDTA (ethylenediaminetetraacetic acid, [60-00-4]) chelates any trace metals that would otherwise decompose the hydrogen peroxide [7722-84-1]. The amine is preheated to 55—65°C and the hydrogen peroxide is added over one hour with agitation the temperature is maintained between 60 —70°C. The reaction is exothermic and cooling must be appHed to maintain the temperature below 70°C. After all the peroxide has been added, the temperature of the reaction mixture is raised to 75°C and held there from three to four hours until the unreacted amine is less than 2.0%. The solution is cooled and the unreacted hydrogen peroxide can be destroyed by addition of a stoichiometric amount of sodium bisulfite. This may not be desirable if a low colored product is desired, ia which case residual amounts of hydrogen peroxide enhance long-term color stabiUty. 

A method suitable for analysis of sulfur dioxide in ambient air and sensitive to 0.003—5 ppm involves aspirating a measured air sample through a solution of potassium or sodium tetrachloromercurate, with the resultant formation of a dichlorosulfitomercurate. Ethylenediaminetetraacetic acid (EDTA) disodium salt is added to this solution to complex heavy metals which can interfere by oxidation of the sulfur dioxide. The sample is also treated with 0.6 wt % sulfamic acid to destroy any nitrite anions. Then the sample is treated with formaldehyde and specially purified acid-bleached rosaniline containing phosphoric acid to control pH. This reacts with the dichlorosulfitomercurate to form an intensely colored rosaniline—methanesulfonic acid. The pH of the solution is adjusted to 1.6 0.1 with phosphoric acid, and the absorbance is read spectrophotometricaHy at 548 nm (273). 

A mixture of dimethyl sulfate with SO is probably dimethyl pyrosulfate [10506-59-9] CH2OSO2OSO2OCH2, and, with chlorobenzene, it yields the 4,4 -dichlorodiphenylsulfone (153). Trivalent rare earths can be separated by a slow release of acid into a solution of rare earth chelated with an ethylenediaminetetraacetic acid agent and iodate anion. As dimethyl sulfate slowly hydrolyzes and pH decreases, each metal is released from the chelate in turn and precipitates as the iodate, resulting in improved separations (154). 

Metal Content. Two common analytical methods for determining metal content are by titration and by atomic absorption spectrophotometry (aas). The titration method is a complexiometric procedure utilizing the disodium salts of ethylenediaminetetraacetic acid (EDTA). The solvent, indicator. 

The complexers maybe tartrate, ethylenediaminetetraacetic acid (EDTA), tetrakis(2-hydroxypropyl)ethylenediamine, nittilotriacetic acid (NTA), or some other strong chelate. Numerous proprietary stabilizers, eg, sulfur compounds, nitrogen heterocycles, and cyanides (qv) are used (2,44). These formulated baths differ ia deposition rate, ease of waste treatment, stabiHty, bath life, copper color and ductiHty, operating temperature, and component concentration. Most have been developed for specific processes all deposit nearly pure copper metal. 

Ligands bite at one or more points. Chelants bite at two or more points, so all ligands are not necessarily chelants. Chelants forming water-soluble complexes with metal ions are called sequestrants (but not all sequestrants are chelants). The most commonly employed BW chelant, ethylenediaminetetraacetic acid (EDTA) produces coordination complexes with four points of attachment and is termed a tetraden-tate ligand. 

The oxidation of ethylenediaminetetraacetic acid (EDTA) by Pu02 and Np02 to give the quinquevalent metal ions in perchlorate media is first-order in both oxidant and substrate and the stoichiometry, d[M(VI)]/ A [EDTA], is 6 in both cases. The Np(VI) oxidation shows a fractional dependence on acidity and has parameters E = 23.0 kcal.mole , AS — 12.3 eu. 

Okemgbo A.A., Hill H.H., Metcalf S.G., and Bachelor M., Metal ion interferences in reverse polarity capillary zone electrophoretic analysis of Hanford Defense Waste for ethylenediaminetetraacetic acid (EDTA) and N-hydroxy-ethylethylenediaminetriacetic acid (HEDTA), Anal. Chim. Acta, 396,105,1999. 

Synergy between primary and secondary anti-oxidants occurs and often a mixture is employed. Also included are metal complexing agents, e.g., EDTA (ethylenediaminetetraacetic acid), citric acid, the purpose of which is to deactivate extraneous metal ions that catalyse polymer oxidation. 

The sodium and calcium salts of EDTA (ethylenediaminetetraacetic acid, Fig. 9.3.1.) are common sequestrants in food products. A three-dimensional representation of EDTA is shown in color Fig. 9.3.2. The EDTA ion is an especially effective sequestrant, forming up to six coordinate covalent bonds with a metal ion. These bonds are so named because a lone pair of electrons on a single atom serves as the source of the shared electrons in the bond between the metal ion and EDTA. The two nitrogen atoms in the amino groups and the oxygen... 

It is common for acid extracting solutions to contain ligands, such as fluoride, that, when combined with metals, increase their solubility. Chelates such as ethylenediaminetetraacetic acid (EDTA), which combine with metals and either bring them into solution or keep them in solution, are also commonly used. 

The usual source of EDTA for use in metal analysis is the disodium dihydrogen salt of ethylenedi-aminetetraacetic acid (Figure 5.20). This is the partially neutralized salt of ethylenediaminetetraacetic acid. 

As heavy metals were known to influence the degradation pathway, experiments were carried ont to determine if excess levels of metals could be the root cause of the degradation. EDTA (ethylenediaminetetraacetic acid) is a known metal chelator and is often used in ampoule formulations. The addition of EDTA to samples of ampoule solutions prepared in the lab was shown to halt the degradation (Table 2). 

A common reagent used in complexometric titrations is ethylenediaminetetraacetic acid (EDTA). It is often used to determine the concentration of metal ions present in a solution. 

One of the earlier observations concerning the activation process was that it was inhibited by iron chelators (9,27). Kennedy et al. (46) demtmstrated that the metal chelator ethylenediaminetetraacetic acid (EDTA) inlubits the activation process, even... 

Radium in hydrochloric acid solution may be separated effectively by ion exchange methods using cation exchange-resin columns. A weak HCl solution is passed through the column. The absorbed metals on the ion-exchange column are eluted with ethylenediaminetetraacetic acid (EDTA) at pH 6.25 or with ammonium citrate at pH 7.8. With either eluant, radium is eluted last, after removing barium and then lanthanum, calcium, magnesium, and other metals. 

Ethylenediaminetetraacetic acid, analogs, complexes of, 3 277 chelation by, 3 276-277 cobalt complex of, 3 281 complexes, 3 277-278 formation constant of, 3 273-274 -nickel, 3 17-18 stability of, 3 266-267 reaction with metal ions, 3 62 Ethylene dibromide, irradiation of, 5 196 4,5-Ethylenedithio-1,3-dithiole-2-thione based supramolecular complexes, 46 200-204 Ethylene glycol, 32 4... 

Concerns about the effect of TPP on eutrophication have led many states, cities, and regional governments to ban the use of the compound in syndets. Such bans have caused serious problems for detergent manufacturers, however, because no entirely satisfactory substitute for TPP has yet been found. Two promising candidates are the sodium salt of nitrilotriacetic acid, 3Na, N(CH2C02)3 , or NTA and ethylenediaminetetraacetic acid (EDTA). Both of these compounds act in much the same way as TPP, that is, by sequestering metal ions. Other builders that have been incorporated into syndet formulations include sodium carbonate, synthetic zeolites, borates, and organic polymers known as polycarboxylates. 

---