Methylation sodium hydride

Fig. 3. Synthesis of fluoxetine (31). 3-ChIoro-I-phenyl-I-propanol reacts with sodium iodide to afford the corresponding iodo derivative, followed by reaction with methylamine, to form 3-(methyl amin o)-1-phenyl-1-propan 0I. To the alkoxide of this product, generated using sodium hydride, 4-fluorobenzotrifluoride is added to yield after work-up the free base of the racemic fluoxetine (31), thence transformed to the hydrochloride (51)...

Aromatic aldehydes (100), eg, cinnamaldehyde, and ketones (101) react ia a similar manner (eq. 4). Ketones containing reactive methyl or methylene groups give with succiaates, ia the presence of sodium hydride, both the Stobbe condensation and the formation of diketones by a Claisen mechanism (102) (eq. 5). 

Methylation. Methylating agents such as methyl sulfate and methyl iodide react with coumarin in the presence of sodium hydride to give methyl 2-methoxycinnamate [15854-58-7] (29). 

The Reissert compound obtained from phthalazine and potassium cyanide in the presence of benzoyl chloride can be converted with methyl iodide and sodium hydride in DMF into... 

B. -Butyl- a-methyl- >-2-octalone. A 250-ml., three-necked flask equipped with a magnetic stirring bar, a reflux condenser, a 50-ml., pressure-equalizing funnel, and a rubber septum is charged with 1.4 g. (0.032-0.036 mole) of 55-60% sodium hydride dispersion in mineral oil... 

Methylindole has been prepared from the a5-methylphenyl-hydrazone of pyruvic acid, by the action of sodium amide or sodium hydride on indole followed by methyl iodide at elevated temperatures,by treatment of indole with methyl p-toluene-sulfonatc and anhydrous sodium carbonate in boiling xylene, and by the action of inelhyl sulfate on indole previously treated... 

An example of this is found in the synthesis of a crown containing a mefa-xylylene unit (see also Sect. 3.5) and a convergent methoxyl group. 4-Methyl-2,6-bishydroxymethyl-anisole was treated with pentaethylene glycol and sodium hydride in THF solution to afford the crown (mp 71—73°) shown in Eq. (3.52) in 59% yield. 

Attempts to methylate the 6,11-diketone (12) under the conditions described above or with sodium hydride in benzene were unsuccessful. However, addition of methyl iodide to a refluxing suspension of sodium hydride in a solution of (12) in xylene affords the 5 -methyl compound (13) in about 37 % yield. ... 

The final variation of the Feist-Benary furan synthesis encompasses reactions of 1,3-dicarbonyls with 1,2-dibromoethyl acetate (52). For example, treatment of ethyl acetoacetate (9) with sodium hydride followed by addition of 52 at 50°C yields dihydrofuran 53. The product can be easily converted into the corresponding 2-methyl-3-furoate upon acid catalyzed elimination of the acetate, thus providing another strategy for the synthesis of 2,3-disubstituted furans. 

Alkylation at the ind-N of l,2,3,4-tetrahydro-j8-carbolines has been carried out with alkyl halide after treatment with sodamide in the usual manner. Cyanoethylation of a p /r-V-substituted tetrahydro-jS-carboline in the presence of Triton B yields the corresponding 9-cyanoethyl derivative. Similarly, treatment of p / -V-methyl-l,2,3,4,4a,9b-hexahydro-y-carboline with sodamide, followed by benzyl chloride, leads to the ind-A -benzyl-substituted derivatives. l-Oxo-l,2,3,4-tetrahydro-j8-carboline yields the ind-A -methyl derivative directly with dimethyl sulfate.Prolonged treatment with sodium hydride, followed by methyl iodide, yields the 2,9-dimethyl derivative. Heating with sodium hydride in acetone followed by the addition of dimethyl sulfate gives rise to the ind-V-methyl derivative. ... 

Tire 2-dimethylamino derivatives 147 were prepared by a three-step reaction pathway that comprised (a) methylation of the 2-acetamido derivative 144 with methyl iodide and sodium hydride to 145, (b) mild acid-catalyzed N-deacetylation of 145 to 146, and (c) further methylation of 146 to the 2-dimethylamino compound 147 (90JMC1230) (Scheme 57). 

Treatment of the pyrrolidine derivative 130 with sodium hydride followed by A-methyl piperazine afforded pyrrolidino[l,2-a]quinolinone 4-carboxy-late 131 (93JPR397) (Scheme 25). 

In a similar scheme, acylation of 2-methoxynaphthalene gives ketone, 15. This is then converted to the acetic acid by the Wilgerodt reaction. Esterification, alkylation of the carbanion (sodium hydride methyl iodide), and finally saponification affords naproxen (17). The intense current effort on nonsteroid antiinflammatory agents and acrylacetic acids in particular make... 

Carbethoxycyclooctanone (40 g, 0.2 mole) dissolved in 50 ml of dry benzene is added to the stirred sodium hydride over about 30 minutes at room temperature. The mixture is stirred an additional hour at room temperature to complete the formation of the sodium salt. Methyl iodide (284 g, 2.0 mole, a 10-fold excess) is added to the stirred solution over 1 hour and the stirring at room temperature is continued for 20-24 hours. The reaction mixture is poured cautiously into 500 ml of 3 aqueous acetic acid, and the aqueous solution is extracted three times with 100-ml portions of benzene. The combined benzene extracts are washed three times with water and dried over anhydrous magnesium sulfate. Benzene and excess methyl iodide are removed under reduced pressure (rotary evaporator) and the residue is distilled. 

Sodium hydride, 50% dispersion in mineral oil Alpha Inorganics 2-Carbethoxycyclooctanone (Chapter 10, Section I) 2-Methylcyclohexanone A, EK Methyl vinyl ketone MCB, A... 

Step G 4-fOrtho-(2, 3 -Dihydroxypropyloxycarbonyl)-Phenyl]-Amino-8-Trifluoromethyl-quinoHne Acetonide — 100 cc of toluene were added to 80 cc of 2,2-dimethyl-4-hydroxy-methyl-1,3-dioxolane and the toluene was distilled off under reduced pressure to eliminate the water present. To the anhydrous 2,2-dimethyl-4-hydroxymethyl-1,3-dioxolane thus obtained, 0.25 gram of an oily 50% suspension of sodium hydride and then 21.3 grams of 4-... 

Methyl-5-methoxy-3-mdolyl acetic acid Sodium hydride... 

B) A mixture of 2.4 parts of 1 acetyl-4-(4-hydroxyphenyl)piperazine, 0.4 part of sodium hydride dispersion 78% 75 parts of dimethylsulfoxide and 22.5 parts of benzene is stirred for one hour at 40°C. Then there are added 4.2 parts of cis-2-(2,4-dichlorophenyl)-2-(1 H-imidazol-1 -ylmethyl)-1,3-dioxolan-4-ylmethyl methane sulfonate and stirring is continued overnight at 100°C. The reaction mixture Is cooled and diluted with water. The product is extracted with 1,1 -oxybisethane. The extract is dried, filtered and evaporated. The residue Is crystallized from 4-methyl-2-pentanone. The product is filtered off and dried, yielding 3.2 parts (59%) of cis-1-acetyl-4-[2-(2,4-dichlorophenyl)-2-(1 H-imidazol-1-ylmethyl)-13-di-oxolan-4-ylmethoxy] phenyl] piperazine MP 146°C. 

Notable examples of general synthetic procedures in Volume 47 include the synthesis of aromatic aldehydes (from dichloro-methyl methyl ether), aliphatic aldehydes (from alkyl halides and trimethylamine oxide and by oxidation of alcohols using dimethyl sulfoxide, dicyclohexylcarbodiimide, and pyridinum trifluoro-acetate the latter method is particularly useful since the conditions are so mild), carbethoxycycloalkanones (from sodium hydride, diethyl carbonate, and the cycloalkanone), m-dialkylbenzenes (from the />-isomer by isomerization with hydrogen fluoride and boron trifluoride), and the deamination of amines (by conversion to the nitrosoamide and thermolysis to the ester). Other general methods are represented by the synthesis of 1 J-difluoroolefins (from sodium chlorodifluoroacetate, triphenyl phosphine, and an aldehyde or ketone), the nitration of aromatic rings (with ni-tronium tetrafluoroborate), the reductive methylation of aromatic nitro compounds (with formaldehyde and hydrogen), the synthesis of dialkyl ketones (from carboxylic acids and iron powder), and the preparation of 1-substituted cyclopropanols (from the condensation of a 1,3-dichloro-2-propanol derivative and ethyl-... 

We now tum our attention to the C21-C28 fragment 158. Our retrosynthetic analysis of 158 (see Scheme 42) identifies an expedient synthetic pathway that features the union of two chiral pool derived building blocks (161+162) through an Evans asymmetric aldol reaction. Aldehyde 162, the projected electrophile for the aldol reaction, can be crafted in enantiomerically pure form from commercially available 1,3,4,6-di-O-benzylidene-D-mannitol (183) (see Scheme 45). As anticipated, the two free hydroxyls in the latter substance are methylated smoothly upon exposure to several equivalents each of sodium hydride and methyl iodide. Tetraol 184 can then be revealed after hydrogenolysis of both benzylidene acetals. With four free hydroxyl groups, compound 184 could conceivably present differentiation problems nevertheless, it is possible to selectively protect the two primary hydroxyl groups in 184 in... 

---