Ether chemical property

Metallo-organic compounds possess high reactivity to water, oxygen and nearly all organic solvents, except hydrocarbons and ethers. Chemical properties of the suggested surface complexes of the type M )f in presence of various solvents are unknown. However,... 

Diethyl ether is a mobile, colourless liquid having b.p. 35° and dy 0720. It has a characteristic odour, and a burning taste. It is used chiefly as a solvent, and was formerly widely used as an anaesthetic owing to its chemical non-reactivity, it is very seldom used actually as a reagent, except in the preparation of Grignard reagents (p. 280) where probably its chemical properties reinforce its solvent action. 

Separations based upon differences in the chemical properties of the components. Thus a mixture of toluene and anihne may be separated by extraction with dilute hydrochloric acid the aniline passes into the aqueous layer in the form of the salt, anihne hydrochloride, and may be recovered by neutralisation. Similarly, a mixture of phenol and toluene may be separated by treatment with dilute sodium hydroxide. The above examples are, of comse, simple apphcations of the fact that the various components fah into different solubihty groups (compare Section XI,5). Another example is the separation of a mixture of di-n-butyl ether and chlorobenzene concentrated sulphuric acid dissolves only the w-butyl other and it may be recovered from solution by dilution with water. With some classes of compounds, e.g., unsaturated compounds, concentrated sulphuric acid leads to polymerisation, sulphona-tion, etc., so that the original component cannot be recovered unchanged this solvent, therefore, possesses hmited apphcation. Phenols may be separated from acids (for example, o-cresol from benzoic acid) by a dilute solution of sodium bicarbonate the weakly acidic phenols (and also enols) are not converted into salts by this reagent and may be removed by ether extraction or by other means the acids pass into solution as the sodium salts and may be recovered after acidification. Aldehydes, e.g., benzaldehyde, may be separated from liquid hydrocarbons and other neutral, water-insoluble hquid compounds by shaking with a solution of sodium bisulphite the aldehyde forms a sohd bisulphite compound, which may be filtered off and decomposed with dilute acid or with sodium bicarbonate solution in order to recover the aldehyde. 

Combustion in air is of course a chemical property of ethers that IS shared by many other organic compounds Write a balanced chemical equa tion for the complete combustion (in air) of diethyl ether... 

The most striking chemical property of epoxides is their far greater reactivity toward nude ophilic reagents compared with that of simple ethers Epoxides react rapidly with nude ophiles under conditions in which other ethers are inert This enhanced reactivity results from the angle strain of epoxides Reactions that open the nng relieve this strain... 

Chemical Properties. A combination of excellent chemical and mechanical properties at elevated temperatures result in high performance service in the chemical processing industry. Teflon PEA resins have been exposed to a variety of organic and inorganic compounds commonly encountered in chemical service (26). They are not attacked by inorganic acids, bases, halogens, metal salt solutions, organic acids, and anhydrides. Aromatic and ahphatic hydrocarbons, alcohols, aldehydes, ketones, ethers, amines, esters, chlorinated compounds, and other polymer solvents have Httle effect. However, like other perfluorinated polymers,they react with alkah metals and elemental fluorine. 

Table 2. Typical Physical and Chemical Properties of Commonly Used Ethers ...

Greater selectivity in purification can often be achieved by making use of differences in chemical properties between the substance to be purified and the contaminants. Unwanted metal ions may be removed by precipitation in the presence of a collector (see p. 54). Sodium borohydride and other metal hydrides transform organic peroxides and carbonyl-containing impurities such as aldehydes and ketones in alcohols and ethers. Many classes of organic chemicals can be purified by conversion into suitable derivatives, followed by regeneration. This chapter describes relevant procedures. 

The very different geometry of the ether linkages in starch and cellulose causes these two polymers to have different chemical properties. 

The chemical properties of DPM have been probed with each of the procedures identified earlier. This carbene is known to react with alcohols to give ethers (Kirmse, 1963 Bethell et al., 1965), it adds to olefins non-stereospecifically to form cyclopropanes (Skell, 1959 Baron et al., 1973 Gaspar et al., 1980 Tomioka et al., 1984), and it is rapidly converted to a carbonyl oxide with oxygen (Werstiuk et al., 1984 Casal et al., 1984). 

Teflon HP Plus copolymers, 18 331 in lotus effect surfaces, 22 117 Teflon PFA. See also Tetrafluoroethylene-perfluorovinyl ether applications of, 18 338-339 chemical properties of, 18 332-333 economic aspects of, 18 338 electrical properties of, 18 334 health and safety factors related to, 18 338... 

Polypropylene ether) polyol is the single most important product from propylene oxide and enjoys a predominant position in polyurethane applications. The ether linkages are very abundant in these polyols and they contribute to the physical and chemical properties in many applications such as surfactant action and hydrogen-bond formation. 

Evidence for this was based on chemical properties of the ether solutions of the reagent as well as IR spectra of the solutions compared with independently prepared 9 (42). 

Shinoda, K., Yamanaka, T., andKinoshita, K. Surface chemical properties in aqueous solutions of non-ionic surfactants octyl glycol ether, a-octyl glyceryl ether and octyl glycoside. J. Phys. Chem., 63(5) 648-650,1959. 

The physical chemical properties of the surfactants that contain an ester bond between the hydrophobic tail and the polar head group are very similar to those of alcohol ethoxylates of the same alkyl chain length and the same number of oxyethylene units. The CMC and the cloud point values of the linear ester surfactant 1 of Fig. 4 are approximately the same as those of the straight chained alcohol ethoxylate tetra(ethylene glycol)monooctyl ether (C8E4), i.e., around 10 mM and 40 °C, respectively. Thus it appears that the... 

Chemical properties of glycols. They are similar to those of aliphatic alcohols and the glycols may be oxidized (in the vapor phase and in the presence of catalysts) to the corresponding acids. They are easily estertfied by inorganic and organic acids to form, esters. Ethers (such as methyl, ethyl etc) may be prepd by treating... 

The most intriguing difference between the chemical properties of cyclopolysilanes and those of cycloalkanes is the ability of the former to form either anion or cation radicals upon one-electron reduction or oxidation, respectively. For example, the cyclic pentamer (Mc2Si)5 is reduced to the corresponding radical anion by sodium-potassium alloy in diethyl ether [see eqn (4.1) in Section 4.1.3], whereas the hexamer (Me2Si)6 is oxidised by aluminium trichloride in dichlor-omethane to the corresponding cation radical. In both cases the EPR spectra of the radical ions can be interpreted in terms of a-electron delocalisation over the entire polysilane ring (see Section 10.1.4.1). In this respect, the cyclosilanes resemble aromatic hydrocarbons rather than their aliphatic analogues. 

The chemistry of saturated heterocyclic compounds is characteristic of their functional group. For example, nitrogen compounds are amines, oxygen compounds arc ethers, sulfur compounds are sulfides. Differences in chemical reactivity are observed for three-membered rings, e.g., epoxides, whose enhanced reactivity is driven by the relief of their severe ring strain. This chapter discusses heterocycles that are aromatic and have unique chemical properties. 

Treatment of chromium (III) acetylacetonate with acetic anhydride and boron trifluoride etherate yielded a complex mixture of acetylated chelates but very little starting material. Fractional crystallization and chromatographic purification of this mixture afforded the triacetylated chromium chelate (XVI), which was also prepared from pure triacetylmethane by a nonaqueous chelation reaction (8, 11). The enolic triacetylmethane was prepared by treating acetylacetone with ketene. The sharp contrast between the chemical properties of the coordinated and uncoordinated ligand is illustrated by the fact that chromium acetylacetonate does not react with ketene. 

Polybrominated Diphenyl Ethers. Information found in the literature regarding the physical and chemical properties of selected technical PBDE mixtures is presented in Table 4-6. 

---